Whaaaaaaaaooooooo Tino. What an AMAZING car transformation. You Must make a video on how to polish a car and put on the ciremic coating and what products to use.
Hi Tino, only found out about your channel the other day, now binging your vids! Enjoying your content a lot, thanks for all the tips! I noticed that your cousin has Kosovarian license plates. Love that country, visited once on a holiday! Nearly lost my drivers license because of speeding, but the police officer who showed me the radar picture turned a blind eye, because he didn't want to ruin my holiday. Absolute legend, haha. Keep up the great work! Cheers from the Netherlands
I did my brothers red or should i say badly faded pink Astra and all i had was T-cut at the time. Took me about 2 days by hand and about 5 goings over it to fully restore before a polish. Bloody hard work and i'd never do again or even buy a red car. Great job u2, appreciate the time and upload again.
Fabulous fabulous job Tino 😎🇮🇪
Hi Tino! Thanks for your great video! What is the pre wash cleaner that you use for the car body?
I just found your channel and am very impressed. Very impressive work ethic for every cars and very impressive skills. Wish you lived in US.
So amazing 🤩 which machine polisher would you recommend to new detailers starting out in the UK and which cutting compound and polish would you recommend too? Keep up the phenomenal work 🙌🏽
Amazing, can you also do this to a car with a fading clear coat being half shiny half matte? Or will it need an extra step?
Tengo uno como el del video del mismo color y esta opaca tambien la pintura, Gracias por hacer el video
Amazing! I actually know how impossible this Corsa red is. Bought a low mileage one (town runner), the sun had killed it, ended up repainting it tornado red metallic. Should have known about you then. Welldone, on this Corsa C
Thank you! Even we weren’t sure if it was possible to bring it back to life but it worked 😍
Absolutely amazing Tino I would love for you to visit Australia Melbourne and wash my VW Tiguan R to add to your amazing video collection mate
« إِنَّ اللَّهَ وَمَلَائِكَتَهُ يُصَلُّونَ عَلَى النَّبِيِّ ۚ يَا أَيُّهَا الَّذِينَ آمَنُوا صَلُّوا عَلَيْهِ وَسَلِّمُوا تَسْلِيمًا » 🥰
haha if you know it or not, but this is some high quality ASMR too you present here. it gives watchers the tingles to watch this content :)
I'm surprised this video hasn't gotten more views. This is a textbook paint correction class.
Enjoying the content so much! Can you make a video about tips and tricks on how to create the thick snow foam? I am struggling, always thin and watery foam even though I use a 3500 PSI, 7.5L/min jet wash and upgrade to the 1.1mm nozzle.
Kosovar ka do qe shkon neper bot.
Respekt per punen.
Wow! How long would you say it takes you to clean one car like this?
My first car was a red '87 Golf that turned Pink from the sun. I managed to restore the whole car with Mer polish, did the whole thing by hand! It was a long afternoon but the car turned out great eventually. Refarding the country, I guess your cousin lives in Kosovo 🇽🇰
Awesome transformation! And you should wear shorts and sandals more often! looks great! Just like Stauffer garage!
Hello Tino, what foam do you use to remove the watermark?
This is where your true talent/skills comes by doing cars that need help badly like this. Forget the luxury easy cars to do lol j/k work is work! You got too much skills is all im saying!!! You take pride in your work no matter the vehicle. Keep it up 🤜🤛
I just want to know if the brand of the compound and polish makes big difference bec in my country alot of brands like Meguiar's are very expensive but the is a lot of brands at any way i won't buy the cheapest one bec its literally less than half dolar but can i jus what in my country + what is the brand u using
What chemical did you add to the clay bar? Ty
Judging by the plate RKS it’s Kosovo. Terrible what happened in that country but it’s amazing to see the determination of the people to build it all back up.
Question for you: how often do you change out your microfiber mitts? I know you pressure wash them when you've finished a car but when do you use new ones? Over time, the dirt build up in the microfiber will scratch the paint right?
Yes, once the mitt starts becoming a little rough to the touch, you will know that it is time to replace it
Qata 2 jarana cka bajn atje a pi hajt do qebapa 😂, 👍 respekt shqipe
What pre wash do you use?
