BEST VALUE 3.5-inch QUAD // Happymodel Crux35 🤑
Вставка
- Опубліковано 4 вер 2021
- 🛒 Happymodel Crux35
RDQ - bit.ly/3yYxXHn
BG - bit.ly/3BJiQl5 (use code BGAlbertKim for discount)
MF - bit.ly/3gXY2hW (analog) | bit.ly/3kSA3St (DJI)
(use code ALBERTKIM for discount)
AX - bit.ly/3h2Bjl1
XT - bit.ly/3yLZqKs
🔋 Lipo - bit.ly/3tfS9pd
💧 Insta360 GO2 Mount - bit.ly/3jfQLdT
OVX303 VTX - bit.ly/3zKLUIs | bit.ly/2VeY65d
ELRS X1 AIO FC - bit.ly/3thrWmj | bit.ly/3jLT5uE | bit.ly/2YZAfso
ES24TX Slim Pro Module - bit.ly/3jIE6kN | bit.ly/3z4RG6O
Narrated Flight #1 - • Crux35 Narrated Flight #1
Narrated Flight #2 - • Crux35 Narrated Flight #2
3.5-inch Quad Playlist - bit.ly/3ySTvUU
🎓 I bought the drone, now how do I set it up?
Watch this - • How to set up ANY BNF ...
🍿 ExpressLRS Playlist - bit.ly/370CYSH
🙏 Please support with a 👍 and don’t forget to hit the 🔔 thanks!
💲 If you enjoy my content, please support my channel through these links
Patreon - / albertkim
Amazon - amzn.to/3zq84zp
RaceDayQuads - bit.ly/RDQ-BF
Pyrodrone - bit.ly/3Bfo3BP
Banggood - bit.ly/3imXlie
Airblade - bit.ly/3ilYVRr
NewBeeDrone - bit.ly/3BhFdPu
Makerfire - bit.ly/2VGI3Kg
Aliexpress - bit.ly/3im17IF
XT-XINTE - bit.ly/3inl7KQ
HGLRC - bit.ly/HGLRCBF
RekonFPV - bit.ly/3BagxIq
BETAFPV - bit.ly/2Ui1Pic
Diatone - bit.ly/3z9y01W
Flywoo - bit.ly/3exnkSJ
Caddx - bit.ly/3etIVLN
Insta360 - bit.ly/2VRDNe5
PayPal - paypal.me/marblekit
👉 Old gear for sale here - bit.ly/AlbertGearFS
👉 Follow me on social
🐤 / albertkim
📸 / marblekit
😀 / albertkimrc
🛒 Check out my Amazon store FAVS - amzn.to/3zq84zp
🎧 Music I Use - bit.ly/AKSoundStripe (use code ALBERTKIM for 15% off)
💲 Banggood Coupons
Drones6 6% off at this link - bit.ly/2ZYjB8c
Parts8 8% off at this link - bit.ly/2ZTES38
Toysho 11% off for new customers here - bit.ly/2FsSqJy
▼ Latest Tutorials
Betaflight 4.1 Upgrade Guide - • Betaflight 4.1 Easy Up...
Diagnose Motor/ESC Issues - • How to Diagnose a Moto...
Basic BNF Drone Setup - • How to set up ANY BNF ...
How to bind SPI receivers - • Say Goodbye to the BIN...
RPM Filter Quick Start - • RPM Filter Quick Start...
