I made my own spaceship from styrofoam using a 570cc. engine
Вставка
- Опубліковано 21 гру 2021
- Vanguard engine 18hp V-Twin 570cc
Welcome to NASAT Channel!
I guarantee you won't be disappointed with the uploaded videos as there are some of the best videos that no one has done yet.
Thanks and hope you will enjoy and not be disappointed with your time spent watching my videos.
Support the channel by subscribing to see more great videos!
If you find it interesting, Like, Subscribe and comment on your questions and ideas, the channel will support and make great videos for you. - Наука та технологія
Chế thuyền hai thân từ xốp sử dụng 2 động cơ | Diesel Crafting boats from foam 1700cc
Build a two-hull boat from foam using 2 engines
ua-cam.com/video/LLOZsz5CwgY/v-deo.html
Dude that is some awesome engineering.
Ffffřv
Mad mad RESPECT 👍🤗👍🤗
Bạn có thể vui lòng cho tôi biết bạn đã sử dụng bao nhiêu epoxy?
I’m looking for ideas 💡 I like what I see, and Will Not Brake 🥰 The Bank 🏦 Thanks 😁
i cant imagine what this guy would achieve with an actual workshop definitely one talented person
Looks like a workshop would slow his roll haha he's got it all
Safety hazard violations. 😂
He would be sabotaged by petty, envious turds, happens all the time.
Trois ans et ingénieux chinois
Where do you think he got the tools and learned how to do this? This guy is a boat builder by trade and this is a just a project that was small enough to make on his patio. Look at his other videos. Dude has a workshop.
Something tells me this wasn’t his first rodeo. There’s a lot of thought and design that went into that boat. Beautiful construction and excellent for calm rivers. I doubt there will be any water skiing behind it. Great ingenuity, wonderful job.👍👍🇨🇦
One big wave and he fkds
Mostly cool.
The forward pointing wings are only to be cool. They are just the right position to catch water and splash It up at the gas tank at slower speeds.
If they were connected a little forward and pointed back then it would work. Ok it won't have that fantasy forward swept jet wing.
@@dass1333 if this is the guy I have seen some of his builds, very cool check him out....
I could see him pulling some tubers
I am almost certain he is excercising his trade. In places like that they have boats like th at instead of cars.
Классная торпеда получилась! Только уши закладывает наверно на ходу. Супер ;-)
I'm 72 and I salute you sir, what an awesome project! So much fun to build something at home which performs so well.
There is just one word to describe this young man. Genius! I have watched many of his build videos and he does all the building without and special tools or equipment. And most of the builds are done in his living room. So for someone to say " I can't do this!" needs to watch this man"s videos.
Styrofoam and fiberglass, cool , amazing and need plastic sheeting? Interesting, ingenious but simple which is the beauty of it
more signal, less noise
I can't do this
@@MrChocozz hahahahahahahaaa, me neither!!!!!
I cant do this... because I have no time. If I had the time and the desire I could do it but seeing as I dont. Still props to this guy for building an awesome little boat.
I worked internationally for years, and much of it in third world countries.This guy has skills far beyond a normal person… The creative level of this is past what most people understand. Just from seeing what he can do, and the tools and stuff he had to do it with, tell me he’s an entrepreneur in his world.
Most great ideas historically came from poor people and rich people went around the world stealing there ideas
They run devil tail leaf boats in Thailand that are outrageously fast. Its basicly a surf board with a high power motor and a long shaft they drop in the water behind the boat. They are insanely fast on a straight away
did you see the guy that used his foot as a lathe chuck and he made Rounds for chairs and railings. search YT for it!!
He has obviously been exposed to the tools and the hardware since a young age.
Look at what he was able to build just because he has the tools. Imagine if he was able to experiment and teach and explore his interests. . . . . .
Americans used to be like that, now we're all a bunch of lazy IDIOTS.
Tesla, GM, Ford, Nasa….are you seeing this guy? What a brilliant mind!! All I can say is wow. You are a very special person indeed, Nasaat. Thank you.
Thật tuyệt vời khi Việt Nam có những người như bạn. Hãy tiếp tục phát huy khả năng và đam mê để truyền cảm hứng đến nhiều người nữa, bạn nhé!
Seriously cool. The twin cylinder engine sounded better than I expected too!
Thank you very much, I will try to improve and do better. Hope you guys always support me!
Респект. Молодец парень. Бюджетный вариант глиссера (лодки) . Каждый сможет повторить.
Большое тебе спасибо!
Это пенопласт?
Только использовать либо в глуши, где нет никакой власти, либо потратить возможно больше, чем на постройку на регистрацию и возможность вот так покататься.
