Sir jab bhi hum rcc column ke bat karte h to hum dekhte h ye dono taraph fix hote kya eske alawa bhi enki koi position hoti h Or eski unsupported length kaise nikalte h
Hello sir Sir aap ek video soil bearing capacity par banaeye detail me like kaise check karte hai site par kon sa method apply karte hai generally kon methi use karte hai kon so soil ki sbc kya hai please plzzzzzz
Bottom bhi ho sakta hain aur top bhi. Normally bottom me hota hain but jaha water table ka baat ata hain waha pe top pe dete hain, buoyant force ko resist karne ke liye
Sir auto level ko site pr kese use krre ek point de dusre point pr jb shift hota he th back side and fore side kya hoga and kese vo level transfer hga... I have faced this problem on site
can you make a video on marking column using grid lines on site? how to mark starter using grid lines i read some articles and watched some videos but i am stilll not 100% clear if you can draw it on your board and explain it then also it would be helpful thanks
Bhai sirf civil engineering wale hi nahi dekhte ye sab kuch educated contractor bhi dekhte hai ..much educated home owners builders and kuch meri tarah jo personally interest rakhta hai engineering me even though humara business and trade ka kaam hai ...
Sir aapse request hai ki ek video es topic pe baniye... Ek plan hai 15000 square feet ,,Usme brick work ho rha Usme bhaut Sara windows hai and door hai but ek thumb rule batiye ki Usme kitna brick lagega ... 15000 area me 12 flat es plan me hai ..... Please espe ek thumb rule batiye bhaiya
Sir, ek old house with bricks pillars wala, uppar niltonbeam and roofbeam hai and concrete roof uske upar hai, yeh house ko bina break or destroy kiye kaise concrete ka piller banaya ja sakta hai taki 3 floor house banaya ja sake? Old house hai isliye ghar ke side main space bhi kam hai - North & west side 1'5" space south side another room hai with concept pillars 10/10" but only east side main 3 to 4 feet space hai. Yeh ek challenge type work hai kaise kare samajh nehi araha hai mistry toh bol dega ke ho jayega but sehi se ho isliye apko likha, please sirf like maat dena answer bhi dena please 🙏
1. For SDC concrete vibrator is required? 2. 20mm vibrator is there?where it should b used? 3. For waterproofing chemical in concrete which one is preferred? Fosroc? 4. Can we add waterproofing chemical in the vehicle directly after batching? What happens if so...? 5. What is the difference btwn corewall, Shearwall? 6.can we use 40mm also as shearkey? 7. Extra supports for acro spans,and bracings can be removed next day of slab casting? 8. For acro props 10mm pin can also used? 9. What is 3legged stiruup?how it looks? 10. Length of chair leg depends on? How it is calculated?
Sir I need 75 m³ concrete. But i don't want to use rmc. So i need estimate for cement bags, fine & corse aggregate... I need a lecture on this topic. If you make a vedio on this topic, I will be very thankful to you.
75m3(dry volume) add 54%to get wet volume (116m3).if it is m20 grade concrete that is 1:1.5:3. Cement required is 608 bags(21.10m3*1440(density of cement)),31.65 m3 of sand,63.30m3 of coarse aggregate
SIR, I am waiting for my B.Tech results and my query is if we don't put pin bar in between a first and second layer of bottom reinforcement then the section goes over reinforced, is it correct or else, please explain us by uploading video .regards.
Sir auto level se level transfer karne k liye proper tarika bataiye Jaise ki fgl se kb up aur down jana hota h jaise plinth beam ka level rb ka level jaise bilkul sur se pratical kr k sir plz
sir ji can u tell me how to place the hook of stripus in column. can we place all hook in one direction or it should be placed diagonally opposite or we have to place the hook in clock wise / anti clock wise direction what it the correct method as per code
✔ Watch all videos of Interview: bit.ly/2tT1rJx
RMC plant pe video banaiye.
@@HarshitSharma-ew5zl Ok brother.
Perfect teaching.....it is very simple.....
Keep watching
Bs itna hi kafi hai. Thank u
you welcome brother
Aap bht accha smjhate hai sir❤️🙏
Super Explanation, very clear ❤️
OK. Very nice . Thank you.
Aap sir aise hi vedio banate raho
Aadhe se zyada to apne bna diye engg...
Bahut accha laga video, girder reinforcement ka video banayi please
Thank you so much sir .