▼ RC Gear (Daily Drivers)
Jumper T-Lite - bit.ly/2MGBIxs
Crossfire Nano TX Module - bit.ly/2YWSQSe
Skyzone SKY04X Goggles - bit.ly/Skyzone04X
Foxeer 15cm Antenna - bit.ly/2FRWVkM
Triple Feed Patch Antenna - bit.ly/2P1wMyq
Best Charger - amzn.to/32QgQck
▼ Tools
3D Printer - bit.ly/3f62poi
Awesome & Cheap Tool Kit - bit.ly/2U2CS4G
Electric Screwdriver - bit.ly/2OBa9k3
Cloth Tape - amzn.to/2JpCx5U
Soldering Station - amzn.to/2Pn5J1v
Portable Soldering Iron - bit.ly/2WybP2w
63/37 Solder - amzn.to/2De9rsz
Smoke Stopper - bit.ly/2Zyj680
▼ My Favorite Micro Drones
Eachine TWIG HD - bit.ly/2o0EWPF
HM Larva-X - bit.ly/2KV6ihJ
GEPRC Cygnet CX3 - bit.ly/2TUvFUm
HM Mobula6 - bit.ly/2s13CKn
GEPRC Phoenix 2.5 - bit.ly/2TRpobW
Diatone GT-M3 - bit.ly/2TVaykL
▼ Camera Gear
Sony RX100 Mark V - amzn.to/2xpZk0c
DJI Osmo Pocket - amzn.to/2Q5xGiv
DJI Osmo Action Camera - amzn.to/2W2Btvr
GoPro Hero 8 Black - amzn.to/2VRksqN
GoPro Hero 6 Black - amzn.to/2XwJXNN
Insta360 Go - bit.ly/3e5ZLhu
Insta360 ONE-R - amzn.to/2MefTS9
Galaxy Note 20 Ultra - amzn.to/3b1f8Hq
▼ My Camera Drones
DJI Mavic Mini - amzn.to/2NLF7Zm
DJI Air 2S - amzn.to/2UosklW
My video editor - amzn.to/1VJHWp7
My editing PC - amzn.to/301FYLR
👉s u b s c r i b e - bit.ly/2QH0OZt
💰 d o n a t e
Donate via PayPal - paypal.me/marblekit
Bitcoin - 12Y5vysDMvgqX4Z7h7iRTsgwWoCNwv9MPs
Ethereum - 0xD8f3758678F3d93539F804e36811f0A04B0D047F
Litecoin - LcyGPS2f3NZxWU6BRkCJ5qdk1zV6jUCtn8
👉PLAYLISTS
FPV Camera Reviews - bit.ly/2Nb9WIh
Micro Drone Review - bit.ly/2O2FTOH
Frame Review - bit.ly/2O48KSU
Quadcopter Builds - bit.ly/2O55ypY
Tutorials - bit.ly/2NYJy01
Haul Time - bit.ly/2O2Hkwz
We are an Amazon Associate and your purchases from our affiliate links help support this channel.
GSITVAS1OFIDMEO5
#Crux35 #BestValueQuad #ValueFPV - Наука та технологія
🛒 Happymodel Crux35
BG - bit.ly/3BJiQl5 (use code BGAlbertKim for discount)
MF - bit.ly/3gXY2hW (analog) | bit.ly/3kSA3St (DJI)
(use code ALBERTKIM for discount)
AX - bit.ly/3h2Bjl1
XT - bit.ly/3yLZqKs
💧 Insta360 GO2 Mount - bit.ly/3jfQLdT
OVX303 VTX - bit.ly/3zKLUIs | bit.ly/2VeY65d
ELRS X1 AIO FC - bit.ly/3thrWmj | bit.ly/3jLT5uE
ES24TX Slim Pro Module - bit.ly/3jIE6kN | bit.ly/3yIyFGP
Narrated Flight #1 - ua-cam.com/video/F7u-MzT54Dg/v-deo.html
Narrated Flight #2 - ua-cam.com/video/cfFgutwGLMU/v-deo.html
3.5-inch Quad Playlist - bit.ly/3ySTvUU
🎓 I bought the drone, now how do I set it up?
Watch this - ua-cam.com/video/19i8ob7u3rE/v-deo.html
🏆 September Giveaway Form - bit.ly/2V416S2
🙏 Please support with a 👍 and don’t forget to hit the 🔔 thanks!
💲 If you enjoy my content, please support my channel through these links
Patreon - www.patreon.com/albertkim
Amazon - amzn.to/3zq84zp
RaceDayQuads - bit.ly/RDQ-BF
Pyrodrone - bit.ly/3Bfo3BP
Banggood - bit.ly/3imXlie
Airblade - bit.ly/3ilYVRr
NewBeeDrone - bit.ly/3BhFdPu
Makerfire - bit.ly/2VGI3Kg
Aliexpress - bit.ly/3im17IF
XT-XINTE - bit.ly/3inl7KQ
HGLRC - bit.ly/HGLRCBF
RekonFPV - bit.ly/3BagxIq
BETAFPV - bit.ly/2Ui1Pic
Diatone - bit.ly/3z9y01W
Flywoo - bit.ly/3exnkSJ
Caddx - bit.ly/3etIVLN
Insta360 - bit.ly/2VRDNe5
PayPal - paypal.me/marblekit
👉 Old gear for sale here - bit.ly/AlbertGearFS
👉 Follow me on social
🐤 twitter.com/albertkim
📸 instagram.com/marblekit/
😀 facebook.com/albertkimrc
Hello, you could maybe send me the CLI setting from the manufacturer of this Crux 35 drone. would be very nice
Happymodel are just smashing it lately.
