The greatest fault for projects like this is it have very bad accuracy on it's measure rate! Grab very accurate multimeter and check the Voltage and Current, you will know that the Digital Voltage-Ampere is crap. AND when you deal with Lithium based battery it is disastrous project.
Das dachte ich mir auch. Luftlöcher und ein kleiner Ventilator sind bestimmt nicht verkehrt 🥵 Und wie er eine 6S Batterie mit einem 24V- Netzteil vollständig laden will, muss er mir auch mal vorhüpfen 🤓 bevor ich wieder Beschwerden kriege, weil mich niemand verstehe kann: I thought so too. Air holes and a small fan can be definitely not wrong 🥵 And when he wants to fully charge a 6S battery with a 24V power supply, he has to jump ahead of me 🤓
Bro hats of to your work . Iyou are more exprenced . But i have i dout you use glue gun to stick the smps when you use to charge the battery with higher amp it will heat and remove maybe 😊😊😊😊
I thought so too. Air holes and a small fan can be definitely not wrong 🥵 And how he wants to fully charge a 6S battery with a 24V power supply, that's also an interersting point 🤓
Frankly, this is a disaster. Voltage and current are never accurate with these components and I'm not seeing how any balancing is performed. For Lithium, you are looking to destroy your batteries in the best case scenario.
Really is just power supply, no balancing from the charger, its built into the battery, so the title is misleading. Also didn't see the power supply calibrated for output. Those Cheap meters have to be calibrated before using them (they are always off from factory). Other than that was entertaining.
You need biger case your joint can be easily shorted
Also it need fan for cooling. The buck convertor get very hot in long time charging
Aapka kaam badhiya he /good job👍
Super Projects You Always Do.
Good one 😊 big fan ❤️
Thank you so much 😀
The greatest fault for projects like this is it have very bad accuracy on it's measure rate!
Grab very accurate multimeter and check the Voltage and Current, you will know that the Digital Voltage-Ampere is crap.
AND when you deal with Lithium based battery it is disastrous project.
Step down buck convector me alag se multiturn 10k pot lgate he to usme jo pehle se pot lge he unko htana jruri he kya
Yes
I have all the parts at the store, very close to me, but I have nowhere to find such a box.😅🤦♂️
Anyway, super cool!✌
It's a 4"x6" or 5"x8" electrical switch box... You can get it at any electrical shop....❤❤❤❤❤...
Thanks for posting.
I'm going to have to build a 42V balance charger and modify my E-bike batteries because they don't have a BMS.
Balancing is performed through a BMS board inside the battery pack that is being charged I assume
You know that, in li-ion and li-po packs balance charging is necessary, right?
@@stevenanderson9532 not every bms has a balancer
@@stevenanderson9532 also, my comment was a more of a reminder, if he used bms with built in balancer than good for him
@@stevenanderson9532 not responding is a issue with content creators from India
Schön kompakt. Aber etwas aktive Kühlung wäre vielleicht angebracht.
Das dachte ich mir auch. Luftlöcher und ein kleiner Ventilator sind bestimmt nicht verkehrt 🥵
Und wie er eine 6S Batterie mit einem 24V- Netzteil vollständig laden will, muss er mir auch mal vorhüpfen 🤓
bevor ich wieder Beschwerden kriege, weil mich niemand verstehe kann:
I thought so too. Air holes and a small fan can be definitely not wrong 🥵
And when he wants to fully charge a 6S battery with a 24V power supply, he has to jump ahead of me 🤓
Sailing par lagane ke liye Kon se Smart led stirp Rgb leni chahiye
WS2812
@@easytechzones pata nahi chala
I believe wil be 1s-5s charger from 24v if you don’t have a booster and just a step-down
It should be ok with charging voltage 12.6v and 1,2amps
Nice and very helpful project
Very good design, I like ti so much!
Sir Buckconverter 5 AMP 24 Transformer Me Kaam Karega please reply 🙏🙏🙏
Yes
xl4016
@@easytechzones Thank You Sir
is it balance charging, if not its very dangerous
Fabulous nice one .. 👍👍 ❤️❤️
Thanks
Better if you guide intead of this background music. Dispointing
Ise khud pata nahi hai ye kya ker Raha hai.
I just have adapter 12v 3a sir, can i make powersupply like you sir?
Wow Gajab bro
Can it charge nimh battery?
What do you do potashio miter connection haied?
Bro hats of to your work .
Iyou are more exprenced .
But i have i dout you use glue gun to stick the smps when you use to charge the battery with higher amp it will heat and remove maybe 😊😊😊😊
Nice project
Bro you background green bord name plizzz
God has given me all these things it is timely that i have recognised his gifts and keep them then assemble them.
