Minn Kota Terrova Installation on a Tracker Pro Guide V-16 WT | Complete How-To Guide
Вставка
- Опубліковано 1 жов 2024
- In this video I install a Minn Kota Terrova GPS I-Pilot Bow-Mount Trolling Motor on the 2024 Tracker Pro Guide V-16 WT boat and remove the stock trolling motor. I go through the step-by-step method of removing the front panels, removing the old trolling motor, mounting the new trolling more and wiring everything up.
Join the community on Discord: / discord
Follow us on Instagram: @MVBOutdoors
/ mvboutdoors
---Product Links*------
Solder Seal Wire Connectors
- amzn.to/3zknOGj
Minn Kota Terrova Bow-Mount Trolling Motor
- amzn.to/3TEKWaD
Variable Temp Heat Gun
- amzn.to/3zgd4cb
---Related Videos------
LED Trailer Light Install
-- • CHEAP & EASY BOAT TRAI...
TROLLING MOTOR TRANSOM MOUNT
-- • TROLLING MOTOR TRANSOM...
1648 Jon Boat Build Full Playlist
-- • 1648 Jon Boat To Bass ...
*Orders through the Amazon affiliate links above provide us with a small referral commission at no cost to you. Using affiliate links in no way affects our opinions expressed on this channel and merely serve as a method to help this channel grow while still providing useful, relevant information. ------------
#jonboat #boating #fishing
Used in this video:
Minn Kota Terrova Bow-Mount Trolling Motor
- amzn.to/3TEKWaD
Wire Strippers
-amzn.to/4cQBri7
Solder Seal Wire Connectors
- amzn.to/3zknOGj
Variable Temp Heat Gun
- amzn.to/3zgd4cb
Great video just picked up a V16 and your videos help take the guesswork out of accessing the guts of the boat!!
***New Sub Here*** Your how to remove the bench seat vid saved my life...Had to weld up a hole in my Jon boat!! I'm cheap..so DIY is in my DNA...to my detriment sometimes!!
How do you get the depth the work on the remote ??
Today I mounted the minn kota heading sensor exactly as you did...love the cup holder idea!!! worked perfect.
I just read something that says it should be 2 ft from the trolling motor tho? Has yours worked properly? anchor working good?
I haven't had any issues with it, I've done it close on my last boat too without issues.
You could have just bought the spot lock upgrade kit for 400$.
You get more than just spot lock with the Terrova, the launch/retrieval assist is so much nicer on the Terrova.
Hey man I messaged you on your instagram account! Love all the how too vids
What do you think about roller bucks versus wood bunks ? I got a rivit 1752 Jon boat I just got. Came with roller bunks. I feel like they put to much pressure on all those points versus bunks take it even. Would it dent hull ?
I've never wanted rollers for the same reason, I figured it would wear the bottom in some way. Are they hard plastic rollers? Bunks have always worked well for me.
@@mvboutdoors I went with my gut and replaced them with 10 foot 2x4 bunks. It’s a 1751 boat. You think those support the hull well ? Or should I take them back off and do 2x6 ones.
@@coltensawyer6761 2x4's should be fine its how most bunks are
How do you get the depth to work on the remote . Mine doesn’t read ?
I wasn't aware the Terrovas could read depth? Does your have the built-in transducer?
I would assume that it does .. on my first trip out with the new rig the hand held remote showed the depth .. the next trip out it was off . I can’t seem to find the information to get it back on
That is one very beautiful boat. I need to get something similar in future.
I was curious why didn’t you move up to the 24volt model? I am looking at putting a 24 ulterra on mine and also moving the battery closer to the drivers side so that way there is more space. What are your thoughts on it otherwise I love my 16wt that’s 2021
Honestly the 55lb moves the boat just fine and that way I didn't have to change up any of the wiring or additional batteries.
The nav light is obstructed by the trolling motor. Water patrol won’t be happy 😢
@@jeffjones4006 that's true, it's actually how it comes from the factory but the nav light itself has a socket for a nav light pole so it's all good.