Very nice legacy build! It’s attractive too! Amazing how little chirp it has. So your secret was to use an 837 and not an 807. Listening to it on the air you wouldn’t know it is a one tube transmitter. You did a marvelous job putting int the light bulbs as power out coupling indicators and explaining why meters weren’t used then. This is exact what a depression era CW transmitter would look like. Vacuum tubes were expensive after all and money was tight. Likewise a ham would buil a one tube regenerative receiver and rely on high impedance headphones which were in plentiful supply back then. They would also operate split frequency because crystals were expensive and hams would tune around listening for a response to their CQ.
Great construction and demo. At 77 y.o. you've brought a lot of memories of the past when, I also used to build valve transmitters for fun. I progressed from a single oscillator valve - like yours - to full three (oscillator, buffer, output) valves, using 2 x 6146 valves with 700 v on their plates. These used to be days of 'fun', with immense levels of satisfaction in the knowledge of operating a self constructed transmitter. Now, in the Solid State era and Class D stuff, things are different...perhaps more efficient but...less fun! Thanks for the great video and 73's from 'Down Under'. 😀
Remarkable how hams were able to build their own rigs back in the glory days of radio. My great grandfather built the first operational church radio station in the US back in the 1920s. He also built his own rig and used it to talk to countries as far away as Europe to the east and Australia to the west. He even gave his daughter's fiance in New Zealand permission to marry his daughter over his radio from his home in New York. This was in 1926. Couldn't have been much more than 25 watts.
You might be right about the 25 watts... that was power output but the power input required on a 1920s transmitter would have been near a Kilo in those times. Hardly anybody had tubes then, even though the military had them developed about 15 years before that. The old spark transmitters had an horrible power input to signal ratio.
How is there not more subs. UA-cam is hurting your channel. I can't believe this is the first time I've come across it. Glad I did finally find your channel. 👍
A very enjoyable project Justin and great to get the feeling the experimenters back in the 1930s would have had putting the breadboard transmitter together. I've previously built a single valve transmitter using an EL84 or PL84 with switched heater supply on a wooden cigar box which was fun. Planning to build a solid state modulator and get it all into a metal project box for safety in the near future. Great video.
Just found you. I must say, the sound is incredibly stable. Nice build of a 1930's transmitter. I'm now going to check out your other videos. Thank you for sharing. Jim
Love this! Been learning Morse since mid 90s, intermittently. I'm at the stage now that I can receive all the alphabet. My 90s Morse tutor Mary, London, explained there's no point in learning it if there's nobody to converse with. It's a shame our local HERC seem to be so reluctant in training me, from being a 2E1 to a G5xx. I'm the only 1 willing candidate during a surplus gear auction to express a desire, but that wasn't enough. Sad. What a fascinating hobby! Thanks 73. 2E1FQN
I'm a tube amp junky that made the natural transition into radio world...I'm playing around with my parts stash experimenting. I bought ta quasi-legal UV-5R to fill the gap and for emergency,, very much like your delema...no one to listen too as I'm currently unlicenced the airwaves are dead! I added an rf amp in hopes of extending range, still no dice!. At this point I'm about to give up thinking that this is a dead end hobby, which sucks because this s#it is really neat! my question does one not need to know morse in order to get licenced?
@@624radicalham not been at it continuously. I've mostly been making up songs and other things like battery valve guitar amps. I only has a spasmodic interest in Morse. Spasmodic pretty much sums me up: a bit of a spaz! Yay! Thanks for comment, n fing. 🎸👀🍄🙂
Hi...mister.... i like so much about your 2 stages tube transmitter.... especially your skill to make communication with cw.... last time i did with am 3,7 MHz.... The last i used 5 stages.....813 x 2.......450 Watts.... only for speaks and songs while speaking likes broadcast... i am from Jakarta...Indonesian...
Nice 30's breadboard rig, Justin! I have built a replica of the Norwegian agent set "Olga", which uses one 6L6G with xtal control. I also have one British Mark XV TX with a 6V6 and a 6L6 in the PA (SIS, Whaddon). Like yourself I prefer using more modern receivers. Maybe we could meet on 80? I have a number of xtals on 80, 3560 is ome of them. Beat of luck and 73 de Stein, LA9QV
Прекрасно!), неповерите, я как раз обитаю в литературе 20-30х и раньше, в эре искры идуги, да интеречные были времена, но у нас на постсоветском пространстве непопулярны такие вещи почемуто😢, успехов Вам, и 73. UZ7QAO
I have 1946 ARRL hand book showing a 25 watt master oscillating crystal controlled 807 and using plugin coil with the HT passing through it. I think that a 6L6 is the same as a 807 from what I have read. You mentioned 12 volts and the valve you are using must be the 12 volt version of the 807 which is a 1625.
I have the 1961 38th edition, I'm not a ham radio operator but I do build custom guitar amps and repair vintage gear and yes the 807 is very similar to a 6l6 in fact you can buy adaptors to run 807 as 6l6s and vise versa allegedly. I have a hallicrafters s-20r and I love it.
