Anything on a is300 that holds up the front from getting low besides getting shortened spindles. I feel like every other is300 bagged is lower in front than mine lol
You can get just rear uppers, but unless you have adjustable lowers you might not be able to get a good alignment. Uppers will give like -12 but can’t promise you’ll be able to get toe in spec
Camera, these were nothing special just videos up and down the street. For all other actual rollers and such both phone and camera, doesn’t make much of a difference tbh
@@OCTANEANDZIPTIES dope, I need rollers but me and my mate have no idea what we’re doing lmao. I have a camera but will probably practice with a phone first. Ty 🤘🏼
No matter what you use, it can all look good, if you have any sort of editing software it never hurts to upload it and stabilize it. That’s how you see so many steady rollers. If not, just try and do your best with your hand/phone. All the same😎
@@OCTANEANDZIPTIES not the most quality brand as far as the ball joints theyre known to blow out, a homie lost his car cause his rear toe arm broke getting onto a highway sent him into a wall at 45. Godspeed toe arms and camber arms 🤷🏼♂️
Had the Q50/Q60 that sent into the wall? I know him as well. Also depends on which generation ball joints, the old ones had to have washers on the top so the ball joints didn’t pop out, the newer ones don’t. Believe me I understand difference in qualities, but nothing wrong with these.
@@OCTANEANDZIPTIES it wasnt a q50 but yes i did hear about that it was on a homie from jerseys subaru wagon. It wasnt even low or static but yea im not hating on your work g you do good stuff. Just dont trust godspeed
Yes but today we actually put the tears back on with a small slip on so the barrel didn’t hit the coilover and they fit without rubbing. The 5in lips fit with ease
@@OCTANEANDZIPTIES I soak from experience. I'm 41, I did all this in like 2003 with a GS300. That camber kit is uncomfortable and terrible overall for tire usage, gas milage, and body frame. But have fun...
The camber kit is uncomfortable? Camber kits don’t differ in ride comfort lol, it’s all adjustable arms. If you’re talking about the coil over spring rate, it’s actually pretty nice. Not too soft but not stiff, especially tucking you don’t need high spring rates. Camber and height (in this sense being low) has nothing to do with gas mileage. Tires are a part of stance and we understand they don’t “last as long”. Body and Frame is completely fine, if you go back and look at some of my videos, I have made my own frames and reinforcement to go lower the correct way. Hope I answered each part of your remark👍 sad a 41 year old man would comment negatively under someone video because you personally don’t like it. Some people just never grow up I guess, have a good one 🙌
My man always making sure to explain everything. It's a lost art these days. Thank you !!
the color of the car is insane !
let’s go Logan !! excited to see this
Good looks! Phase 1!
any new arms out or tricks to get around -9 up front without cutting spindles?
The sonata on bags whattttt 🔥🔥
My boy @hedrcxx on IG
Do you have to replace coilovers to add camber on the gs? Would it work with stock suspension
awesome video, this helped me with my build . ty brother
are the parts identical to the gs300?
What specs where the fronts… the cr Kai’s if you remember I’d greatly appreciate it I’m trying to do -7 or so all around i love how the fronts fit.
I believe they were 18x9.5 +12 or +15 (-7 to -10 should have them fit quite well, and pretty easy to achieve)
@@OCTANEANDZIPTIES what was the issue with needing shortened spindies before flipping the front uca piece?
Love the content bro
Thank you!
is this the same as the is300 i was looking to buy this same kit and found a cheaper kit but it’s for the is300 and i have the gs300
I do not believe they are compatible sadly
Anything on a is300 that holds up the front from getting low besides getting shortened spindles. I feel like every other is300 bagged is lower in front than mine lol
You think the gs fuca is the same as the ucf20?
No sir, completely different designs sadly
Why people bash god speed? To be on honest it look just like Megan’s. Great vid!!! How does it ride??
Purple???
How do you camber the front? I have an 16’ LS460 want the front done
Either front upper control arms or tilted spindles. If you want yours spindles done lmk on IG!
I need more updates on thissss
Dimensions of the white wheels
They are actually 18x11 and 18x12. 5in and 6in lips
What parts do you need for the rear camber you have, I already have Megan traction bars on
You can get just rear uppers, but unless you have adjustable lowers you might not be able to get a good alignment. Uppers will give like -12 but can’t promise you’ll be able to get toe in spec
What do y’all plan on doing undercarriage wise for the scraping?
It's a self solving problem
Great video 💯🫡
Thank you
We’re his spindles cut?