They are KILLING IT! 😁
Always have
this happy model quad shure does make me happy!!! Always enjoy watching a good review and some nice flight footage!
Thanks for watching!
What a great value. Happymodel setting themselves apart from the pack. Perfect for people that are more interested in cruising around. And it can do light acro, at a very reasonable price. Happy flying Albert. 🤓
Absolutely!
I agree and am thinking about grabbing one.
The Crux3 is my favorite quad (with added HM ELRS), so I’ll be looking closely at the Crux35 as well. Thanks for some great info!
😎
Great review. I'm new to the hobby so I really appreciate the amount of detail and background you provide.
😎
This model looks like the best of the bunch. Long flight times are great.
Agreed!
This one looks good and great to see new quads coming out with ELRS receivers built in. 👍
Yes indeed!
I purchased 8 of this happymodel 1404 motors 2 years ago before covid. I only needed 1 motor because I fly single rotor helis. But I purchased 8 because I wanted them to expand the market of this motor. They succeeded in expanding the market of this motor.
😎
I love the ELRS system and am excited for the crux3 3.5... it will be my biggest quad yet!
NIce!
Very informative video I've taken some interest in Quads. In the video your location looks like the LTA Base where I used to fly RC planes back in the early 80's. Thanks for sharing
Cool, thanks
Love this model. Might have to pick this one up.
You should!
Great little drone!
😎
Great video!
Glad you enjoyed it
Was thinking of getting the EMAX Nanohawk X but then saw this...really compelling drone!
Well, this is a different class of drone. Much more power!
great flying!!
Thanks!
Soldering on that FC is so simple. Every connection is clustered separately. it will be a beginners FPV build dream especially those not very good with soldering like me
Good point!
I keep coming back to Happymodel, as much as I think I'll regret it, I don't.
😎
That whole ELRS thing is just crazy, I mean the probably best radio system on these entry-level boards...
eLRS is gonna take over everything soon
So with me getting into the hobby I guess I should just get ELRS instead of crossfire or other systems?
I will not be bothered with *F*Sky again!
The freedom to fly a Whoop or 3” all around a park is amazing.
Also the ELRS cost vs Crossfire or Ghost makes it so compelling.
@@charlesbenson8180 see above…for what it’s worth. Good luck!
hi Albert thanks for the great links and videos,
Glad you like them!
Awesome! Thanks Albert. I'm really starting to love this size class. About perfect size. I really need to pick up one of those insta360 cams to try out some day.
Right on!
Albert there is space upside the small stack to put a DJI air unit?
Nice flying little quad. Wouldn’t mind flying it around my flying field.
That would be cool
Great review as always. I have the frsky version with vista coming in the mail. Is there going to be a uart available to add a crossfire nano rx? Or am I going to be stuck with the frsky spi?
Should be pads available and open UARTs however I don't have that board to confirm.
Nice flying.. This quad size is getting popular.
😎
You know way more than most and you're approachable. You should be designing and producing your own drones. I'd buy one!
You can send messages to the drone companies. I already have many designs from the past but no one is picking up any of them.
@@AlbertKimTV They're doing themselves a dis-service!
Hey Albert bought this after your review , your not wrong its absolutely amazing !!
One thing though I couldn't get the motor buzzers to work ?? Scared of losing it in the grass!! Any advice would be greatly appreciated?💜
Go to the Configuration section in Betaflight configurator. Turn on Dshot Beacon with the two sliders. Enable the beeper on an AUX channel in the modes section. Done.
How does it compare to the baby ape pro v2?
Love the vid
😁
Hey Albert, could you direct me to your video about express LRS? I've been out of the fpv loop for a few months and would like to learn about how can I get it for my radio systems and quads. Thanks!
