In this video,you will learn how to install ,connect and set up the network in the mode of repeater.We demonstrated the proper way to install the WN572HG3 Outdoor AP in detail and give other advice for you so as to improve your networking experience. If you think this video was made well and helpful to you, you might as well encourage us by clicking a like at the bottom of the video, or share it to let more people know. And we also hope to see you leave some of your views here.
@@Agungsugiartono Hello, WN572HG3 has a Gigabit WAN/LAN composite port and a 100M LAN port. The composite port supports POE power supply and can be used as both a WAN port and a LAN port, so the LAN port naturally has no need to support POE power supply anymore. The extra LAN port is mainly for the terminal to use for wired Internet or continue to relay other routers. If you have any questions or suggestion, please follow us and feel free to contact us at any time.
I am using this unit to receive a WiFi signal in a campground and then re transmit the WiFi at my camp site. Many extenders cut the bandwidth in half when you do this. With the Wavelink Wing 12M you can set the 2.4Ghz side to listen for the camp ground signal and then rebroadcast it on the 5Ghz radio. This does not cut the speed in half.
Decent video. Use the pause function to make sure the setup is going in the right direction. Instructions in the box are good, with all the software piracy and data monitoring going on I’m not sure how wavelink stacks up but this extender works well in my rural area.
No, both the connection method and setting method of AP mode and repeater mode are different. We have also made a guide video for AP mode, please check: ua-cam.com/video/rrvpr74n4TQ/v-deo.html If you have any questions or suggestion, please subscribe to us and feel free to contact us at any time.
Hahaha, thank you for your support to wavlink, it is our honor to get your affirmation. We will continue to optimize products and services based on your feedback. If you have any questions or suggestion, please follow us and feel free to contact us at any time.
@@WavlinkOfficial for outdoor AP, maybe u can upgrade your antenna dbi look at totolink a011. it 11 dbi antenna. recently i bought it for replace wavlink ac600 antenna. if in the future wavlink already with high gain antenna. it will be good 👍
@@wifindoreview5158 Okay, thank you for your suggestion, we will feed it back to the R&D department. The reason why we have not made the gain value of outdoor AP too high is mainly considering that although the larger the gain value of the antenna, the longer the coverage distance to a certain extent, but its signal coverage will not be so uniform，and the corresponding coverage will be reduced accordingly. Our current AP are mainly used for omnidirectional coverage. In order to ensure the user experience, we chose a relatively intermediate 7DBi, so that it is not easy to have the situation where the signal can be received but the network cannot be used.
@@WavlinkOfficial yes u correct but for my opinion, most of outdoor AP is for coverage wide area. which not high building so if this AP has built-in 11dbi antena and i put it in public place like yard or we market. it will cover more line of sight area. coz that places must be dont need vertical coverage 👍
@@wifindoreview5158 Okay, please continue to follow us. If there are new products available, we will publish them on social media such as youtube, facebook, twitter, and upload them to the official website of Wavlink.
Instalei uma AC1200 em cima do meu Motor Home. Como eu faço a configuração para buscar sinal externo para dentro dele? Além dessa antena, instalei um roteador dentro do Motor Home para distribuir sinal interno
I am currently working my wavlinkac600 as repeater also my first time to do this, by following you tube instructions. I find it hard i cant connect this to my wifi😢help
I'm getting somewhat worse signal than my asus ac1900 router , how do I fix this , the way I'm conecting is from modem Lan cable to poe power adaptor provided then with the same adaptor it has a power out and use it in its respective place , I was hopping that this whould be better if not close to my old router in place 9f where I put the old router but the signal is a bit more diminished any help whould be appreciated in advance 😇😊😊😇 👍👌👌👍
Why the less than 10ft height from the ground? I am trying to use 2 of these to tie two buildings 400ft apart. Was going to mount them on the roofs. The ground is not flat so the 10ft limit will not have clear line of sight. Do I need to return these and get something else?
