2l Cylinder Head Installation (MP9 Conversion)- VW MK1 BUILD
Вставка
- Опубліковано 27 вер 2024
- today we install the cylinder head, cycle oil through the block and I also show you how to check your timing
if you do go on to enjoy this video don't forget to leave a like and subscribe for more Fox Content
LM Manuel
#vwmk1 #vw #vwfox
First comment gang🔥🔥🔥
Absolute legend bru
Questions:where can I get the new pipes for the radiator. 2)the torque sequence,is it the same for every fuel injection conversion??
The pipes are from goldwagen and the torque sequence is the same for all 8v heads, everything from your 1.3 carbs to 2.0 injection heads
man, where are U from. I have a Citi golf 1.8 Carb; I want to upgrade or convert to a fuel injection. or maybe install a weber Carb but I need pple like u to help me and give me some advice.
Hi guys do you have to take off the cambeltcover on the mk 1 96 model
I saw you were carb at first and then went fuel injection using the 2L head , can you use a 1.8 head that was carb and mount the fuel injection intake and injectors also?
There is a plate that you have to use to convert the carb head to injection. Or possibly drill into it where the injectors need to be placed. It is a lot riskier to do due this you could possibly damage the carb head if done wrong
I have a question
ilike your content but yoou take long to upload
Appreciate it, I know I also don't like how I take but we only work on the car on a Sunday so I only have enough footage for that one upload a week. Hopefully we will increase that
Awe bru my city golf 1.4i 2006 model ifound oil on my coolant reservoir but its idlind farely normal theres no misfire and i found no water on sump when i pulled the dip stick....is it possible that my Head gasket is gone or i should just flush my Coolant and see if its continues?
Check your oil cooler, if that's fine check your gasket. Hows your heat gauge when driving?
respect to you and your daddy ..i love your content
Really do appreciate it
Great work.. Hope your next video get you over a 1000 subs
Thank you and I really do hope so too
Great Content as Always.
I think a good plan of action would be to do a proper wire tuck and relocate the battery to the boot, but this doesn't need to be the #1 objective on your list. This can be a plan for the future. Just take your time with this.
I was thinking about this after I saw shane do it with the yt. If this ever happens it will be once I decided to go full showcar. For now I just want a reliable daily😂
question, what type of head you use for the carburated to fuel injection convertion?, it is a bolt in solution or do it need some important mods?
The head you can use any injection head (1.4, 1.6, 1.8 and 2.0) the head is a straight bolt on but there are a few things you have to change to make the injection system work
like what specifically