Ok hear me out… Step 1. Get sponsored by Clash Step 2. Make a creator series mold called the “Banana”👀 Not that this is set up perfectly, but it’s set up perfectly🤷🏽♂️😂
It would be super cool if you launched your own discs! Having grown up in Colorado its a blast to see you play local courses. I love supporting Colorado "companies"!
It’s gonna be in the future for him, with how much everyone loves bodanza it’s gonna be huge once he gets his first elite series win on the pro tour. Yeah that’s a bit down the road but I see bodanza being a Simon like figure in the community once he’s a seasoned tour pro
The other telltale for recognizing an MVP-made disc is the triple sprue marks on the underside. One larger central one under the dimple, but also 2 fainter ones closer to the rim. To my knowledge, anything they make have those (mvp, axiom, streamline, remix, and even your TSA Pathfinders should have them too)
Bro, with all these glow discs, you could.... do a glow round with a few folks just for kicks, set up some lights on the baskets, those new MVP glow rims and glow centers are pretty bright!!
A problem with deep lovely discs are that they push out shallow discs! Keep filling up with putters and mids, after a short while they are replaced with not needed high speed discs again and again! xD
You have to try out the ev-7 Penrose as a putting putter … I made the switch mid season last year from something similar to the pure and it made a major improvement. At first I ignored it b/c of the microbead but now I love it and love the results.the plastics they have are phenomenal in feel for putting
Your tourney videos do well, but they’re hard to film. Content idea: travel to local minis, sign up for MPO and film! That way it’s low stress, get tons of tournament pressure practice, but also nothing that’s gonna influence your PDGA ratings and will make filming more comfortable! Barsby just moved to my town in Longview TX and plays in our minis, made me think of this idea for you. Keep it up🤙🏼
Does anyone know if Discmania is going to make a P-line PD ever again? I thinking no, and if they do it's going to be slightly different than the Innova molded ones🤷. Hope I'm wrong 🤞🙏.
Been seeing a few mini-reviews on the Petra already. Sounds more Mustang than Pathfinder - little more dome probably pulling up the PLH slightly enough to give it that “2” fade.
@@bananafrolf they’re very very close. I’ve got the full spread of plastics on the Pathfinder and a handful of Mustangs in everything but Eternal. The Mustangs I have just turn less/fade harder. Same with the lone Addax Reborn I’ve got. Could still be the same mold for sure, but possibly different runs.
Since MVP makes multiple molds when prototyping, I have a feeling that molds like the Pathfinder, Petra, and Mustang are all different molds but from the same prototyping of a disc (in this case I believe I heard it was the Reactor). So essentially they make a few molds until they find exactly what they're going for and then they offer the other molds to other brands to recoup the cost of making the mold. The Remix stuff I believe is all factory 2nds and probably can be all of the above so would vary slightly depending on which factory 2nd mold it's from. This is all just my assumption though, it's also possible they're just running off the same mold.
@@SpencerDunnison I like this idea and have speculated the same. Having loved the different variations of the Mana/Lobster, I was thrilled about the Detour when it was announced because I saw it as kind of a “final form” of all those other brands’ models I liked. Now that I’ve thrown one, I think it is!
I feel like disc companies making “the same disc” is inevitable just like musicians gravitating toward the more popular chord progressions. There is that one 4 chords progression that is in like a thousand songs. Discs that try new plastic blends, new aesthetics, different methods to achieve the same flight numbers, and open up a whole world of different artists designing stamps and dyes. There are only so many good flight number patterns. If we all just let one company do it, that’s a monopoly and that would be very bad.
There is some inconsistency in many different companies and molds, but I do have some reliables that are so close I can throw a new disc with pretty decent accuracy.
![UNBOXING MY ALLOTMENT [Discs I NEED For DDO + New TS Disc?!?]](/img/n.gif)
Ok hear me out…
Step 1. Get sponsored by Clash
Step 2. Make a creator series mold called the “Banana”👀
Not that this is set up perfectly, but it’s set up perfectly🤷🏽♂️😂
@clashdiscs this one right here ☝
It would be super cool if you launched your own discs! Having grown up in Colorado its a blast to see you play local courses. I love supporting Colorado "companies"!
It’s gonna be in the future for him, with how much everyone loves bodanza it’s gonna be huge once he gets his first elite series win on the pro tour. Yeah that’s a bit down the road but I see bodanza being a Simon like figure in the community once he’s a seasoned tour pro
A glow Tākapu is one of my favorite throwing putters!
