It is very clever! It is a complicated design but as always you make it looks so easy! Great tips for building the surfaces and especially the alternative to the trim-edges. I had never thought of making the pattern in this way! It's an eye opener
Love your videos. So helpful! Can you do a few basics video like how to make claw/prong settings and tube settings for the different gemstone cuts and how to do a hidden halo underneath and so on?
I have a playlist for stone setting on my channel. check them out. I also have a course for stone setting that discuss most setting in depth. You can check it out at www.pjchendesign.com
Thank you so much!!is it possible to apply texture between pattern before twisting?? problems with the boolean?? ? thinking about finish surface between pattern when is casting!! Cheers PJ!!
You can and always want to apply pattern before twisted or deform. You may want to consider the patterns size. If it is too small, it won't show after casting.
@@PJChenJewelryDesign Thank you for your answer. I found the problem, the lines overlap as you said. The result is perfect. My only problem is that my ring is only 42 gr :))
Hi, I watched it as a reminder after a long break from designing. I couldn't wait for the end of video and to see how it will be joined/boolean union into one piece for printing out. At the final stage, the boolean command fails. The ring is not solid. Can it be printed like this? Thanks
I have playlist of Q/A on my channel. There are several video discuss boolean issue in depth. you can check it out. as for the 3d printing, you can print it out even all the part are not boolean as long as they are solid.
@@PJChenJewelryDesign Thank you for your reply. You are not a bot :) Your channel looks very didactic. Your detailed and instructive videos era very encouraging to me to come back to design and join your PRO channel. Just have one question about interacting with you as a tutor. Could I ask questions if encountered any problems to get a solution? By the way, I remember the problems with Boolean Union before and even now in your video after ArrayPolar 24 pieces can't be Boolean Union :( But after ArrayPolar 12 pieces can be Bolean Union plus rotate/copy it I can get 24-piece solid. It looks like there is a limit for intersected parts or so, doesn't it? Regards
Hello PJ! Can I ask a demo for a ring? which shape is like, an ivy vine climbing through a finger, there should be a few tips of ivy vines and the upper part of a ring shank gets a little smaller as fingers sharpen. It is like the antler ring you made before, but simply this time, the antlers are wrapping and growing through the finger. I wish to know how to control the each end organically.. and I have to make leaves at each end of the vines, so if you could do that as well, that will be great! and also everything should be half-rounded through the fingers like a normal ring. I though about making things and let them stick to a tapered extrusion and boolean difference it, but there should be a better option with subd I guess….? Hope my explanation is clear….By the way I received the computer so that I can install rhino7 right away today! So subd should work! Thank you so so much!
Please i want to ask about the name of this app and if there is an extremely similar free alternative downloadable on an android in order to be able to use these tutorials on it
your youtube videos are too difficult to learn from,its too fast. if this is the way your course would be , i planned on buying your course but i wont. you hide some of the significant steps in your youtube videos ,i dont know if this is a tactics to get people to buy your courses,then it is extremely disappointing. why put up video that people cant learn from by following the steps you used in the video. thats not fair at all. your videos are too fast.
This is the Best channel for learn rihno 3D 😊😊❤❤❤❤
Glad you think so!
It is very clever! It is a complicated design but as always you make it looks so easy! Great tips for building the surfaces and especially the alternative to the trim-edges. I had never thought of making the pattern in this way! It's an eye opener
Glad you like it!
www.youtube.com/@matrixrhinoceros3ddesigntutori
Amazing demo !! Thank you for all your help
Glad it was helpful!
Very creative! Even though I knew all the commands you used, I never thought of combining them like this. Congratulations!
Glad you liked it!
www.youtube.com/@matrixrhinoceros3ddesigntutori
You literally save my life, thank you so much!!!
Happy to help!
My youtube professor ♥️
Yeah!!
Good one. The design looked complicated, but actually pretty easy to make.
Thank you. Glad you like it!
Thank you!❤ Great turorial!
Glad you liked it!!
What an amazing looking ring
Thank you!!
Amazing video! I learn so much from your lessons. THANK YOU PJ!! :)
Happy to hear that!
www.youtube.com/@matrixrhinoceros3ddesigntutori
complicated design but you showed us easy way.....thank you
Thanks for liking
Been learning so much from your videos, I would love to see one on crating more organic textures. To create a woodgrain ring shank design.
I have a playlist of texture. There are a lot of different texture you can check them out.😀
Great inspiration!
Glad you think so!
thank you, really helpful, very easy to understand
Glad to hear that!
Thank you pj sir.from India
You are welcome and welcome to my channel.
Nice design!
Thank you! Cheers!
Great video, like always!
Thank you! Cheers!
Unique one...
Thanks!
Love your videos. So helpful! Can you do a few basics video like how to make claw/prong settings and tube settings for the different gemstone cuts and how to do a hidden halo underneath and so on?
I have a stone setting playlist for you to check out ua-cam.com/play/PLXeFqCRRSA3ifF2TEKEk4G3WnyPW_-0DQ.html
www.youtube.com/@matrixrhinoceros3ddesigntutori
Very smart way to get the shape
Thanks
Thanks PJ
You are very welcome!
Great pj ..!!!
Thanks Ricardo
The boolean split doesn't work for me
Beautiful❤
Thank you! 😊
Thank you sir.