Thank you for this video 👍🏿👍🏼👍
👏
😉
What are the values of those pots?
Nicevideo bro 👍👍❤️❤️
Dobra robota !
Hii guys can someone please tell me where to get these type of boxes for DIY projects ?
your video is very good
Dovresti spiegarmi come fai a regolare i trimmer avendoli applicati sul retro di due potenziometri, all'apparenza non collegati.
Полезная штука я себе тоже такую сделал на 6 А и 20 В. правда у меня другая конструкция но все же работает уже второй год.
sir what is smps out put volt and amps
Can you make a video for 48 v 13s 10 p battery charger?
Yes
Bro is tarah ka plastic box mujhe kahan se mil sakta hai ?
Bhai es charging module apne banaya eska price kitna he
Can we charge without bms
Can it charge 4s 3.2v lifepo4 battery?
every thing well explaind but you didn't explaind you what to do in pot
ensho variable
Hello! Video class! Super!👍
Good can you sell to and how much?
4s 14.8v bms ka input voltage kitna hota hai bhai...plzz reply
Nice video bro ❤️👍
can i use 12v laptop charger ?
Good work
The project was very good, the problem is that there was no cooling.
I thought so too. Air holes and a small fan can be definitely not wrong 🥵
And how he wants to fully charge a 6S battery with a 24V power supply, that's also an interersting point 🤓
Ese box kha milte h???
Waoooow gooooood 👍👍
Thanks
no balancing circuit?
You need bms to charge
Hello. Thanks for a very good video! Where can I buy the adapter you use?
Adapter is from any laptop charger
Buy old laptop adapter from scrap and try to repair usually the fuse/thermistor/mov is damaged
Nice video, thanks :)
Thanks
You could list the different components to make the Li ion battery charger
Ok
Very useful video
Parabéns Gênio.
Sucesso, sempre!!!
আপনি কোথায় থাকেন? Big fan sir
I want to buy this charger price?
Bro you did a mistake in the knob the blue will be red and red will be blue.
Keep it up.
Thank you, I will
Is it cinema
25volt wala ye adapter me ye def hai solve kaise karein
Please make a arduino lcd voltage current measuring display for power supplys
ok
sir ye mujhe purchase karna hai to mil sakta hai
Frankly, this is a disaster. Voltage and current are never accurate with these components and I'm not seeing how any balancing is performed. For Lithium, you are looking to destroy your batteries in the best case scenario.
Amazing idea #Electronicsorelectronics
Thanks
you box size.?
4*7inch
WHERE I CAN DOWNLOAD TABLE CHARGER ON TOP BOX?
Pause the video 13:49 then make the same model in MS-Office Word after that just print it according to your box design (˛•̃•̃)/🍻\(•̃•̃¸)
Mera xl4016 module volt or apm down nhi ho raha kyakre.
Self ke motor ko chalane ke liye ek battery Banakar dikhaiye
🙏 thanks alot
Most welcome 😊
Very Nice
Nice video
Put the link to the download diagram on the sticker
Amazing idea
सर मेरे पास एक Amplefire है वह खराब हो गया है प्लीज कुछ रिप्लाय किजिए😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭
It's not charging with constant current, current is fluctuating what to do?
That buck converter ain't gonna last long, no ventilation for cooling of it
Excelente... Pero mal Organizado si lo ubiese ubicado mejor 20 por lo demás hay riesgos de corto... Gracias por la información saludos cordiales.
It's not 1-6s lethium battery charger . It's A variable power supply .. Don't use fake thumbnail
You can charge lithium battery
Nope we cannot charge it will overcharge some of the cells you must need a BMS for this purpose or 3xTP4056 in series with different power supply
Ampere is not increasing while I charge battery.. why ?
Awesome
Thanks
Please, I want make lithium battery charger for 36v
Nice
Thanks
No load balancing...
You should have bms
Good good
Thanks
Really is just power supply, no balancing from the charger, its built into the battery, so the title is misleading. Also didn't see the power supply calibrated for output. Those Cheap meters have to be calibrated before using them (they are always off from factory). Other than that was entertaining.
Gambar rangkaian donk..
sir put there mini cooling fan
Good
nice
In the full circuit diagram please
Adjust volt regulator nob connection has given in the circuit diagram
thank
Can you make me one charging station like this one I will first make you the payment
Muja apse ye banwana he sir
Kitna price he
Approx 1k
A. 5digit hosakta he sir
Does
kya aap mujhe aisa banake de sakte ho
Diagram?
It not balanced charge because it does not charge single cell
230 is not the same as 120 60 Hz