Yes please more triple content 👏 I've also got a 24 carni red street and there's not a whole lot of us on UA-cam yet. So good on ya for at least posting this video! Thank you!
Once you have the 6 pin connector are you able to turn off the wrench icon that appears for oil changes? I have a 2024 model, and i'm not sure what to do for a tune once I install exhaust. Is there any tunes available for it yet? Great looking bike!
To my knowledge you need to get a an OBD Link MX+ and attach that to the adaptor for the euro 5 to OBD2 and turn the service light off that way. I got the dealer service last year but this year I’ll have to do the same.
Sc should bolt up but the headers may also need another bracket similar to the one I mentioned in the video. I’d love to see how yours sounds. Wanted to do that one but the wait time was killing me.
@@NJRabbleRousers that’s where I’m at. Most likely going to do it over winter. Most likely will be shipping my bike to BT Moto also to get a tune too. They haven’t perfected the new 765. I’ll be out some money shipping but hopefully they’ll get these new bikes tuned to perfection.
@@NJRabbleRousersI bought the Spark Grid-O from Moto-D, they sent me the 2024+ mounting kit. They will send you the brackets for the 24+, I also removed my db killer. It’s much louder with little benefit but I like it.
I just bought the same fill system for my Moto2. Rapid Bike told me the module will not work on '24 street triples. How did you get it to work on your '24? Can I run this system with a stock tune or will it be to lean. Im waiting for Tube ECU to properly tune the bike.
I called the rapid bike store in Orlando and they told me that the device will not work in my bike, The website list is only up to 2023, obviously is working for you. Why do you think they say it won’t work for the 2024 model?
Does the full system sc project sc1r of 2022 model(previous model) will fit the new model properly? I am thinking of ordering a high mounted one(mounted to pillion foot peg)
Honestly I am not sure but this is technically the 2022 model Spark exhaust and I got it to fit. I will do a detailed video on my other channel shortly about how I got it to fit
Is the rapid bike tuner module waterproof? Would it malfunction in case the bike is out in the rain? Every time I wash my bike, i noticed that a lot of water seeps inside the storage under the pillion seat and I’m just worried this might affect the electrical components.
To my knowledge it is water proof and that’s odd you get a lot of water under there I typically do not get a lot of water in there when I wash my bike. Do you use a pressure washer?
@@MayZe. that is possible does it have entry holes to the under seat? What tail tidy? I have the one from MotoDynamics and theirs doesn’t let any water in as there is a rubber seal.
One more question: Would you recommend Rapidbike tuner over Power commander? On the Dynojet website, I can only see that it’s compatible with 2024 Street Triple R and not RS, and it looks like it comes with 2 set of stock maps I guess, correct me if I’m wrong. The stock tune of the R is lesser than RS, so im a little confused as to whether i should go with PC6 + auto tune module or go with rapid bike? What’s your experience with Rapidbike tuner and is the auto tune module extra with Rapidbike tuner as well? There’s not a lot of content on tuning the new 2024 765RS on UA-cam, so I was hoping you could shed some light on what I need to exactly do if I’m getting a full system exhaust. PS: I have the new 2024 Spark full system on order.
@@NJRabbleRousers it’s on their website. It shows a picture of a sonic yellow 2024 RS that looks like it’s a perfect fit. No retrofitting brackets and the bracket under the bike seems to line up
@@NJRabbleRousers noooo, not the one on the bottom. I believe that’s gonna be a slipon. Click on the top picture, the full system, and scroll through the pictures. Their’s a few pictures with really good detail. Reach out, tell me what you think. The brackets look like they can be added to your current setup.
@@NJRabbleRousershello, mind if ask you about the rapid bike. What’s all those cables in the tail. Also, regarding the obdII port. Do you plug the rapid bike into it? Did you have the bike dyno’d. I understand the auto adaptation feature for the 2023/2024 os turned off, why you have to set up on a dyno. Not really overwhelming, just limited information about installation of the rapid bike module
Hii i just go the full system exhaust...do i really need to have the free flow air filter and ecu remapped, what happens if it stays in stock for ecu and air filter?
@@akhilesh605 you don’t need to have the ECU tuned but the computer is going to think it’s all stock so your aftermarket parts won’t add any performance and may actually reduce performance due to different airflow.
do you know what diameter pipe it is. I see I can purchase just the headers from spark. I wonder if I can connect my current slip on, different brand to it. From what I’ve researched the difference in gains from the different exhausts out there is very marginal.
@@NJRabbleRousers perfect! Thanks brotha! I was looking to buy the sc projects headers but that thing is $1,300 vs the spark headers at $699.99. Crazy!
@@NJRabbleRousers one more question. With the rapid bike tuner can you turn off the default riding mode. I like keeping my bike on track mode but I have to set it every time I turn on the bike. I have the 2018 rs.
@@cantwheelie_rob yeah I had the SC on order but they were taking way too long. I will say, I wish I waited for the SC headers cause their titanium blues way better than Spark.