Hola, podria captar señal de mi familiar a 95 metros aprox. Hay algunos obstaculos por lo q no se si logre llegarme su señal, en la consola xbox y tv llega apenas 1 barra pero no me entrega internet puesto que esta lejos, este producto podria servirme?😊
About WN572HP3:【AC1200 High Power Performance Upgraded Version for Long Range WiFi Extender Outdoor】- The next generation of WiFi, complies with IEEE 802 11 ac/a/b/g/n standards, Dual-Band maximum speed up to 5GHz 867Mbps + 2.4GHz 300Mbps, it is an upgraded version of triple chips compared with WN572HG3 dual chips MTK 7620A+7612E, in 4 x 7dBi Detachable Omni Directional Antennas.
You will have proof using this model in the video with this model Access Point, Wifi Repeater, Wisp, Outdoor Router Wavlink Model: MKD-570HP2-FULL? I would like to know the distances using the two devices at the same time and if they are compatible, and how is the internet signal?
This extender works great, but it is public. Anybody could use it. I cannot go to the website to change the security feature and add a password. Can you help me on this?
Sure, our outdoor AP has router, repeater, and AP modes. However, compared with ordinary household router, outdoor AP antennas have much larger gain value and rf power, stronger wall penetration and coverage, and multiple protection designs such as rain protection, lightning protection and sun protection, as well as POE power supply support, so it is more suitable for outdoor use. Therefore, if it is used in large family houses, we still suggest that it is more appropriate and cost-effective to buy our Mesh router for networking. The mesh networking scheme can achieve seamless roaming and non-destructive transmission.
Hello, we have tested this outdoor AP before, and the linear coverage of the wireless signal is roughly 500 meters. Of course, this is not absolute. The wireless signal is susceptible to various obstacles and interferences, and it depends on the specific environment. If you want to extend the wireless network to 900 meters, it is recommended to buy two outdoor APs. If you have any questions, please follow us and feel free to contact us at any time.
Hello, it is generally not recommended to change the beacon interval, just follow the default or recommended settings. The default is usually 100ms. Of course, if the network environment is not very good, then you need to set a larger value. It is recommended to change it to 500ms to see if the network is improved. The beacon is a periodic signal sent by the router. After the wireless network card scans the beacon, it will find the corresponding router and display it. If the beacon interval is lowered, frequent transmission of beacons will occupy wireless bandwidth resources. It is not good for connected wifi users, and it will also affect the network speed. If it is increased, it will be slower for newly connected users to scan the wireless SSID, so you need to make a compromise based on the actual situation. If you have any questions or suggestion, please follow us and feel free to contact us at any time.
Hello, this is also possible, our products can be set up on the PC side or on the mobile side. After connecting the outdoor AP according to the above steps, connect the WIFI with "wavlink" in the SSID with iphone, then open the browser, enter the gateway address "192.168.10.1" in the address bar of the browser, and then enter the initial Password "admin", log in to the setting interface, and then follow the same steps in the video to set up the network. If you have any questions, please follow us and feel free to contact us at any time.
Hey "Wavelink Official"....if you are going to make an informational tutorial, at least be considerate about people trying to keep up with your speedy video. I think most of us prefer narration to silent QUICK DRAW videos. You need to watch some "HOW TO" videos on making a decent video!
Okay, thank you for your valuable suggestions. We will strive to improve and explain it with dubbing in future guide videos. If you have any questions or suggestion, please subscribe to us and feel free to contact us at any time.
At first I was thinking what a well made video this was. It was the right speed well, very well edit and visually it was well shot. But then you went to the computer screen shots and it was a total let down. The pace went too fast I could not see what you were clicking on and it was not that informative. People that watch these how to videos are not techies or they would not need your videos. They are regular people that take their phone to the equipment and try to use pause and watch a little screen. Anyways, the first part of your video was one of the best how to videos I've ever seen and the last parts were one of the worse. The only reason I'm commenting is because we need more good how to videos and you have potential to be one of the best. Good luck
Okay, thank you for your recognition of us, and thank you for your suggestions to improve the quality of our videos. We will reflect this improvement in future videos, and strive to provide you with more valuable good how to videos. If you have any questions or suggestion, please follow us and feel free to contact us at any time.