Yes
Curious if you use a phone or a camera for rollers?
Camera, these were nothing special just videos up and down the street. For all other actual rollers and such both phone and camera, doesn’t make much of a difference tbh
@@OCTANEANDZIPTIES dope, I need rollers but me and my mate have no idea what we’re doing lmao. I have a camera but will probably practice with a phone first. Ty 🤘🏼
No matter what you use, it can all look good, if you have any sort of editing software it never hurts to upload it and stabilize it. That’s how you see so many steady rollers. If not, just try and do your best with your hand/phone. All the same😎
Where’s the best place to get shortened spindles for these? I’m not trying to get scammed 😂
Send them to me like everyone else does and I’ll get you right, shortened/tilted to spec🙌 shoot me a DM on IG @logan_lamb11
My guy 🤝 I’ll reach out lol it’ll be on my ladies ig but I’ll mention I commented on here
What brand arms did he use
All the boxes said Godspeed, they are all Godspeed arms
would these fit on a 2001 ls430?
I believe so, gs300/400/430/460 should be the same if made in same years I believe. Probably just check forums furst
@@OCTANEANDZIPTIES okay thank you !!
Speedy boys
need to get it straight piped
Godspeed to the whole car 💀💀💀
Yes, what’s wrong with that?
@@OCTANEANDZIPTIES not the most quality brand as far as the ball joints theyre known to blow out, a homie lost his car cause his rear toe arm broke getting onto a highway sent him into a wall at 45. Godspeed toe arms and camber arms 🤷🏼♂️
Had the Q50/Q60 that sent into the wall? I know him as well. Also depends on which generation ball joints, the old ones had to have washers on the top so the ball joints didn’t pop out, the newer ones don’t. Believe me I understand difference in qualities, but nothing wrong with these.
@@OCTANEANDZIPTIES it wasnt a q50 but yes i did hear about that it was on a homie from jerseys subaru wagon. It wasnt even low or static but yea im not hating on your work g you do good stuff. Just dont trust godspeed
So I can put it on my gs 300
I’m backkkkkkk!!!!!!!!!!!!
I like those real rims. Where you bought it.
Dawn soap needa sponsor
I’m sayin😩
yessirskii
Yeeeeee
idk how but godspeed got my shit to -11 rear LMAOOO looks like my car
-11 with the rear upper and all rear lowers? Keep in mind we took off the rear upper locking nuts for more camber adjustability
@@OCTANEANDZIPTIES only the rear uppers!
Oh word!
As an owner of a 430 thank u for this 😍💦🔥
Ahaha of course! There will be more 😎
Everything Slammed like it should be!
🤟
The wss 😭😭
Shits tough
🍞🍞🍞🍞🍞🍞
In a day like nun
LMFAO BAGGED 😮😅
Haha who’s bagged?
@@OCTANEANDZIPTIES the gs430!
Hahah no sir, static. Sorry if the joke went right over my head, I never know with YT comments🤣
how big are the lips?
6 rear 5 front
@@OCTANEANDZIPTIES since you were using the fronts in the rears so they were 5 inch lips?
Yes but today we actually put the tears back on with a small slip on so the barrel didn’t hit the coilover and they fit without rubbing. The 5in lips fit with ease
Too low scraping
I got a gs300
Oh nice!
😬😬
Yum yum
*DEAR PEOPLE WITH SANE MINDS...THIS IS COMPLETE GARBAGE AND A WASTE OF MONEY, AND VERY UNCOMFORTABLE RIDE!!!!!!!!!*
It’s actually really comfortable, not only the seats but the overall ride especially being pretty low is amazing!
@@OCTANEANDZIPTIES I soak from experience. I'm 41, I did all this in like 2003 with a GS300. That camber kit is uncomfortable and terrible overall for tire usage, gas milage, and body frame. But have fun...
The camber kit is uncomfortable? Camber kits don’t differ in ride comfort lol, it’s all adjustable arms. If you’re talking about the coil over spring rate, it’s actually pretty nice. Not too soft but not stiff, especially tucking you don’t need high spring rates. Camber and height (in this sense being low) has nothing to do with gas mileage. Tires are a part of stance and we understand they don’t “last as long”. Body and Frame is completely fine, if you go back and look at some of my videos, I have made my own frames and reinforcement to go lower the correct way. Hope I answered each part of your remark👍 sad a 41 year old man would comment negatively under someone video because you personally don’t like it. Some people just never grow up I guess, have a good one 🙌
Ewwww
No you
Rear strech is so unnecessary lol but she looks rad
Vithy boys type beat