@@NJRabbleRousers I would get the sc projects headers if I didn’t want to do other things to my bike.and I would’ve loved to get the sc projects full system but it’s so damn loud even with the baffle in with the s1 or cr-t can. I wouldn’t be able to take long rides with that kind of noise.
![Triumph Street Triple RS Dyno Day Exhaust Shootout [SC Project, LeoVince, Spark]](http://i.ytimg.com/vi/vP-WCyvjSJ8/mqdefault.jpg)
Yo that sparks exhaust sounds TUFF !!!!🤙🏼🤘🏻🤙🏼🤘🏻
Please I would love to see more content on the 2024 Street Triple!!! I am in California and I have a yellow one
me too, when did you get yours
Yes please more triple content 👏 I've also got a 24 carni red street and there's not a whole lot of us on UA-cam yet. So good on ya for at least posting this video! Thank you!
Thanks man, curious where do you live?
Where have you boys been?! When I last commented, I only had a single handgun, now I have an armory lmao glad you guys are doing well!
Is there any news on a full tuner? Or does the rapid tuner work the same way for dyno tune?
Did you noticed any improvement with the tuner assembled? I've just ordered the same exhaust for my 23 765rs
Nothing as of yet but honestly haven’t had much seat time to nice just yet.
Once you have the 6 pin connector are you able to turn off the wrench icon that appears for oil changes? I have a 2024 model, and i'm not sure what to do for a tune once I install exhaust. Is there any tunes available for it yet? Great looking bike!
To my knowledge you need to get a an OBD Link MX+ and attach that to the adaptor for the euro 5 to OBD2 and turn the service light off that way. I got the dealer service last year but this year I’ll have to do the same.
I’ve got the same bike. Looking to do an exhaust. SC Project has a full exhaust kit that I’m curious about.
Sc should bolt up but the headers may also need another bracket similar to the one I mentioned in the video. I’d love to see how yours sounds. Wanted to do that one but the wait time was killing me.
@@NJRabbleRousers that’s where I’m at. Most likely going to do it over winter. Most likely will be shipping my bike to BT Moto also to get a tune too. They haven’t perfected the new 765. I’ll be out some money shipping but hopefully they’ll get these new bikes tuned to perfection.
@@RadDadisRad keep me posted I’d be interested to hear how it all works out
@@NJRabbleRousersI bought the Spark Grid-O from Moto-D, they sent me the 2024+ mounting kit. They will send you the brackets for the 24+, I also removed my db killer. It’s much louder with little benefit but I like it.
Hi I’ve just fitted this to my RS 2023 have you had to have yours remapped ?
I just bought the same fill system for my Moto2. Rapid Bike told me the module will not work on '24 street triples. How did you get it to work on your '24? Can I run this system with a stock tune or will it be to lean. Im waiting for Tube ECU to properly tune the bike.
More content. I’m looking at buying one very soon
How is it 2024 when it's launched & available in 2023 ?? It's 2023 Triumph Street Triple.
where are you located in NJ? Can I get the exhaust installed by you?
Would you say a tune is needed if I went and put a full no cat exhaust on my r? Same year.
Can tou do a video of the rapid bike install?
Sounds awesome!!!
Keep up the videos!
Can you please measure the sound level in decibel at 5k rpm? I am looking at the same setup but I want to comply with the track sound limit.
Let me see if I can get a decibel reader and try that absolutely.
Did you notice any performance gain after installing the rapid bike tune?
I didn’t have the bike long enough without the tuner to be able to tell but it’s something I plan to test in 2024.
I called the rapid bike store in Orlando and they told me that the device will not work in my bike, The website list is only up to 2023, obviously is working for you. Why do you think they say it won’t work for the 2024 model?
@@Rocket3R odd. I called them also but maybe because of the adapter needed for the OBD port.
@Rocket3R they told me the same. Tune ECU needs to crack the ecu soon.
Does the full system sc project sc1r of 2022 model(previous model) will fit the new model properly? I am thinking of ordering a high mounted one(mounted to pillion foot peg)
Honestly I am not sure but this is technically the 2022 model Spark exhaust and I got it to fit. I will do a detailed video on my other channel shortly about how I got it to fit
Is the rapid bike tuner module waterproof? Would it malfunction in case the bike is out in the rain?
Every time I wash my bike, i noticed that a lot of water seeps inside the storage under the pillion seat and I’m just worried this might affect the electrical components.
To my knowledge it is water proof and that’s odd you get a lot of water under there I typically do not get a lot of water in there when I wash my bike. Do you use a pressure washer?
@@NJRabbleRousers I have got an aftermarket tail tidy. Could that be the reason it’s letting in so much water? Is there a simple fix?
@@MayZe. that is possible does it have entry holes to the under seat? What tail tidy? I have the one from MotoDynamics and theirs doesn’t let any water in as there is a rubber seal.
That is correct. I’ve just ordered the motodynamic tail tidy, that should fix it.
One more question: Would you recommend Rapidbike tuner over Power commander?