My boy is really pumping out the videos lately! 🙌
The other telltale for recognizing an MVP-made disc is the triple sprue marks on the underside. One larger central one under the dimple, but also 2 fainter ones closer to the rim. To my knowledge, anything they make have those (mvp, axiom, streamline, remix, and even your TSA Pathfinders should have them too)
I have noticed that on every mvp made disc
Bro, with all these glow discs, you could.... do a glow round with a few folks just for kicks, set up some lights on the baskets, those new MVP glow rims and glow centers are pretty bright!!
A problem with deep lovely discs are that they push out shallow discs! Keep filling up with putters and mids, after a short while they are replaced with not needed high speed discs again and again! xD
The way you run both channels daily is crazily impressive. Keep it up man! Your gonna be huge homie!
thanks!! Just enjoying the ride!!
Yeet Street is fairly local to me. Great store and great guys.
It's the burst variant of the Proton plastic, they don't have a separate trade name for it.
Hatless bodanza looks like he's gonna bake me the dopest pizzas I've ever had in my life while explaining his theory of general relativity.
Techdisc with the sticker joke for the win.
You have to try out the ev-7 Penrose as a putting putter … I made the switch mid season last year from something similar to the pure and it made a major improvement.
At first I ignored it b/c of the microbead but now I love it and love the results.the plastics they have are phenomenal in feel for putting
Your tourney videos do well, but they’re hard to film. Content idea: travel to local minis, sign up for MPO and film! That way it’s low stress, get tons of tournament pressure practice, but also nothing that’s gonna influence your PDGA ratings and will make filming more comfortable!
Barsby just moved to my town in Longview TX and plays in our minis, made me think of this idea for you. Keep it up🤙🏼
def would love to do more of that!
You're going to love that Skywalker. It is probably Discmania's best drop of the year.
You should definitely try the rainmaker I’ve trying it this week and I normally use pures
I found the flex-1 to be a bit shallower than the flex-3. It’s a bit more comfortable for me personally.
Love this video!
Does anyone know if Discmania is going to make a P-line PD ever again?
I thinking no, and if they do it's going to be slightly different than the Innova molded ones🤷.
Hope I'm wrong 🤞🙏.
hopefully they run it some point even if it's just a fun run!
Been seeing a few mini-reviews on the Petra already. Sounds more Mustang than Pathfinder - little more dome probably pulling up the PLH slightly enough to give it that “2” fade.
I'm pretty sure mustang is also pathfinder
@@bananafrolf they’re very very close. I’ve got the full spread of plastics on the Pathfinder and a handful of Mustangs in everything but Eternal. The Mustangs I have just turn less/fade harder. Same with the lone Addax Reborn I’ve got. Could still be the same mold for sure, but possibly different runs.
Since MVP makes multiple molds when prototyping, I have a feeling that molds like the Pathfinder, Petra, and Mustang are all different molds but from the same prototyping of a disc (in this case I believe I heard it was the Reactor). So essentially they make a few molds until they find exactly what they're going for and then they offer the other molds to other brands to recoup the cost of making the mold. The Remix stuff I believe is all factory 2nds and probably can be all of the above so would vary slightly depending on which factory 2nd mold it's from. This is all just my assumption though, it's also possible they're just running off the same mold.
@@SpencerDunnison I like this idea and have speculated the same. Having loved the different variations of the Mana/Lobster, I was thrilled about the Detour when it was announced because I saw it as kind of a “final form” of all those other brands’ models I liked. Now that I’ve thrown one, I think it is!
Thoughtspace wouldnt have prism plasma cause prism is the rim with proton and plasma would be the core.
because you mentioned it: yeet street disc has trash panda dune's and esp malta's for under 10 bucks apiece right now. just bought some to dye.
What are you looking for in a putter besides OS? Just curious!
slightly shallow, not crazy os, just more than a pure, I prefer beadless, and grippy plastic that's also semi firm
So with that may Discs Do you give any of them away?
Heck yeah bonanza video
Would be sick if you leased off MVP. Would love to design a stamp for you if you do.
You got your DAWGS on video, for FREE????
I feel like disc companies making “the same disc” is inevitable just like musicians gravitating toward the more popular chord progressions. There is that one 4 chords progression that is in like a thousand songs.
Discs that try new plastic blends, new aesthetics, different methods to achieve the same flight numbers, and open up a whole world of different artists designing stamps and dyes. There are only so many good flight number patterns. If we all just let one company do it, that’s a monopoly and that would be very bad.
100%
They can't even make the same disc that they produced two years ago, so 😅
There is some inconsistency in many different companies and molds, but I do have some reliables that are so close I can throw a new disc with pretty decent accuracy.
How do I get an R2 Glitch, I need it bad bad.
eBay. That’s where a lot of these discs end up from the mystery box exclusives
Throw a round every month with two brands worst selling discs.
cool moves by Techdisc.
im looking at your crave and just dying inside because i lost mine in the snow in the first throw🥲