Here is my whole playlist of videos... ua-cam.com/play/PLPlPgQFfbIvFLP1_IIn2iAtfDGTL99Krw.html
Hey Tanks alot for another great review. is the crux 35 as suiteable for a lightweight cinewhoop conversion like the crux 3? Would the geprc gep cl35 fit on there?
Those frames are not compatible but you could make this into a cinewhoop with the right prop guards.
Awesome flying and review, Albert! 😃
Pretty nice looking quad!
Stay safe there with your family! 🖖😊
Thanks, you too!
Nice I gonna guy the Insta and do the same with my crux35.
I would to have a 3.5 to fly on my backyard. It's too small for my 5 inch :) this one looks dope
😎
What would be the best battery to use with the drone. I'm new and bit confused as there's a lot of differe t batteries out there. Also which charger would I need to use ??
I used this one... bit.ly/3tfS9pd
For the charger, get this one... bit.ly/3YzaitU
What would be your choice between this and the Twix xl from betafpv? Performances wise it seems the betafpv is slighlty better but this happymodel cost less, has a built in stand for external camera (such as peanuts) and above everything else is already ELRS...What is your opinion? What should I buy?
You already seem to know as much as me. I personally would choose the Crux35. Both are great though.
Hey Albert!
Awesome review as always. This is available for 190$ with. polar Nano and elrs. Is it worth it. Also does the esc being 12 on elrs and 20 on d8 matter or it’s fine ? Also what props do you recommend ? I may just pick this one up instead of the Digi whoop simply cause it seems like a steal of a deal.
Am I missing something? Is there a catch cause $ 190 is what I pay for just a vista polar or nebula here in India it feels like the quad is virtually free!
That's a steal. Grab it if you can for that price. The stock props are fine. The Gemfan 3520 will give you more power and less flight time and also stress the ESCs more. Just leave it stock.
It's a very cool little dude! It needs to come join my family.... I'll name him George!
😎
Would you recommend the 20amp frsky verson with a replaced receiver? Would there be any benefits to having a high amped ESC?
I don't think they make the FrSky version anymore. More amps is better if you crash a lot since you'll get big voltage/current spikes in crashes. Otherwise, no real benefit on this small/light model.
Waiting for you to review the new AvantQuad 3.5"
I have no plans to review that and they won't respond to my messages.
Hello. Albert i love Your video's. You helped me once so I could run naked thumb on meteor 75. Now i upgraded for Crux35 v2 f411 aio 20a uart elrs. And everything is fine but I have an issue. At higher throttle engine noise is like chopped and there are vibrations. It doesnt sound smooth at throttle punches... not Uuuiiii... more like burrrrrr. What can be wrong (new one, there was a flight when it was smoother I didnt change anything, radiomaster tx12 mk2 elrs, gnb 4s 650mah) lihv)
Most likely the PID tune needs adjusting. I suggest looking into adding more TPA around the throttle point where you start getting vibrations.
How tight insta 360 go2 sit in this mount? Could it fly away eventually?
What material did you use for print?
It's fairly tight. Unlikely to just slip out but some of that will depend on your printer settings too. I used sainsmart TPU with 100% infill.
If I purchased. The beta fpv 2.4 transmitter...can i disable binding phrase on the spi elrs rx? To b able to use that remote?
I don't think you need to do anything on SPI receivers. Just hit Bind Receiver in the receiver page to put it into bind mode. Then hit bind on the transmitter. If that doesn't work, you can manually "set expresslrs_uid = 0,0,0,0,0,0" then "save" and that will also put the receiver into bind mode.
It's weird how people associate the cost with being a beginner drone in the comments. Definitely a good bang for the buck!
Yeah, why does "cheap" = "beginner" drone? This is an all around good value for any pilot! 🤷♂️
@@AlbertKimTV agreed, the fact this thing can potentially get upwards of 10 minutes is too awesome.
@@ChrisParayno Looks like my old batteries are getting a second life with this one.
@@frankcastillo8869 I feel you!
Nice beginner quad cause if you end up crashing it or looseing it, it wont hurt that much as looseing a $400 quad. Nice review.
This is a good value quad for any pilot, not just for beginners.
Would u suggest this quad as an upgrade for a beginner like me which fly a babytooth at the moment. Thanks
Yes, this one would be a nice transition to something bigger and faster. Definitely recommend it.
Thank you
You're welcome
This having ExLRS and digital would be very nice to own.