Hello, this may be the cause of excessive network interference. It is recommended to eliminate these influencing factors first. Then after powering on WN572HG3, it is recommended to wait patiently for around one minute to see if the wireless network with the SSID "WAVLINK-N" can be received normally, or you can search for this SSID directly. After trying several times, if it still doesn't work, then you need to reset WN572HG3. After resetting, the problem should be solved. If you have any questions or suggestion, please follow us and feel free to contact us at any time.
I have a doubt how to get the maximum speed from the device "AC1200 Dual-Band High-Power Outdoor". On the RJ 45 cable that goes to the device I get 362Mbps but when I connect this cable to the AC1200 device the WIFI gives me only 100Mbps (being next to the device). If I move away 50 meters the speed drops to less than 10Mbps. How can I get 300Mbps using Wifi over a distance of 50 meters outdoors (without barriers)? Thanks
Hello,It is recommended to consult our after-sales customer service about the question. Please contact by email: For after-sales support: contact@wavlink.com Or contact via facebook: Facebook (For Tech Support & After-sales): facebook.com/WavlinkTechS... If you have any questions, please follow us and feel free to contact us at any time.
Wie soll die Antenne im 5GHz Modus 867 MBit/s schaffen obwohl das ganze Gerät nur mit maximal 100 MBit/s erkannt wird? Das ist im Video ab 5:27 min zu sehen und ist bei mir auch so. Die Reichweite ist wirklich super, aber die Geschwindigkeit von max 100 MBit/s ist traurig.
Hallo, du hast es falsch verstanden. Das 5: 27-Segment zeigt die Geschwindigkeit an, wenn der Computer über das Netzwerkkabel mit dem WN572HG3 verbunden ist, nicht die Geschwindigkeit der WiFi-Verbindung. Der WN572HG3 verfügt über einen Gigabit-WAN-Port und einen 100-M-LAN-Port. Die Funktionen von 5 GHz und 2,4 GHz spiegeln sich bei der Verbindung mit WLAN wider. Wenn das Gerät über ein Netzwerkkabel mit dem WN572HG3 verbunden ist, beträgt die Geschwindigkeit daher nur 100 MBit / s. Wenn es jedoch mit WLAN verbunden ist, kann es bei 5 GHz die Geschwindigkeit von 867 MBit / s erreichen. Darüber hinaus wird WN572HG3 als Outdoor-AP verwendet. Daher wird am häufigsten eine Verbindung zu seinem WLAN hergestellt, anstatt eine Verbindung mit einem Netzwerkkabel herzustellen. Daher ist WN572HG3 angesichts der großen Abdeckung und der hohen Geschwindigkeit kein Problem. Wenn Sie Fragen oder Anregungen haben, abonnieren Sie uns bitte und nehmen Sie jederzeit Kontakt mit uns auf.
@@WavlinkOfficial ich habe meine Antenne am WAN angeschlossen, dann kommt die Poe Dose und dann an meinem Router ( Fritz Box 7590). In der Fritzbox wird die Antenne nur mit 100mbit erkannt. Hätte ich gewusst das die Antenne so langsam ist hätte ich mir noch einen zweiten Fritz Repeater 2400 gekauft.
@@stefansasse1761 Hallo, wenn Sie eine höhere Geschwindigkeit wünschen, empfiehlt es sich, in Ihrer Router-Fritzbox in den Repeater / WISP / Wireless-Bridge-Modus zu wechseln und dann eine Verbindung zum WN572HG3 über WLAN statt über ein Netzwerkkabel herzustellen. Es kann das von dir genannte Problem lösen.
Great help but ..WAay too fast!!! I have already stopped the vid over 20 times to see what was going on...so this will take me close to 30 minutes instead of 5 😂😂
It is our honor to be able to help you. As for the speed issue, it is recommended to slow down the playback speed in the settings below the video when watching, then it should be much better. If you have any questions or suggestion, please follow us and feel free to contact us at any time.
