Це відео не доступне.
Перепрошуємо.
How To Change Filament On Your Creality K1
Вставка
- Опубліковано 19 тра 2023
- I show How To Quickly And Easily Change Filament On Your Creality K1
~-~~-~~~-~~-~
Please watch: "Bambu Lab AMS First Print with Bambu Lab P1P: The Ultimate Multi Color 3D Printing System"
• First Look: Bambu Lab ...
~-~~-~~~-~~-~
If you liked what you watched! SUBSCRIBE So we can grow quicker together --> bit.ly/3IA7UfO also Check out the latest video ---> bit.ly/44gPhWp
Note- you should also unlock before pulling the filament out- notice there’s a little bulb of filament more than there would’ve been, this helps avoid clogs. Learned this way back on a makerbot, and saw it repeated by Creality and community
Unlock before remove the filament, the melted part can remain inside the extruder.
I've owned this printer since the beginning of the year, and it has never retracted the filament to where a can grab a bit of it at the loading tube and pull it out. Every time, I need to remove the tube from the print head. After the 20 to 30 rolls I have printed so far, that connection into the print head is getting g torn up. I noticed you have a different gear box than mine. Yours has a blue clip. Mine doesn't. Mine has a metal thing with teeth that bite into the tube. BTW, great video, as this is the 1st time I've ever seen or heard of how it is supposed to work.
Mine didn't retract so that I could pull it out from the back. Had to take the tube out from the extruders end.
Keep up the great content. I don't have a k1 but I think beginner steps such as this helps everyone interested in the k1. Will you be getting the k1 max when it releases?
Thank you! If I see much difference, sure.
I ended up extruding the remaining piece after my K1C Max run out sensor paused because if the retract function was used it would not be at the point where I could pull it 😅. So I just melted the remaining and pushed the new PLA trough
Thank you perfekt so I can start. I am a little bit worry about.
thanks for short video
Do we have to unlock the extruder, I do mine without it and it works completely fine so far.
Yes, for loading the filament. If it works fine the way it is, keep using it. If it give you problem, they try unlocking it
@@Razer3DP Thank you 👍👍
Mine used to extrude for the first few weeks. Now it is a POS... I can manually extrude with the latch open, but the extruder can't push PLA through even at 240 C. E-mailed support 2 days ago, but nothing yet.
You didn’t mention trying to unclog the extruder so if this happens with any 3D printer it’s the next thing to do- Creality has a tutorial video on UA-cam for all troubleshooting steps, including clearing the throat but since yours manually extrudes it’s for sure likely a bit of dried filament in the extruder. It comes apart very easily using the tools included.
Mines won't extrude at all, just got it last night , never got it to print
You opened the latched and pushed to get the Filament into the extruden, the closed the lock. Try that
pain in butt to do all this once you have a bambu with AMS this seems to be a hassle.
Bambu AMS for the win. I preload my top used colors and forget till I run I out.
If you want to put up with all of the filiment wasted and slow print speed when doing multiple filiment changes. Buy a Bambu printer like I did.
@@tabhinton6678 Slow print speeds?
your printer must be broken the only printer that can keep up with my P1P is my K1 Max with extreme tuning. try using another multi color printer and see how slow its going to be. multi material printing is always slow
Screen is exactly like the bambu x1c
Very much!
Non si capisce bene questo video😢
its a shitty rip off of an x1c i have both and the k1 homed to hard and dammaged my bed now it wont turn on my x1c has done 5000 hours with out one fail i think i know who wins here
Have you sent creality a email. I'll return if you in the return window
@@Razer3DP yes I have it's been it's been almost a month no reply creality customer service is a Pos on the other hand when I contacted bamboo because my machine wasn't homing properly they got back to me in the morning and pushed out a software update for my machine to make sure it was running right
@@josefsteiner9401 Keep sending them emails every day till they reply. Should not be like that
@@Razer3DP I shouldn't have to keep sending emails I should have to only send one email or open one ticket and then they respond to me that's what a good business does and solve the problem immediately when you just paid about half a grand one of their machines 🙄🙄🙄
Never had an issue with mine. Also Creality has been making corexy machines for about 5 years.
You can't even string a proper sentence together 🙄 🤦♂️
Thank you! For the comment
The f*ck is wrong with you? How about you try and string 2 braincells together and think that maybe English isn't his native language? People like you are what hold back society.