🎈
Totally thought the entry code was BGAlbertKim jk! Rofl! I like your system it’s clever! Maybe to clever for me haha! That said, another really cool quad! I’m generally excited about what HM and BetaFPV are doing with expressLRS. They are releasing meta builds a little later than some other brands but they really are offering something different!
😎
What do you think about this for spec park racing? Think it will hold up. Love the cost and atractive for getting into the hobby/sport.
It's pretty light, I suppose with a smaller battery it should be OK for most crashes but you'll eventually find a way to break it and the arms aren't replaceable so you'll have to replace the whole bottom plate which isn't ideal. Maybe get this for the parts and use a different frame?
@@AlbertKimTV Thank you.
Hi Albert and many thanks for your very helpful videos! I bought an happymodel crux35 elrs version and it flies good but maybe it could fly better with a little tune. I noticed someting strange in my filter tuning, compared with the UAVtech presets, especially in the dynamic notch filter width percent it says to put it to 0 but mine is to 8! I tryed to put the uavtech presets for toothpick category but the drone is unflyable. Can you tell me something about this please? I would appreciate it. Thanks
Those presets are set up in a certain way for those filters and you'd have to ask him the reasons why. Probably because it's for RPM filter. The notch filter width percent is probably high for a reason. Perhaps some vibration in the frame. I didn't design that tune so I can only guess. I'm using just the stock tune and mine seems to fly OK. Not sure what you're looking for to improve the tune as you weren't specific about that.
@@AlbertKimTV " Perhaps some vibration in the frame..." you centered the point. maybe the frame or something is not so good and you have to filter a lot to let it fly. And I know that it is not so good to filter a lot. I can find some vibrations while it flyes especially with low speed, propwash. as it is a very strange filter tuning maybe it could be useful to see your point of view to improve the drone.
Anyway thanks for your prompt answer!
Awesome video.. looks like a great little ripper. Six character code?.. with one letter per video?.. 🤔 so we can enter in 5 more videos? Maybe im missing something lol. Ty again for all you do man 🙌
Maybe I need to rewrite the rules for more clarity? In the month of September, I will release 6 videos with one of the characters of the code you need to enter on the entry form. You can only submit the entry form ONE time. If you make a mistake I can't fix it. You can gain more chances to win by commenting on every video I release in September. If I release 20 videos and you comment on each one, that counts as 20 chances. If you answer someone's question on a video, you get an additional 10 chances. Let's say you comment on 20 videos and answer one question in September, you have a total of 30 chances. Let's say hypothetically, there is only one other person who entered the contest but they only left one comment in September. They would only get ONE chance. So in the digital hat with raffle tickets, you get 30 tickets in the hat, the other person gets one ticket... who do you think has the better odds?
@@AlbertKimTV yeah gotcha, but as stated you need all six characters correctly inputted on the form, so we have to wait until the last videos posted before submitting? Just trying to make sure I get in actually xD.
Hoping to get mine soon
😎
Hey Albert, I was scrolling through looking for your weight numbers and I caught a brief glimpse of a message about following the rules. Then when I tried to find that again I couldn't. Is this a new feature on UA-cam when scrolling through videos? Or did I just miss the message on the video going back through?
Not sure why you can't see it as it's embedded in the video itself and there is no UA-cam feature used here. Yes, you need to follow the rules on the giveaway form to qualify. Only qualified entries have a chance. Otherwise, don't waste your time.
There are so many good quads right now, I don't know what one to get :)
😂
Hey there Albert. Thinking of picking up this board... Did it seem to hold up OK to 4s? Was wondering if it might work with 1804 3500kv but maybe that's a bit much. Do you think a jhemcu or zeus35 20x20 aio would fit that frame? (they are a bit longer)
1804 might be OK depending on the weight. More weight, more amps, so keep it light. I'm not sure the other boards will fit. It's very tight in there. Also remember this board has the USB port out the bottom unlike the other boards.
@@AlbertKimTV sweet thanks for the heads up. I think I'll probably just go with a 20amp aio to be on the safe side
Can you buy just the frame? It would be perfect for what I'm wanting to build
Usually the bare frames come out as spare parts after the first few batches of the BNF are shipped out to all the stores. Typically about 4-6 weeks from now.