You are very great sir
Thank you Sir 🙏
Thanks a lot of you sir
And thanku sir apke all vedios k liye
Thanks😊😊
Naice information sar
Sir jab bhi hum rcc column ke bat karte h to hum dekhte h ye dono taraph fix hote kya eske alawa bhi enki koi position hoti h
Or eski unsupported length kaise nikalte h
V nice😍😍😍😍
Thank ❣️❣️❣️❣️❣️❣️❣️❣️❣️❣️❣️❣️❣️❣️
u welcome brother
Good information sir
Thanks brother
Nice one sir
Are sir m10 grade concrete me kese pta lage ki sad kitna cement kitna please sir reply
Sir
Make a video on bbs of slab beam and column on site.......plz
Already made BBS on this topic. You can check video of BBS playlist - bit.ly/2EnYdiS
Is lapping in compression zone and in tension zone same
Hello sir
Sir aap ek video soil bearing capacity par banaeye detail me like kaise check karte hai site par kon sa method apply karte hai generally kon methi use karte hai kon so soil ki sbc kya hai please plzzzzzz
Ok
Yes sir kindly make a video about it
Yes sir
I am also agry pls do something Sir as soon as possible.
Very nice sir..
Thank you sir
Nic vidio sir 👌👌👌👌
Thanks 😊
You welcome
Hi
I like your videos
Need to know the consumption of cement ,brick bat at terrace waterproofing
ok brother. I will make a video on it
Good explanation for site engineers
Sir beam me top me jayada bar use hota hai ya bottom me
Bottom
Bottom bhi ho sakta hain aur top bhi. Normally bottom me hota hain but jaha water table ka baat ata hain waha pe top pe dete hain, buoyant force ko resist karne ke liye
bro can u provide sotfcopy excel of variation order.valuation.rate analysis n estimation costing
Thnx sir.
u welcome
Thank you....
You welcome brother
Please share about RCC lntake Well
It was helpful
Thankyou sir
u welcome
Can u tell me how to mark column starter .?
In case of 4legged, which type is better.. mastee ring wala or 2 same ring.
Thanks
you welcome brother
Please upload bbs for 3 pile cap.
ok brother. Mail me your drawing at civilengineeringofficial@gmail.com
Nice
Thank you
good practical conceptual knowledge sir👌
Give information about column lineout
ok brother
Hook length of single leg stirrup for 135 deg bend??
10d
@@LearningCivilTechnology thank you sir
Sir stair case bar bending schedule
Ka vedio bna finite
Sir auto level ko site pr kese use krre ek point de dusre point pr jb shift hota he th back side and fore side kya hoga and kese vo level transfer hga... I have faced this problem on site
Thanks🙏Sir
can you make a video on marking column using grid lines on site?
how to mark starter using grid lines
i read some articles and watched some videos but i am stilll not 100% clear
if you can draw it on your board and explain it
then also it would be helpful
thanks
Sir please tell me how to convert to volume of sand and aggregate from weight in the field of mix design and general store purpose.
By knowing the exact density of sand and aggregate, which are used at the site.
@@lakshmankn3372 Thanks brother for guiding Mr. Abdul
Sir
Give information about bbs of different types of footing
Ok brother. Check This Video Playlist of BBS - bit.ly/2EnYdiS
Sir beam me lapping konse area me dete ahe
Toe wall and reataining wall practically kaise use karen
i will make a video on it
Sir rcc drawing study kaisa kare usake bareme bataye
Ok
Sir it depends onbars please tell sir
Bhai sirf civil engineering wale hi nahi dekhte ye sab kuch educated contractor bhi dekhte hai ..much educated home owners builders and kuch meri tarah jo personally interest rakhta hai engineering me even though humara business and trade ka kaam hai ...
Sir M35 ke above quantity calculation pe video banaiye.
Ok brother. I will make a video on it. Thanks
Thanks ok brother's
Hello mukesh bro good job this eng akram from dubai
Thanks brother
can we arrange 3 bar top reinforcement and 2 reinforcement bottom of required steel area what is drawback if we provide less no of bar at bottom
Thanks sir
you welcome
What is difference between 1legged stirrups and links in reinforcement binding
Sir m ab b study krra hu apke Chanel ke through
That's great brother. Sun ke acha laga.
How to calculate crancbar in beam
Thanku sir❤️
Yeh sab cheze clg main nahi hoti h
How can decide fresh structure designer types of foundation selection for economical & safety
sir please make video of crack in walls and rcc
Can u told me which beam fall on first primary beam or second beam
Primary ke upar secondary rest karta hain
Sir aapse request hai ki ek video es topic pe baniye...
Ek plan hai 15000 square feet ,,Usme brick work ho rha Usme bhaut Sara windows hai and door hai but ek thumb rule batiye ki Usme kitna brick lagega ... 15000 area me 12 flat es plan me hai ..... Please espe ek thumb rule batiye bhaiya
ok brother. I will make a video on it.
7th floor and 14 th floor building construction how to find basement fotting depth?