L'antenna da spenta, parte, fa autotest, lampeggia lan, poi wan e wifi...poi si accende wifi e tutti i led del segnale ma non si accende ne wan ne lan E collegandolo al pc non "cerca" la lan.....in wifi, nonostante indichi che e' pieno segnale, non esce "wavlink" (che dovrebbe uscire perche ho fatto reset, sia 10secondi sia di 20 secondi) Da buttare?
Ciao, se le luci della porta WAN e della porta LAN non sono accese, potresti avere un problema con il cablaggio. È necessario verificare se il cavo di rete è collegato correttamente o se il cavo di rete è danneggiato e confermare che la banda larga è corretta. Inoltre, se non è possibile trovare il WiFi con l'SSID di "wavlink", si consiglia di escludere se l'interferenza di rete nelle vicinanze è troppo grande, quindi ripristinare il WN572HG3 e riavviarlo, attendere uno o due minuti, quindi aggiornare il terminale. Rete wireless per vedere se appare. Se il problema non può ancora essere risolto, si consiglia di contattare il nostro servizio clienti post-vendita. Si prega di contattare via e-mail: Per il supporto post-vendita: contact@wavlink.com Oppure contatta tramite facebook: Facebook (per supporto tecnico e post-vendita): facebook.com/WavlinkTechS ... In caso di domande, seguici e non esitare a contattarci in qualsiasi momento.
Do you mean setting the network speed of networked devices through QOS function? You can log in to router gateway address, enter the setting interface, and set it in it.
And I also just want to thank Amazon for sending me this piece of s*** without instructions I've been trying to download a manual for almost 72 hours Can't even find one on their stupid website because I guess it's not this year's model
I have two Wavlink unit and will not buy anything again from them. With the customer service I received I cannot recommend their products and will not purchase any more of their products again. I would find another company and stay away from Wavlink.
I have a problem with the wavlink wifi Repeater AC 1200, when I want to turn it on, 2 blue LEDs from the power turn on and off, the power LED and the signal LED, i.e. LED 1 and LED 6, and the green LED from the poe converter also lights up it also turns off. the above mentioned LEDs turn on and off at the same time. I tried to reset it but it doesn't reset... if you could help me... thank you
In this video,you will learn how to install ,connect and set up the network in the mode of repeater.We demonstrated the proper way to install the WN572HG3 Outdoor AP in detail and give other advice for you so as to improve your networking experience.
If you think this video was made well and helpful to you, you might as well encourage us by clicking a like at the bottom of the video, or share it to let more people know.
And we also hope to see you leave some of your views here.
LAN SUPPORT POE IN?...
@@Agungsugiartono Hello, WN572HG3 has a Gigabit WAN/LAN composite port and a 100M LAN port. The composite port supports POE power supply and can be used as both a WAN port and a LAN port, so the LAN port naturally has no need to support POE power supply anymore. The extra LAN port is mainly for the terminal to use for wired Internet or continue to relay other routers.
If you have any questions or suggestion, please follow us and feel free to contact us at any time.
I am using this unit to receive a WiFi signal in a campground and then re transmit the WiFi at my camp site. Many extenders cut the bandwidth in half when you do this. With the Wavelink Wing 12M you can set the 2.4Ghz side to listen for the camp ground signal and then rebroadcast it on the 5Ghz radio. This does not cut the speed in half.
Decent video. Use the pause function to make sure the setup is going in the right direction. Instructions in the box are good, with all the software piracy and data monitoring going on I’m not sure how wavelink stacks up but this extender works well in my rural area.
Funciona em uma distancia de quantos metros por favor?
How far can it Go?
How many Wi-Fi can I configure on the equipment?
Do you have bandwidth control?
Should I connect it like in this video if I want to use it as an access point?
No, both the connection method and setting method of AP mode and repeater mode are different.
We have also made a guide video for AP mode, please check:
ua-cam.com/video/rrvpr74n4TQ/v-deo.html
If you have any questions or suggestion, please subscribe to us and feel free to contact us at any time.
Superb video. A non technical friend was able to setup the device without issue. Thank you!