Looks like an 807 tube. (As vid was starting. Turns out it’s an *837.* (Do you keep the tube in the Fridge when it’s not under power? Joke, e.g. “Cold 807.”) Note: 837s are a fair bit cheaper than the look-alike 807, are true *Pentodes,* and look likely for possible experiments.
My first electric shock was off the top cap of a pair of 807s in a audio amplifiers. I can still here the music in my head now some 50 years ago. I'm amazed I lived to tell the tail. Funny, not used the 807 ever since, in fact no valves with a top cam.
In order to produce intelligible telegraphy a proper electronic keyer and not an old Vibroplex bug should be used. This sounds ugly, putting it mildly!
Very nice legacy build! It’s attractive too! Amazing how little chirp it has. So your secret was to use an 837 and not an 807. Listening to it on the air you wouldn’t know it is a one tube transmitter. You did a marvelous job putting int the light bulbs as power out coupling indicators and explaining why meters weren’t used then. This is exact what a depression era CW transmitter would look like. Vacuum tubes were expensive after all and money was tight. Likewise a ham would buil a one tube regenerative receiver and rely on high impedance headphones which were in plentiful supply back then. They would also operate split frequency because crystals were expensive and hams would tune around listening for a response to their CQ.
Great construction and demo.
At 77 y.o. you've brought a lot of memories of the past when, I also used to build valve transmitters for fun.
I progressed from a single oscillator valve - like yours - to full three (oscillator, buffer, output) valves, using 2 x 6146 valves with 700 v on their plates.
These used to be days of 'fun', with immense levels of satisfaction in the knowledge of operating a self constructed transmitter.
Now, in the Solid State era and Class D stuff, things are different...perhaps more efficient but...less fun!
Thanks for the great video and 73's from 'Down Under'. 😀
Remarkable how hams were able to build their own rigs back in the glory days of radio. My great grandfather built the first operational church radio station in the US back in the 1920s. He also built his own rig and used it to talk to countries as far away as Europe to the east and Australia to the west. He even gave his daughter's fiance in New Zealand permission to marry his daughter over his radio from his home in New York. This was in 1926. Couldn't have been much more than 25 watts.
You might be right about the 25 watts... that was power output but the power input required on a 1920s transmitter would have been near a Kilo in those times. Hardly anybody had tubes then, even though the military had them developed about 15 years before that. The old spark transmitters had an horrible power input to signal ratio.
How is there not more subs. UA-cam is hurting your channel. I can't believe this is the first time I've come across it. Glad I did finally find your channel. 👍
Thanks! Spread the word!!
Clould you please shere me circuit or shagamatic diagram ?
A very enjoyable project Justin and great to get the feeling the experimenters back in the 1930s would have had putting the breadboard transmitter together. I've previously built a single valve transmitter using an EL84 or PL84 with switched heater supply on a wooden cigar box which was fun. Planning to build a solid state modulator and get it all into a metal project box for safety in the near future. Great video.
You remind me of a 1930s or 1950s experimenter. Lovely build. Nice work! VK4QP.
Just found you. I must say, the sound is incredibly stable. Nice build of a 1930's transmitter. I'm now going to check out your other videos. Thank you for sharing. Jim
Simplemente maravilloso. Lamento no haber aprendido CW.
En otra época con ese transmisor tendría el mundo s sus manos...
Neat, your point to point wiring is much neater than some of the antique radios I have seen.
Love this! Been learning Morse since mid 90s, intermittently. I'm at the stage now that I can receive all the alphabet. My 90s Morse tutor Mary, London, explained there's no point in learning it if there's nobody to converse with. It's a shame our local HERC seem to be so reluctant in training me, from being a 2E1 to a G5xx. I'm the only 1 willing candidate during a surplus gear auction to express a desire, but that wasn't enough. Sad. What a fascinating hobby! Thanks 73. 2E1FQN
I'm a tube amp junky that made the natural transition into radio world...I'm playing around with my parts stash experimenting. I bought ta quasi-legal UV-5R to fill the gap and for emergency,, very much like your delema...no one to listen too as I'm currently unlicenced the airwaves are dead! I added an rf amp in hopes of extending range, still no dice!. At this point I'm about to give up thinking that this is a dead end hobby, which sucks because this s#it is really neat! my question does one not need to know morse in order to get licenced?
30 years and you still can't copy morse? That's not encouraging ... "I'm at the stage NOW where I can receive the alphabet" after 30 years.
@@624radicalham not been at it continuously. I've mostly been making up songs and other things like battery valve guitar amps. I only has a spasmodic interest in Morse. Spasmodic pretty much sums me up: a bit of a spaz! Yay! Thanks for comment, n fing. 🎸👀🍄🙂
I love stuff like this.
I built one using a 61BT valve with about 2 Watts out. 40m and 60m built on an aluminium chassis.