By design analysis
Very nice
Sir plz vacancy k bare m v btaiye
make video on setting out building and foundation marking
Sir branch aur leg dono yek hi hai . please bataye
Nicely explained. What if two legged stirrups intersect with each other. One in x direction and the other stirrup in y direction.
Schedule of rates k bare btaiye
Ok
Requirment Tiles,marbal granite , fiting all knowledge cement consumption , expenditure like that please ispe video banav estimating of tile......
Ok brother. I will make a video on it. Thanks
Sir ek doubt tha high grade of concrete kon hai aur woo Kaya Kam me ata hai
Nice Sir
Thank you brother
Sir, many state govt royalty on usage of minerals fees is in volume basis? Then how to convert sand, aggregate from weight to volume to pay royalty??
By knowing the density of sand and aggregate of particular quarry
@@lakshmankn3372 density of sand is verying 1530 to 1650 kg/cum. Client is saying to take higher range.. who will decide it??
@@bhumasreekanthareddy7844 if you take higher range,then volume will be less and it is vice versa
Acha explanation
Sir pls defined for the cutting length for L shape
Sir, ek old house with bricks pillars wala, uppar niltonbeam and roofbeam hai and concrete roof uske upar hai, yeh house ko bina break or destroy kiye kaise concrete ka piller banaya ja sakta hai taki 3 floor house banaya ja sake? Old house hai isliye ghar ke side main space bhi kam hai - North & west side 1'5" space south side another room hai with concept pillars 10/10" but only east side main 3 to 4 feet space hai. Yeh ek challenge type work hai kaise kare samajh nehi araha hai mistry toh bol dega ke ho jayega but sehi se ho isliye apko likha, please sirf like maat dena answer bhi dena please 🙏
amazing bro 😍😍🔥
Sir thanks for your information... I need standard books 📚 as will helpfull in construction works.
Good
1. For SDC concrete vibrator is required?
2. 20mm vibrator is there?where it should b used?
3. For waterproofing chemical in concrete which one is preferred? Fosroc?
4. Can we add waterproofing chemical in the vehicle directly after batching? What happens if so...?
5. What is the difference btwn corewall, Shearwall?
6.can we use 40mm also as shearkey?
7. Extra supports for acro spans,and bracings can be removed next day of slab casting?
8. For acro props 10mm pin can also used?
9. What is 3legged stiruup?how it looks?
10. Length of chair leg depends on? How it is calculated?
Ok brother. I will make a video on it. Thanks
Plz. Explain in detail about aelf compaction concrete( including slump test). And quick settlement concrete and which location will use?
Ok brother. I will make a video on it. Thanks
Sir DBM mix design ki video bana digiye
Sir, basically the longest side of cross-section of any stirrup is called leg. Am I right? Please clarify.
Sir I need 75 m³ concrete. But i don't want to use rmc. So i need estimate for cement bags, fine & corse aggregate... I need a lecture on this topic. If you make a vedio on this topic, I will be very thankful to you.
75m3(dry volume) add 54%to get wet volume (116m3).if it is m20 grade concrete that is 1:1.5:3. Cement required is 608 bags(21.10m3*1440(density of cement)),31.65 m3 of sand,63.30m3 of coarse aggregate
Thanks Lakshman brother for guiding Mr. Sagar
SIR, I am waiting for my B.Tech results and my query is if we don't put pin bar in between a first and second layer of bottom reinforcement then the section goes over reinforced, is it correct or else, please explain us by uploading video .regards.
ok
sir why stirrups are ends at compression zone. why not at tension zone?
Sir auto level se level transfer karne k liye proper tarika bataiye Jaise ki fgl se kb up aur down jana hota h jaise plinth beam ka level rb ka level jaise bilkul sur se pratical kr k sir plz
sir ji can u tell me how to place the hook of stripus in column.
can we place all hook in one direction or it should be placed diagonally opposite
or we have to place the hook in clock wise / anti clock wise direction
what it the correct method as per code
Precast connection ka video banao sir
SUBSCRIBED SIR...
Sir ,my question is that why different between PCC and RCC density?
PCC-2400 kg/m^³
RCC-2500 kg/m^³
PCC me reinforcement nahi hta hain... But RCC me hota hain
@@LearningCivilTechnology but sir how can be possible exceed weight in RCC only 100 kg/m^³
Sir possible please make video on this topic. Im very thankful to
Sir this question recently I have faced in our interview.
Auto level main structures excavation ka level laine ka .. bhi video banao sir...
Ok brother
Agar contruction ke baad humara cube fail ho jaye toh kya kre with tecnical term m describe kigiye
Site pe hone vali sabhi " material test" per ek video layiye sir