Hey tino. Quick question. I pressure washed my Q8 & dried with microfiber towel. Every time i do it i tend to get the water stains on the rear bumper where the trunk closes. Any tips on how to stop that?
Yes, water must be gathering in that area. When you dry the car, open the boot and dry the door jam area using a microfibre. Also, the water may be coming from behind the number plate, I like to blowdry that area and other cracks and crevesis around the boot.
So.. you were in Switzerland? Funnily enough I'm here with my UK red Corsa from 2006. The paint is as bad as you'd expect.
Paint looks bad and a friend wants to buy it so I'd love to make it prettier. Can you tell me where you bought the products here?
Hi Tino,
Rks plates numbers are from Kosovo, but the car sticker is from Czech Republic.
Have fun. Nice to see those results
Hey!
While you were right about the plates, the sticker is from Switzerland actually. It is very common in Kosovo for every car to have CH sticker, as it shows some kind of proudness.
Meanwhile I'm kinda surprised Tino is from Kosovo, as am I. (living in Hungary)...
Shum tfala Tino!
Car looks great! Was it Kosovo you were in? I recognised the flag on the reg
Great video Tino!
What country is that Corsa from :D
i really love how it turned out.
What is compound? Turtle wax?
Tino i really enjoy your videos and u always give me motivation❤
Quick question? Are u from kosovo or u just have ur family there? Because im from kosovo and i would love to see you.
How long does this result last? If you park outside, 1 yr and it will look the same as before the job
It takes quite a long time for a car to oxidise to that condition, and with the ceramic coating on top it will take even longer. So I would expect this car to look in good condition for at least 5 years or more
What kind of ceramic coath you are using, and how much time you wait after applying ceramics.
Almost all "9H" ceramics needs 48h to dry and a week to harden. You can dry it faster with UV lights (it's in general what pro does). But you should not wash the car for a week after application. Also, use soft shampoo for washing when ceramic coated. It preserves the ceramic.
I would recommend using any plush and soft microfiber cloth. Also, as the gentleman above correctly said, 48 hours is a good minimum to aim at for curing time.
hi tino i think it is best for you to wear waterproof boots when you are pressure washing what do you think tino let me know
1:42 Kosovo. I´ve had to look up what RKS stands for. But why does it have a Swiss Sticker on the back?
rks stands for kosovo plates and swiss sticker means that the car has ben imported from swiss
Are you guys washing cars in kosovo now?
Damn!!! Now he can sell it for double the price.
A polirat kerre shoq a veq UA-camr je
Czechoslovakia
Yoooo, man is in Kosovo?? Greetings from Bosnia haha 😅
If i can ask, where are you from?
You're in Mexico
Kosovo pristina
Direct sunlight not good
Youre i KOSOVO THATS WHERE I AM FROM
Kosova Zemmmerrrrr
Are you from Kosovo?
Law of attraction: I hope we are all successful in life thank you pls pin me Tino
You're in Kosovo or Czech Republic.
Its in Kosovo
kosovo prishtina
Kosovo, lol
4th world country.
TINO??? What are u doing with a car from Kosovo? Hahahhaha dont tell me ur albanian?
Hello chaps! I have had to re-upload this video due to some audio issues. I wish you all well and I hope you enjoy the video. If you would like to buy some of the products used in this video then check out the Tino Car Care Store: www.tinocarcare.com
A rupes 15 inch dual action polisher would be a good investment for you bro it is a night and day difference from the stuff you can buy at shops like Halfords. I’d recommended blowing out your pad much more often especially in jobs like this where residue control is essential, it will save you a lot of time when finishing and refining the paint. With older cars like this the oxidation and ‘dead skin’ of the paint collects in your pad much more quickly and if you continue to use the pad dirty it creates micro scratches, swirls and general haze, meaning you have more work to do with the fine pads in the later stages.
hi tino love your vids what type of products and tools do you use when cleaning cars keep up the awesome videos
Law of attraction: I hope we are all successful in life thank you pls pin me Tino
Yooo bro I watched your video and i know it,that you are from Albania hahahahahaha
Čo