Some ideas I thought of. When call recipient pick up, wait 2-3 seconds and have speech synthesis announce why call is made. Then detect tones. Dial 1 to hear conversation, 2 to get GPS coords spoken if available (then have option to text them, this is helpful if GPS not found earlier, or announce nearby address). If multiple buttons, one can be medical sos, another car trouble sos, another "miscellaneous" sos (for the unexpected), another maybe simple location update. Just some random ideas
Excellent project. I have a suggestion: instead of a dedicated power switch, the SOS push button can be used as a soft latch power switch with just two transistor/mosfets. Then after a couple of minutes the watchdog timer of the the microcontroller can be used to either switch off the device completely or the system would enter into a deep sleep mode.
Hy bro can i get an option to get the speed of the motion....like ttgo module... I am working on a project where, it will be used in a race car ..i need the speed to be displayed with sos option..
@@techiesms Nice idea for a future video. If you can drive the sd adapter from the ESP32 (there are pins for it on the side) then it would make for a nice compact GPS tracker with GSM capabilities
sir i want to buy this project how can i buy and can you please guide me that which software has been used to run this code how can we present this to someone ?
Why my a9g module always showing the NMEA lat and long of china even im in the Philippines? I already updated the firmware and stand nearby the road and still the AT GPSRD command shows the gps of China. Also when I tried to send sms It is working but its always a blank space?
It would be better if you could set the SOS number by using a SMS and a password. Therefore, if you need to change the number, you do not need to program all over again.
Some ideas I thought of. When call recipient pick up, wait 2-3 seconds and have speech synthesis announce why call is made. Then detect tones. Dial 1 to hear conversation, 2 to get GPS coords spoken if available (then have option to text them, this is helpful if GPS not found earlier, or announce nearby address). If multiple buttons, one can be medical sos, another car trouble sos, another "miscellaneous" sos (for the unexpected), another maybe simple location update.
Just some random ideas
Excellent project. I have a suggestion: instead of a dedicated power switch, the SOS push button can be used as a soft latch power switch with just two transistor/mosfets. Then after a couple of minutes the watchdog timer of the the microcontroller can be used to either switch off the device completely or the system would enter into a deep sleep mode.
But after than the audio spy feature won't work
One video I got but blynk app is paid now asking for subscription
The way you explain the code and entire project is awesome brother..please keep doing this kind of projects
Thank you 😇
Hey, sachin u r really brilliant man... your projects were always unique and useful.. l learned alot from your videos.. keep it up
Glad to hear that our videos are helping you 😇
Kindly share our videos to share knowledge
Which board we have to select whilte uploading code ?
Hi. Sachin is there any difference if I use the full sized ESP32 WROOM UNIT ?. In South Africa it's rather crazy finding the Seeed Studio ESP32 XIAO ?
Bro can we use any other regulator ic instead of 7333A ? If yes ,pls name the iv
Sir in this video you show wiring diagram (3:20) , but after soldering i see gps module (3:35), no show in wiring diagram
Hey Sachin sir great video. I leaned a lot from ur video. I will surely try to make this project 😃😃
Awesome
Is it possible to turn it on remotely via blynk iot or other app instead of a push button?
Can you use this without cellular network?
Very exciting man ❤🔥
Nice one..hey Sachin can you make a friendship lamp with ws2812b led strip and esp8266 module..?
Wait for it . Thank u brother.🙏🙏🌹🌹
Is it possible to use AirTag system to get the location when GPS isn’t available?
Nicee project. Is it ok to use cp2102 module instead of xiao esp32 c3?
I really need your answer plsssssss
wow, very interesting project... i want to build one... thank you so much for sharing....
Can we use naormal single esp32 in this
It will work only 2g net work
Or it will work 3g and 4g also
Hello, this is a brilliant idea! May I know how far can it send the signals?
Hello sir, can this board use several sensors without the help of other microcontrollers?
Hello very nice project i followed your instructions and did it sir but when I uploaded the code, the Arduino app is saying invalid
Hello, what will be the battery life of this project.
When we need to charge again.
We can add low battery notification in the project.
Hello bro can I use the normal esp32 board
Hy bro can i get an option to get the speed of the motion....like ttgo module... I am working on a project where, it will be used in a race car ..i need the speed to be displayed with sos option..
What did you do to avoid blocking the URL location from your network?
sir i have components of esp32, neo6m, gsm sim800l, push button can you tell how can we do the same project with this components.
Which language of coding used in this project
Can we use seeed seedudino xiao
sir can we use esp32 board instead of Seed Studio XIAO ESP32C3. please give answer sir!!!!