Most welcome
Great explanation just like always . Can you please do a vd about how to put stones on the rings with prongs and evry thing
I have a playlist for stone setting on my channel. check them out. I also have a course for stone setting that discuss most setting in depth. You can check it out at www.pjchendesign.com
So beautiful 🤩
Thank you! 😊
very good and exclusive
Thanks!
Pls make foxtail chain
woow. great job, thank you very much. շնորհակալություն տեսահոլավակի համար
You are welcome!
thanks a lot mam very nice of you
Most welcome 😊
Wow nice wonderful super
Thank you so much
Excellent
Thank you
Very very nice
Thanks a lot
Hi PJ, how do I merge all the surfaces at the end so it is one solid object to 3d print? Thank you, Landon
Boolean Unit all polysurfaces
Very very good 👍🙂
Thank you very much
Hello sir, you are a great teacher.
Can you please make a video on grasshopper tutorials
Noted. I may have some later.
Awesome
Thank you 🙏
Thank you so much!!is it possible to apply texture between pattern before twisting?? problems with the boolean?? ? thinking about finish surface between pattern when is casting!! Cheers PJ!!
You can and always want to apply pattern before twisted or deform. You may want to consider the patterns size. If it is too small, it won't show after casting.
Good job,
Thank you so much~
No problem 😊
👌
Thanks
Application's name please
you can find the detail at www.rhino3d.com and use the 90 days free trail.
مرسی
Even though I entered the same measurements in all the models you made, I still get the boolean failure error in almost all of them.
The seams maybe overlapping. I have several Boolean issue videos in the Q/A playlist. welcome to check them out.
@@PJChenJewelryDesign Thank you for your answer. I found the problem, the lines overlap as you said. The result is perfect. My only problem is that my ring is only 42 gr :))
Genial!
super
Hi, I watched it as a reminder after a long break from designing. I couldn't wait for the end of video and to see how it will be joined/boolean union into one piece for printing out. At the final stage, the boolean command fails. The ring is not solid. Can it be printed like this? Thanks
I have playlist of Q/A on my channel. There are several video discuss boolean issue in depth. you can check it out. as for the 3d printing, you can print it out even all the part are not boolean as long as they are solid.
@@PJChenJewelryDesign Thank you for your reply. You are not a bot :) Your channel looks very didactic. Your detailed and instructive videos era very encouraging to me to come back to design and join your PRO channel. Just have one question about interacting with you as a tutor. Could I ask questions if encountered any problems to get a solution?
By the way, I remember the problems with Boolean Union before and even now in your video after ArrayPolar 24 pieces can't be Boolean Union :( But after ArrayPolar 12 pieces can be Bolean Union plus rotate/copy it I can get 24-piece solid. It looks like there is a limit for intersected parts or so, doesn't it? Regards
show how to place stones.
Thank you for the video
You can check out the stone setting playlist on my channel!
Hello PJ!
Can I ask a demo for a ring? which shape is like, an ivy vine climbing through a finger, there should be a few tips of ivy vines and the upper part of a ring shank gets a little smaller as fingers sharpen.
It is like the antler ring you made before, but simply this time, the antlers are wrapping and growing through the finger. I wish to know how to control the each end organically.. and I have to make leaves at each end of the vines, so if you could do that as well, that will be great! and also everything should be half-rounded through the fingers like a normal ring. I though about making things and let them stick to a tapered extrusion and boolean difference it, but there should be a better option with subd I guess….?
Hope my explanation is clear….By the way I received the computer so that I can install rhino7 right away today! So subd should work! Thank you so so much!
maybe this one ua-cam.com/video/tC29VBP6ztc/v-deo.html
@@PJChenJewelryDesign thank you so much!☺️🙏🏻🙏🏻🙏🏻
@@Kk-jj3xi You are welcome
Very good job sir,,,,,thank you so much,,,,,sir pls make a video about human face
I have a detail human face tutorial on my SubD course. You can check out the course at www.pjchendesign.com
Очень круто!
Thanks
U are grate
👍👍👍
hello seems to be not able to boolean the middle ring part with outer parts after completing all steps
I have discussed the different boolean fail reason in several videos in Q/A session playlist. You can check them out.
@@PJChenJewelryDesign ok many thanks :)
Nice
Thanks
Please i want to ask about the name of this app and if there is an extremely similar free alternative downloadable on an android in order to be able to use these tutorials on it
you can find the detail at www.rhino3d.com and use the 90 days free trail.
Hello, i am french and i would like to know wich mesure are you using because it is not mm? thank you very much
All my jewelry model are in mm
@@PJChenJewelryDesign thank you very much learning a lot with your videos 😍
🙏👍!
Thank you!
Sir you are lives in country's
help me Boolean split failed.
The seams maybe overlapping. I have several Boolean issue videos in the Q/A playlist. welcome to check them out.
How do I fix this?
The seams maybe overlapping. I have several Boolean issue videos in the Q/A playlist. welcome to check them out.
🙏
👍
your youtube videos are too difficult to learn from,its too fast. if this is the way your course would be , i planned on buying your course but i wont. you hide some of the significant steps in your youtube videos ,i dont know if this is a tactics to get people to buy your courses,then it is extremely disappointing. why put up video that people cant learn from by following the steps you used in the video. thats not fair at all. your videos are too fast.