On the Dynojet website, I can only see that it’s compatible with 2024 Street Triple R and not RS, and it looks like it comes with 2 set of stock maps I guess, correct me if I’m wrong. The stock tune of the R is lesser than RS, so im a little confused as to whether i should go with PC6 + auto tune module or go with rapid bike? What’s your experience with Rapidbike tuner and is the auto tune module extra with Rapidbike tuner as well? There’s not a lot of content on tuning the new 2024 765RS on UA-cam, so I was hoping you could shed some light on what I need to exactly do if I’m getting a full system exhaust. PS: I have the new 2024 Spark full system on order.
Hello, I understand spark has the proper brackets for this year model (2024)
Where did you see that?
@@NJRabbleRousers it’s on their website. It shows a picture of a sonic yellow 2024 RS that looks like it’s a perfect fit. No retrofitting brackets and the bracket under the bike seems to line up
@@ridepastu1418 from what I can tell it says coming soon for me so I don’t think it is out yet.
@@NJRabbleRousers noooo, not the one on the bottom. I believe that’s gonna be a slipon. Click on the top picture, the full system, and scroll through the pictures. Their’s a few pictures with really good detail.
Reach out, tell me what you think. The brackets look like they can be added to your current setup.
@@NJRabbleRousershello, mind if ask you about the rapid bike. What’s all those cables in the tail. Also, regarding the obdII port. Do you plug the rapid bike into it? Did you have the bike dyno’d. I understand the auto adaptation feature for the 2023/2024 os turned off, why you have to set up on a dyno. Not really overwhelming, just limited information about installation of the rapid bike module
You needed retuning?
Hii i just go the full system exhaust...do i really need to have the free flow air filter and ecu remapped, what happens if it stays in stock for ecu and air filter?
@@akhilesh605 you don’t need to have the ECU tuned but the computer is going to think it’s all stock so your aftermarket parts won’t add any performance and may actually reduce performance due to different airflow.
@@NJRabbleRousers so does it effect the engine life? what do you think about the free flow air filter?
@@akhilesh605 it shouldn’t effect engine life but I cannot say for sure. Free flow air filter same thing
Can you make a fly By with this?
Sure!
Does that have the baffle in it?
Where you guys been?!
I am going to do a channel update video soon.
Hi, does the ob2 device comes with the stock bike?
No you have to buy it separately
@@NJRabbleRousers thanks bro
do you know what diameter pipe it is. I see I can purchase just the headers from spark. I wonder if I can connect my current slip on, different brand to it. From what I’ve researched the difference in gains from the different exhausts out there is very marginal.
I don’t know off hand but it is the same diameter as the stock headers
@@NJRabbleRousers perfect! Thanks brotha! I was looking to buy the sc projects headers but that thing is $1,300 vs the spark headers at $699.99. Crazy!
@@NJRabbleRousers one more question. With the rapid bike tuner can you turn off the default riding mode. I like keeping my bike on track mode but I have to set it every time I turn on the bike. I have the 2018 rs.
@@cantwheelie_rob yeah I had the SC on order but they were taking way too long. I will say, I wish I waited for the SC headers cause their titanium blues way better than Spark.
@@NJRabbleRousers I would get the sc projects headers if I didn’t want to do other things to my bike.and I would’ve loved to get the sc projects full system but it’s so damn loud even with the baffle in with the s1 or cr-t can. I wouldn’t be able to take long rides with that kind of noise.
What tail tidy and rear light did you install?
MotoDynamics
How did you get it? I can't find in the Spark official website (I'm Italian)
I got it through Moto D (US based company).
Spark.it is their official website I’m sure you can contact them there.
@@NJRabbleRousers yeah sure I am Italian but I only find exhaust for Street triple 2021 2022… in Italy maybe the 2023 version is still not released
@@AyumazHD weird. I think this one is meant for a 22+ but like I said in the video it doesn’t quite fit the 2024 100% correctly but it does work
@@AyumazHD There is no 2023 Spark exhaust, yet. Unless you get a full system then you can use the old 2020-22 versions.
I can kinda understand the hyperbole but nope, not a patch on the Cp3 engine, any guise
Not following?
Whats your top speed?
need more videos
Link?
I've had 2 complaints by people that my exhaust is "too loud". Including YOU.
It IS
IT IS NOT. You installed it for me so......@@NJRabbleRousers
So you can't buy a 2022 full exhaust and fit it into the 2024 model huh
You can but it won’t fit exactly the same
Can you install my exhaust for me? And my mirrors? 😘😘😘😘
I’ll think about it…
How long do you need to think for? @@NJRabbleRousers
@@Dhjohnyringo eternity
FINE!!! I'll have someone else install it then@@NJRabbleRousers
It’s a 2023***. We aren’t from “Back to the Future” as Fred would say
Listen, nobody asked your opinion.
Oh wow….an I didn’t ask for you to respond……Bullyyyy. Go shoot some rounds or something
like he said in North America they are 2024 year model !
@@NJRabbleRousers Your wish of dislike has been granted 🤡
OK Karen!
do you have the low seat on as well?
Yup!