Yes
@@techiesms thanks sir
Sir can I use Esp32 big board for this project ? Please reply me 🙏
sir, where can we put the on/off switch? it is not on the diagram.
if D0 and D1 is not declared, how is the code being compiled?
Great video as always. Thanks indeed
Glad you enjoyed it
Nice video. Have you tried using the SD card slot on the A9G?
Not yet
@@techiesms Nice idea for a future video. If you can drive the sd adapter from the ESP32 (there are pins for it on the side) then it would make for a nice compact GPS tracker with GSM capabilities
Very nice and helpful project sir.👍👌👌
Thanks
Hii Bro...Can I buy this Project...From you?
It will works 4g sim or not
sir i want to buy this project how can i buy and can you please guide me that which software has been used to run this code how can we present this to someone ?
Why my a9g module always showing the NMEA lat and long of china even im in the Philippines?
I already updated the firmware and stand nearby the road and still the AT GPSRD command shows the gps of China.
Also when I tried to send sms It is working but its always a blank space?
sir in code type u work in c or java program
C
Tq sir❤❤❤
can we done this project with esp32
I love the project but you haven't shown the full steps of making it and how its integrated to send notifications to any smartphone
How to send multiple number sms.
Thanks
how about the on and off button connection?
im beginner here which board should i use for code implementation?
can i replace it with ttgo tcall v1.4
Do you have a complete kit/materials for this project and can I make an order of it?
Yes
We are selling in kit form
www.techiesms.com
Can you create esp32 blynk iot 8 channel really code please reply
Bro this kit is in out of stock pls provide me 1
can't buy, no PayPal pay option and no shipment to Australia 😞
And amazing project love it
How can we used in arduino board
Sir it is showing erron as wificlass has no named declared
Can you please provide the circuit diagram for it ??
Can I buy this device
Where is the sim card is inserted in a9g board?
On the back of A9G board
Brilliant 👍👍👍
It would be better if you could set the SOS number by using a SMS and a password. Therefore, if you need to change the number, you do not need to program all over again.
Does this also work in another country like the Philippines?
May I have permission to use this for my Research Project?
If you have 2G connectivity available then yes it will work and you can use it
That animation was amazing 😍😍
Video too is amazing 🤩
Shukriyaa
hello can you pelase help me that how can i input this code into the XIAO c3 , because iam a electrical student i dont know how to insert please
Watch out our getting started video with XIAO ESP32c3 ua-cam.com/video/PZZYTYN8hjc/v-deo.htmlsi=1Esf193CZCtXzZoM
I'm interested to build this project, is the program source code also included here?
in my GitHub repo
What website is for code
can I use arduino nano instead of xiao
Yes
will this code work for esp32 instead of xiao c3 board
Yes
Can we add buzzer and provide electric shock to attacker
i thought of this i even asked chat gpt but if it's going to be as a watch i think it will be hard and not that practical
hey, where is the on/off switch connected? it is not in the diagram.
In between battery and A9G board of +ve terminal.
Now I know your location I m visiting you😙
It was already on gmap😂
can you provide me std research paper for this project
Amazing 👌👌
Thanks 😊
Thank you bhai for this
You're welcome, bhai! Remember, sharing is caring.
too good Sachin Sony
Bhai Project kitne me do ge?
You should sell ht7333 voltage regulator. It is hard to get these regulator.
Noted
Yh project hum log bnyae but work nhi kr rha why plz help
can you tell me cost for this project?
techiesms.com/product/multipurpose-gps-tracker-kit/
Where is the code ?, someone please send the code
Please make keypad phone Nokia Display use call and message send option incoming call phone 📱 please 🙏
Also helps the elderly.
This is a 2G device. As the 2G networks in Australia have been dismantled the mobile part of this chip is not functional within Australia.
Thanks sir nice video
Thanks
Can I buy your project
Yes
Just WhatsApp us on +91 82000 79034
Project diagram..
Bro i need Full assemble kit
It’s available on our website
www.techiesms.com
@@techiesms i need assembled that means soldering
SMD components will come per soldered while other components you need to solder
Arduino program???
Hlo bro project is working bro output is not coming please help bro
Nice
Thanks
Plz send source code..
Can I Get The Code For This Project Sir 😁🧐
Check description
Thank you so much Bro 😊
Awsome.
wire.h doesnt exsist
What do you mean ?
Cool
Great video! Thanks.
Glad you liked it!
I want to call you regarding a project. How can I call you ?
You can WhatsApp us on
+918200079034
sir is it necessary to use ht7333 in this project please answer sir
Nice
Thanks