This is a great deal, how do you think this compares to the new Emax quad?
Nanohawk X is only 1S. So comparing that to this is like comparing a unicycle to a pick up truck. No way to compare them.
@@AlbertKimTV lol yeah I didn't think about that.
i got Crux35 FrskySPI , can i add external ELRS rx without changing FC ?
Yes just connect to one of the open UARTs
if I want , can I use tbs crsf external receiver on this?
Yeah, should be possible for an external RX.
Albert how can I get a
X360 mount like that. Chris Bachman
Link is in the description but here it is since you missed it... bit.ly/3jfQLdT
Hey Albert, with your new giveaway codes... It didn't look like all your videos have a character. How many characters will they be?
There will be SIX characters total as explained in the rules. Only one character has been released so far from all my videos in September. The remaining 5 will be embedded in 5 of the remaining videos released in September. So many videos won't have any characters of the code. It's an easter egg hunt.
Hello my bdays tomorrow I’ve just got a question I wanted to try buy a drone kit for my bday do you have a setup for me that you recommend for around $350 is there away I could message u so I could get some help thanks love your vids their helping me decide what to get😂
Get the Crux35 for about $140, the Jumper T-Lite with ELRS module for about $120, and some Eachine EV800D goggles for about $100. That's the lowest price. You can message me on this comment thread for more help.
Hi Albert. I saw than the fc is a 3-4s power, Did you try it in 3s? Do it work?
Yes, it works but the motor KV needs 4S voltage to fly properly. The PID tune will need to be adjusted and you can't have any extra weight on it or it might not get off the ground.
@@AlbertKimTVOk. Quick response as always (thanks for that). The 3s are not fashionable anymore it seems. And I have a lot them. It seems that the fashion is now 1s or 4s. I miss the larvax hd (RIP). I don't want to put a naked but a thumb 4k. I got the cine8, and it rocks, but I want a thootpick.
Kudos to Happymodel for jumping on ELRS bandwagon early. Can't wait for these AIOs to become ubiquitous.
Only a matter of time... all the boards will come with ELRS and no way to add crossfire... crossfire gets locked out. LOL. 😂🤣😂😁
@@AlbertKimTV Fingers crossed for more development of OpenHD. This should be the next logical step; 26x26 stacks, one AIO with ELRS, one daughter board with OpenHD.
Just a quick question does the fpv goggles come with it or do you have to buy some separate??
You have to buy the other stuff separately. Just the drone only.
@@AlbertKimTV cheers mate
@@AlbertKimTV is any goggles compatible with it or is it certain type mate
Would the sharkbyte vtx fit in here?
Probably but I haven't tested it.
Awesome 👏✊👍
Thanks ✌️
That's nice... what a cool giveaway..👍..
😎
Does the express LRS RX work with the Frsky 9X lite transmitter?
If you have the eLRS transmitter module, firmware versions are the same, and you have updated your OpenTX to support eLRS. See my eLRS videos for more details.
@@AlbertKimTV I'll check them out. Thank you.
really cool
😎
@@AlbertKimTV what quad do you think that is good on a 3s 450mah battery that is a 3ish ich quad, I just bought the iflight turbobee 136rs and realised it is meant for a 4s, so I am not sure if i should return it or keep it if it good on a 3s?
Does the camera reduce the fly time much?
It doesn't seem to reduce it that much which is fantastic.
Albert, can you bind Namimno to Happymodel ELRS, If you can I will order the Crux35
Yes, all brands work interchangeably as long as you flash the same version of firmware on each component.
Every quad should be made like this between whoop style and 5 inch IMO. Unless your doing long range. Maybe different options in motors. If any manufacture see's this they should make different reciever options , different motor options, this thing would sell out. If you could keep around 150$ price point.
😁
I would buy this. Thanks Albert! 👍
Hope you enjoy it!
I’m here again!👌
😎
I am tempted. Need a new controller first.
😎
Would like to see a slim ExpressLRS 900MHz module with more power - I'm stuck on the frsky r9m lite Module atm.
The only one is this one... bit.ly/3h6fT6r
10 minutes is quite a long time under the goggles. I’d consider that more of a cruiser. Price is great on this quad though so it definitely should sell well
Yes, a great cruiser but can do some light acro/freestyle as you saw in the second flight demo. This is perfect for the GO2 camera with my mount.