Amigo como activo el filtrado Mac o lista de acceso para clientes en ese equipo por favor le agradezco la ayuda
i love wavlink design, spec and price
this is 1 of the most affordable product with high specs compare other products
Hahaha, thank you for your support to wavlink, it is our honor to get your affirmation.
We will continue to optimize products and services based on your feedback.
If you have any questions or suggestion, please follow us and feel free to contact us at any time.
@@WavlinkOfficial for outdoor AP, maybe u can upgrade your antenna dbi
look at totolink a011. it 11 dbi antenna. recently i bought it for replace wavlink ac600 antenna. if in the future wavlink already with high gain antenna. it will be good 👍
@@wifindoreview5158 Okay, thank you for your suggestion, we will feed it back to the R&D department.
The reason why we have not made the gain value of outdoor AP too high is mainly considering that although the larger the gain value of the antenna, the longer the coverage distance to a certain extent, but its signal coverage will not be so uniform，and the corresponding coverage will be reduced accordingly.
Our current AP are mainly used for omnidirectional coverage. In order to ensure the user experience, we chose a relatively intermediate 7DBi, so that it is not easy to have the situation where the signal can be received but the network cannot be used.
@@WavlinkOfficial yes u correct
but for my opinion, most of outdoor AP is for coverage wide area. which not high building
so if this AP has built-in 11dbi antena and i put it in public place like yard or we market. it will cover more line of sight area. coz that places must be dont need vertical coverage 👍
@@wifindoreview5158 Okay, please continue to follow us. If there are new products available, we will publish them on social media such as youtube, facebook, twitter, and upload them to the official website of Wavlink.
Hello,..I have a question, when I turn it on, the green light from "POE CONVERTER" blinks and does not work......Thank you
Does it keep the same SSID name also ?
Is there a tutorial for mac?
Sorry how difference distance from ac600 and ac1200
Instalei uma AC1200 em cima do meu Motor Home. Como eu faço a configuração para buscar sinal externo para dentro dele? Além dessa antena, instalei um roteador dentro do Motor Home para distribuir sinal interno
I am currently working my wavlinkac600 as repeater also my first time to do this, by following you tube instructions. I find it hard i cant connect this to my wifi😢help
I'm getting somewhat worse signal than my asus ac1900 router , how do I fix this , the way I'm conecting is from modem Lan cable to poe power adaptor provided then with the same adaptor it has a power out and use it in its respective place , I was hopping that this whould be better if not close to my old router in place 9f where I put the old router but the signal is a bit more diminished any help whould be appreciated in advance 😇😊😊😇 👍👌👌👍
I wanted to install this on my second floor. why is this not possible? any way around this?
ช่วยฉันด้วย ฉันใช้ wavlink WN572HG3 wing 12M outdoor ใน AP mode ใช้งาน 1 สัปดาห์แรก ปกติทุกอย่าง หลังจากนั้น ip camera และอุปกรณ์อื่นๆที่ใช้คลื่น 2.4GHz ไม่สามารถล็อกอินเข้าใช้อินเตอร์เน็ตได้ แต่ 5GHz สามารถใช้งานได้ปกติ มีอาการเหมือนกันแบบนี้ 2 เครื่องแล้ว โปรดช่วยฉันด้วย
When I go the setup wizard I only have one option Router, it doesn’t give me the other choices Lan Bridges(AP) or Wifi Repeater, what did I do wrong?
How can I set this up wirelessly (without CAT5e Ethernet to a desktop but by iPhone)
Why the less than 10ft height from the ground? I am trying to use 2 of these to tie two buildings 400ft apart. Was going to mount them on the roofs. The ground is not flat so the 10ft limit will not have clear line of sight. Do I need to return these and get something else?
What did you end up doing, Mr. Mitchell, as I'm in the same boat.
Hola, podria captar señal de mi familiar a 95 metros aprox. Hay algunos obstaculos por lo q no se si logre llegarme su señal, en la consola xbox y tv llega apenas 1 barra pero no me entrega internet puesto que esta lejos, este producto podria servirme?😊
can i use a differant WIFI password instead of the main password that connests to main host
Hi, I am having issues in setting my wavlink 1200 as repeater
Puedo conectarle cables lan de categoría 8/9?????? Ho debe ser de cat 5/6?????