G4GHB.
Beautiful piece of gear! I love the tone drift. Sill afraid of the hv being like 15cm next to you hand
Nice video! I want to build tube CW tx too and I plan to use G807. This is my favorite tetrode) Best wishes from UR7WKH, 73!
Lovely transmitter. I just built a tiny,
Nice job, congratulations! Would you please post the circuit?
I've heard some Amateur Radio operators do voice transmissions where they say something like "CQ, CQ, CQ Delta Xray" when broadcasting.
CQ DX means calling long distance stations
Nice example of what is called a "Dead Bug" radio.
Hi...mister.... i like so much about your 2 stages tube transmitter.... especially your skill to make communication with cw.... last time i did with am 3,7 MHz.... The last i used 5 stages.....813 x 2.......450 Watts.... only for speaks and songs while speaking likes broadcast... i am from Jakarta...Indonesian...
Nice 30's breadboard rig, Justin! I have built a replica of the Norwegian agent set "Olga", which uses one 6L6G with xtal control. I also have one British Mark XV TX with a 6V6 and a 6L6 in the PA (SIS, Whaddon). Like yourself I prefer using more modern receivers. Maybe we could meet on 80? I have a number of xtals on 80, 3560 is ome of them. Beat of luck and 73 de Stein, LA9QV
Nice to see someone else interested in vintage Ham Radio, good job .... W8PU
Pro trick: watch series at Kaldrostream. Me and my gf have been using it for watching all kinds of movies recently.
@Raylan Decker Yea, have been watching on Flixzone} for months myself :D
Excellent video
Прекрасно!), неповерите, я как раз обитаю в литературе 20-30х и раньше, в эре искры идуги, да интеречные были времена, но у нас на постсоветском пространстве непопулярны такие вещи почемуто😢, успехов Вам, и 73. UZ7QAO
Nice but you should show or post the schematic. Thanks!!!
Cool. The jet engines in the back yard fellow is an amateur radio operator. :-)
PCL84 triode pentode makes a nice transmitter with around 2 watts output. just fine for old school single chanel RC
That build is awesome. Good job, 73..KC0SEY
Nice job! How do you switch the antenna and be able to hear your transmission without the risk of burning out the receiver?
I think I was using a separate antenna for transmit/ rx
good job Justin !73 fm UR5 !
Justin, tis a thing of beauty.
73 de Steve M0KOV
Thanks Steve!! I reckon the 1920’s version will be impressive!!
A matching breadboard regen?
M0KOV
PARABÉNS AMIGO, FANTÁSTICO OS EQUPAMENTOS 🇧🇷🇧🇷🇧🇷👍👍👍
I have 1946 ARRL hand book showing a 25 watt master oscillating crystal controlled 807 and using plugin coil with the HT passing through it. I think that a 6L6 is the same as a 807 from what I have read. You mentioned 12 volts and the valve you are using must be the 12 volt version of the 807 which is a 1625.
I have the 1961 38th edition, I'm not a ham radio operator but I do build custom guitar amps and repair vintage gear and yes the 807 is very similar to a 6l6 in fact you can buy adaptors to run 807 as 6l6s and vise versa allegedly. I have a hallicrafters s-20r and I love it.
Great video 73 de Gerald PA3GEG
Cool construction, less and less designers - and young people with noses in smartphones with knowledge of CW are not like that ... :-(
paw and Vy73!
Hi power oscillator, "rock crusher" because they can fracture crystals too much current
10 watts is what Voyager has so I am led to believe.
807 tube? so many years ago i used it
Hi, all these comments are mentioning 807 but isn’t a 1625 the same exact part, I just needs 12 volts for the heater instead of 6 or sumthing
Yes 1625 is 12v version of an 807
Looks like an 807 tube. (As vid was starting. Turns out it’s an *837.*
(Do you keep the tube in the Fridge when it’s not under power? Joke, e.g. “Cold 807.”)
Note: 837s are a fair bit cheaper than the look-alike 807, are true *Pentodes,* and look likely for possible experiments.
For those who don't understand morris code, he asked 4 his phone number.
👍👍👍👏👏👏
is that a 807
837!!
My first electric shock was off the top cap of a pair of 807s in a audio amplifiers. I can still here the music in my head now some 50 years ago. I'm amazed I lived to tell the tail. Funny, not used the 807 ever since, in fact no valves with a top cam.
@@MichaelBeeny beautiful sound in class A running mine at 0.057 amp each tube just a great amp I built the EF37A preamp driver is great
*20 MINUTOS DE VIDEO,Y JAMAS MENCIONASTE, QUE TUBO USASTE??????*
*((INEPTO))))!!!*
837 mentioned in the first 5-6 minutes, deafaid!
In order to produce intelligible telegraphy a proper electronic keyer and not an old Vibroplex bug should be used. This sounds ugly, putting it mildly!
When you think you already know the telegraph, start listening to the chaps with the bugs and learn more)