I looks like the ELRS antenna is pretty close to props or is it just the view angle that tricks my eyes?
Just an optical illusion. No danger of them getting chopped off as long as it's in the TPU holder.
Im looking battery to crux35
😁
nice
Thanks
is it possible using gps on this drone?
Yes
@@AlbertKimTV i already setup gps on this quad, but all the gps parameters doesn't show on gps, can u help me?
On osd i mean sorry
This or the twig xl 2021?
This one is the all around better choice. The XL is probably only best for the very experienced pilots who can take advantage of the slightly better performance. Most normal pilots will not notice a difference worth the extra money.
@@AlbertKimTV would this be good for a beginner pilot, I’m looking at 3.5 inches for my first acro quad
I have other quads but they are all stabilized
Why is there a Z on the screen at 11:45?
Part of a giveaway easter egg hunt that's long over.
I wonder what’s the failsafe distance of that elrs tx at 1 watt?!
No one knows yet. Some guys have tested 100mW out to 40KM and they ran out of video range. ELRS will definitely go farther then your video so you only have to worry about failsafe if you have interference or something was setup incorrectly with your equipment. I've seen a few failsafe problems but those have been known to be user error issues. Unfortunately, no system is good enough to beat stupid people. Haha.
I've been looking at this model but can't find any info if crossfire can be installed, I have no need for ELRS but have spare crossfire nano RX's can crossfire be installed and ELRS disabled?
You can disable the SPI receiver by just choosing Serial and CRSF in Betaflight and solder up the crossfire to an open UART. Wiring diagram is on happymodel's website.
@@AlbertKimTV Perfect, thanks Albert, just getting back into the hobby after a long time out... things have changed quite a bit, last board I flew or set up was a Naze 32...
Nice new kwad with a good price value, but still availible at the end of sept. I cant wait so long
The waiting game is the new normal in these times.
Hallo. Can you recommend this crux35 for beginners in the FPV world? Is it possible to fly it with 18650 liion battery? Greatings from Germoney...
Are you asking about durability since beginners might crash a lot? If you fly it over grass it should be fine. Over a parking lot, not so much. I'm not sure it will be able to lift a 4S 18650 pack. Might be too heavy. I have not tested that scenario however.
Please tell me what connector is used on the drone. xt30?
Yes, it's an XT30.
@@AlbertKimTV thanks)
What is the top speed of this drone?
50mph?
xt30 or xt60 battery
XT30
I don’t like to much space from stack to up part of frame… in analog this drone can be lower…
👌
Cash and crash
🤣
How are you not getting any jellow with the insta360 go?!?! I can't get rid of mine no matter what I do, firmware and all. Nothing works
He talks about it in the video around the 7 minute mark.
You have to mount it such that vibrations are isolated. See what I talked about in the video.
Hey Albert, if you use ND filter and adjust the shutter speed you can eliminate jello without soft mounts. On a sunny day I use nd16, 1/20, 100 iso, under manual mode through phone app.
Yeah, someone else also suggested this to me in an earlier video but it didn't work for me. Also, 1/20 shutter speed just makes a lot more motion blur which makes it look like the jello is gone, but it's still there. 🤷♂️
This is the dumbest suggestion I've seen all day. Clueless about how cameras work.
flight looks really stable but doesn't look like it'll hold up in a crash
Looks can be deceiving. Remember, this is very light. So not a lot of mass to cause a lot of damage. We'll have to see how it holds up in the real world after many people have crashed it in a wide variety of ways. That's the only way to really know.
Prices are rising due to inflation and the devaluation of the US dollar.
🤣
Don't submit give away form, till you have all the letter codes. I didn't realize the form wouldn't be editable after submitting with only one character filled in for the 6 letter code.
That's why I put in there to not submit the form until you have the whole code...
If you watch the videos, you'll see the characters (it won't always be letters). Only one per video but they will only appear in six videos this month. If you don't watch the videos and look for them, there's no way you can win. I only want the prizes to go to people who watch all the videos all the way through. It's a reward for their support.
@@drewbooFPV I always hear some little tid-bit of information I missed the first time, but you can always drag the scrollbar to find the special characters, they are large enough font to find through the little preview window.
What proppelers do you reccomend? ANALOG. 750MAH. CINE - FREESTYLE 40/60