I would prefer a power supply that didn't require the POe to plugged to an indoor outlet.
can i block the user connection on router mode??
What is the difference between the WN572HG3 and the WN572HP3
About WN572HP3:【AC1200 High Power Performance Upgraded Version for Long Range WiFi Extender Outdoor】- The next generation of WiFi, complies with IEEE 802 11 ac/a/b/g/n standards, Dual-Band maximum speed up to 5GHz 867Mbps + 2.4GHz 300Mbps, it is an upgraded version of triple chips compared with WN572HG3 dual chips MTK 7620A+7612E, in 4 x 7dBi Detachable Omni Directional Antennas.
Their website says the HP3 version id Mesh capable.
You will have proof using this model in the video with this model Access Point, Wifi Repeater, Wisp, Outdoor Router Wavlink Model: MKD-570HP2-FULL?
I would like to know the distances using the two devices at the same time and if they are compatible, and how is the internet signal?
can this run on 12v DC without the need for poe?is the wall charger output 12v?
This extender works great, but it is public. Anybody could use it. I cannot go to the website to change the security feature and add a password. Can you help me on this?
How many concurent user can connect?
Does it work as indoor extender.....I mean in big house with many rooms
Sure, our outdoor AP has router, repeater, and AP modes.
However, compared with ordinary household router, outdoor AP antennas have much larger gain value and rf power, stronger wall penetration and coverage, and multiple protection designs such as rain protection, lightning protection and sun protection, as well as POE power supply support, so it is more suitable for outdoor use.
Therefore, if it is used in large family houses, we still suggest that it is more appropriate and cost-effective to buy our Mesh router for networking. The mesh networking scheme can achieve seamless roaming and non-destructive transmission.
It can extend wifi signal upto 900 meters ??
Hello, we have tested this outdoor AP before, and the linear coverage of the wireless signal is roughly 500 meters.
Of course, this is not absolute. The wireless signal is susceptible to various obstacles and interferences, and it depends on the specific environment.
If you want to extend the wireless network to 900 meters, it is recommended to buy two outdoor APs.
If you have any questions, please follow us and feel free to contact us at any time.
Very helpful vedio
What does the beacon interval (ms) dow 20 -999 what shub I put in the beacon interval
Hello, it is generally not recommended to change the beacon interval, just follow the default or recommended settings. The default is usually 100ms. Of course, if the network environment is not very good, then you need to set a larger value. It is recommended to change it to 500ms to see if the network is improved.
The beacon is a periodic signal sent by the router. After the wireless network card scans the beacon, it will find the corresponding router and display it. If the beacon interval is lowered, frequent transmission of beacons will occupy wireless bandwidth resources. It is not good for connected wifi users, and it will also affect the network speed. If it is increased, it will be slower for newly connected users to scan the wireless SSID, so you need to make a compromise based on the actual situation.
If you have any questions or suggestion, please follow us and feel free to contact us at any time.
if i want instal in my iphone
Hello, this is also possible, our products can be set up on the PC side or on the mobile side.
After connecting the outdoor AP according to the above steps, connect the WIFI with "wavlink" in the SSID with iphone, then open the browser, enter the gateway address "192.168.10.1" in the address bar of the browser, and then enter the initial Password "admin", log in to the setting interface, and then follow the same steps in the video to set up the network.
If you have any questions, please follow us and feel free to contact us at any time.
Hey "Wavelink Official"....if you are going to make an informational tutorial, at least be considerate about people trying to keep up with your speedy video. I think most of us prefer narration to silent QUICK DRAW videos. You need to watch some "HOW TO" videos on making a decent video!
Okay, thank you for your valuable suggestions. We will strive to improve and explain it with dubbing in future guide videos.
If you have any questions or suggestion, please subscribe to us and feel free to contact us at any time.
At first I was thinking what a well made video this was. It was the right speed well, very well edit and visually it was well shot. But then you went to the computer screen shots and it was a total let down. The pace went too fast I could not see what you were clicking on and it was not that informative. People that watch these how to videos are not techies or they would not need your videos. They are regular people that take their phone to the equipment and try to use pause and watch a little screen. Anyways, the first part of your video was one of the best how to videos I've ever seen and the last parts were one of the worse. The only reason I'm commenting is because we need more good how to videos and you have potential to be one of the best. Good luck
Okay, thank you for your recognition of us, and thank you for your suggestions to improve the quality of our videos. We will reflect this improvement in future videos, and strive to provide you with more valuable good how to videos.
If you have any questions or suggestion, please follow us and feel free to contact us at any time.
I can’t connect to the management page it’s say validation expired
Hello may you use EEPROM Flash CH341 Reading Membership and Coppy Give me the ROM file of the WAVLINK AC600 is not. Wire to receive feedback
Hello anybody here could answer my concern. Im having trouble connecting this to my wifi. Though im done in the process of it as repeater
wavlink outdoor ac1200 "WAVLINK-N not showing" in wifi connections.
Hello, this may be the cause of excessive network interference. It is recommended to eliminate these influencing factors first.
Then after powering on WN572HG3, it is recommended to wait patiently for around one minute to see if the wireless network with the SSID "WAVLINK-N" can be received normally, or you can search for this SSID directly.
After trying several times, if it still doesn't work, then you need to reset WN572HG3. After resetting, the problem should be solved.
If you have any questions or suggestion, please follow us and feel free to contact us at any time.
I have a doubt how to get the maximum speed from the device "AC1200 Dual-Band High-Power Outdoor".
On the RJ 45 cable that goes to the device I get 362Mbps but when I connect this cable to the AC1200 device the WIFI gives me only 100Mbps (being next to the device). If I move away 50 meters the speed drops to less than 10Mbps.
How can I get 300Mbps using Wifi over a distance of 50 meters outdoors (without barriers)?
Thanks
So I'm assuming if I only own a $1000 tablet and a $1300 cell phone I can't do this without a $100 laptop computer
That’s exactly what I thought 😅
How to get rid of wavlink WN572HG3 Outdoor AP auto reset problem
Hello,It is recommended to consult our after-sales customer service about the question.
Please contact by email:
For after-sales support: contact@wavlink.com
Or contact via facebook:
Facebook (For Tech Support & After-sales): facebook.com/WavlinkTechS...
If you have any questions, please follow us and feel free to contact us at any time.
@@WavlinkOfficial thanks
A quantos metros de casa consigo o sinal de wi-fi?
Agradecimentos para sua atenção.
Nosso AP externo AC2100 Aerial HD4 pode cobrir totalmente a faixa de 328-1640 pés com rede sem fio.
Wie soll die Antenne im 5GHz Modus 867 MBit/s schaffen obwohl das ganze Gerät nur mit maximal 100 MBit/s erkannt wird? Das ist im Video ab 5:27 min zu sehen und ist bei mir auch so. Die Reichweite ist wirklich super, aber die Geschwindigkeit von max 100 MBit/s ist traurig.
Hallo, du hast es falsch verstanden. Das 5: 27-Segment zeigt die Geschwindigkeit an, wenn der Computer über das Netzwerkkabel mit dem WN572HG3 verbunden ist, nicht die Geschwindigkeit der WiFi-Verbindung.
Der WN572HG3 verfügt über einen Gigabit-WAN-Port und einen 100-M-LAN-Port. Die Funktionen von 5 GHz und 2,4 GHz spiegeln sich bei der Verbindung mit WLAN wider. Wenn das Gerät über ein Netzwerkkabel mit dem WN572HG3 verbunden ist, beträgt die Geschwindigkeit daher nur 100 MBit / s. Wenn es jedoch mit WLAN verbunden ist, kann es bei 5 GHz die Geschwindigkeit von 867 MBit / s erreichen.
Darüber hinaus wird WN572HG3 als Outdoor-AP verwendet. Daher wird am häufigsten eine Verbindung zu seinem WLAN hergestellt, anstatt eine Verbindung mit einem Netzwerkkabel herzustellen. Daher ist WN572HG3 angesichts der großen Abdeckung und der hohen Geschwindigkeit kein Problem.
Wenn Sie Fragen oder Anregungen haben, abonnieren Sie uns bitte und nehmen Sie jederzeit Kontakt mit uns auf.
@@WavlinkOfficial ich habe meine Antenne am WAN angeschlossen, dann kommt die Poe Dose und dann an meinem Router ( Fritz Box 7590). In der Fritzbox wird die Antenne nur mit 100mbit erkannt. Hätte ich gewusst das die Antenne so langsam ist hätte ich mir noch einen zweiten Fritz Repeater 2400 gekauft.
@@stefansasse1761 Hallo, wenn Sie eine höhere Geschwindigkeit wünschen, empfiehlt es sich, in Ihrer Router-Fritzbox in den Repeater / WISP / Wireless-Bridge-Modus zu wechseln und dann eine Verbindung zum WN572HG3 über WLAN statt über ein Netzwerkkabel herzustellen. Es kann das von dir genannte Problem lösen.
Great help but ..WAay too fast!!! I have already stopped the vid over 20 times to see what was going on...so this will take me close to 30 minutes instead of 5 😂😂
It is our honor to be able to help you. As for the speed issue, it is recommended to slow down the playback speed in the settings below the video when watching, then it should be much better.
If you have any questions or suggestion, please follow us and feel free to contact us at any time.
L'antenna da spenta, parte, fa autotest, lampeggia lan, poi wan e wifi...poi si accende wifi e tutti i led del segnale ma non si accende ne wan ne lan
E collegandolo al pc non "cerca" la lan.....in wifi, nonostante indichi che e' pieno segnale, non esce "wavlink" (che dovrebbe uscire perche ho fatto reset, sia 10secondi sia di 20 secondi)
Da buttare?
Ciao, se le luci della porta WAN e della porta LAN non sono accese, potresti avere un problema con il cablaggio. È necessario verificare se il cavo di rete è collegato correttamente o se il cavo di rete è danneggiato e confermare che la banda larga è corretta.
Inoltre, se non è possibile trovare il WiFi con l'SSID di "wavlink", si consiglia di escludere se l'interferenza di rete nelle vicinanze è troppo grande, quindi ripristinare il WN572HG3 e riavviarlo, attendere uno o due minuti, quindi aggiornare il terminale. Rete wireless per vedere se appare.
Se il problema non può ancora essere risolto, si consiglia di contattare il nostro servizio clienti post-vendita.
Si prega di contattare via e-mail:
Per il supporto post-vendita: contact@wavlink.com
Oppure contatta tramite facebook:
Facebook (per supporto tecnico e post-vendita): facebook.com/WavlinkTechS ...
In caso di domande, seguici e non esitare a contattarci in qualsiasi momento.
is really get 1200m
How to block and unblock wavlink rouder...plz akta video den
Do you mean setting the network speed of networked devices through QOS function?
You can log in to router gateway address, enter the setting interface, and set it in it.
Give data limit and user block in device manager
of course MAG Filtering is required
schit protouct
And I also just want to thank Amazon for sending me this piece of s*** without instructions I've been trying to download a manual for almost 72 hours Can't even find one on their stupid website because I guess it's not this year's model
All music, NO explanation!!!
I have two Wavlink unit and will not buy anything again from them. With the customer service I received I cannot recommend their products and will not purchase any more of their products again. I would find another company and stay away from Wavlink.
Hindi maliwanag ang tutorial mo uwi kana lng brow..nakakalito
Worst.Device.ever! I would never again buy wavlink. Included POE injector was the lowest possible quality.
Horrible video
too much speedy !!!!!!!!!
I have a problem with the wavlink wifi Repeater AC 1200, when I want to turn it on, 2 blue LEDs from the power turn on and off, the power LED and the signal LED, i.e. LED 1 and LED 6, and the green LED from the poe converter also lights up it also turns off. the above mentioned LEDs turn on and off at the same time. I tried to reset it but it doesn't reset... if you could help me... thank you