у нас такие движки не продаются, же. Это в ЮВА обычное дело, станционарник в лодочке
Today's kids in America, are too busy with self entitlement, video games, skipping school and such to be able to develop the creative skills necessary. They depend on Amazon and China manufacturers. Plus the technical instruction in the various schools is non existent. My son went through school without shop, woodworking, welding home economics and such, being offered. Thankfully he is very hands on with myself and my friends, who actually started shop class in 5th grade and continued to graduation.
This project was a great experience. In his world if you want a Jet Ski, you build it. I like his water injection for exhaust noise suppression and cooling off the pipe.
Ты большой молодец,ты умница и красавчик....желаю удачи...👍👍👍👍👌👌👌superrrrr.
This is one of the most impressive creations that I’ve seen made by one man’s ingenuity in a long time. It’s totally impressive..👍😎
I agree. We should latch on to people like this to take us into furthered fields of endeavor
Thank you my friend for sharing your efforts with your designs and creations. Good works! Have a Merry Christmas !!🎄🎄🎅🎅
Thank you so much for always following and supporting me! Wishing you a merry and happy Christmas!
No shop, no garage ... just front porch! Giỏi thật đấy cháu ạ!
Chia sẻ video tuyệt vời quá bạn ơi chúc bạn sức khỏe thành công hẹn gặp lại...
Как всегда отличный результат.
Пора построить лодку на подводных крыльях.
движок оч дорогой 2 шт баксов
@@Federation_Open откуда такой ценник ты взял???
@@user-le3kq9uz7k на паРаше всё очень дорого - налог на вЯличие:)
Are you freaking kidding me?? This guy built this from scratch with his own two hands... awesome!! Imagine what this guy could do in an actual workshop!!
Well, I mean this guy did have metal tubing, a welder, and enough styrofoam to build the pentagon, not to mention the 570cc engine, but yeah, with his own two hands I guess.
oh, and a paint sprayer with paint.
oh, and the angle grinder and a hammer.
oh, and a monkey wrench and a mallet.
also sheets of metal
That is a well done build! It looks so much fun to scoot around on! Love from the USA
Sông đẹp nước xanh sạch quá, hy vọng nó sẽ còn sạch mãi
Красивый кораблик получился, it's beautyfull Boat
Fantastic skills and creativity. The hydrodynamics, buoyancy, stability etc of the boat looks good. This is something not easily achieved by amateurs, so you obviously know what you're doing. Great work!
You're a bright young man. If you built these for a living, you would be a millionaire.
I love how everything got secured without all the "over-zealous" craftsmanship footage. Cool vid!
Dude, just pretty much built his own homemade hydroplane...totally sweet!!😃
*spaceship
Parabéns pelo seu trabalho!!! É um prazer assistir seus vídeos. Obrigado
Vừa vào đã nổi cả da gà 藍giọng a Phúc hayyy quá, mong sẽ tiếp tục cover ạ ❤️
You're a "visionary"...... seeing this in your head & putting it out as a finished project is very fun to watch but better than that
it tells others what is possible. I like the way you put the pipe for the drive shaft, I didn't see you make measurements so I
guess you stuck it in there knowing you'd make the the work out later, after all, it's not like you had a plan to go by? Back to
the "vision" of a spaceship.... now you've got me thinking about all of this & any old lawnmower engine will work. Thanks!
You always make awesome boats - great stuff, thanks for sharing your efforts. Good jobs!
Thank you very much!
Tem como passar as medidas ?
Awesome design. What most don’t see is this basically a prototype. I’ve worked in fiberglass, some more layers and veils with stiffeners for strength and he can make it better. Can’t wait for the next one.
So is that just a standard fiberglass resin he's using? Not sure why, but I assumed the resin would eat through styrofoam.
@@highwaytoquail754 I really don’t know. I was surmising based on my past work experience with fiberglass. Alot of my work was with polyurethane and fiberglass as well as with frp sheeting. I would need to go back and review but it did not look like he was using styrofoam. It looked like HDPE polyethylene sheeting. Sorry I can’t help more.
@@highwaytoquail754 the stuff he was using looked really clear I've never honestly seen a fiberglass resin that is completely clear I think it is epoxy he is using instead of fiberglass resin. I'm only guessing though.
Thank you very much, I will try to improve and do better. Hope you guys always support me!
I worked 20 years as a mold maker , what he has there would make a great plug to make a mold off of , then he could lay up some really strong ones out of 100 % fiberglass . Lots of people love little toys like that & could be made with different motors . He might be sitting on a real nice little business for himself .
It feels like we are Riding with you the viewers thank you for the video it was awesome and a great experience
You my friend are nothing less than a genius. Great work, well done. Take care and keep safe.
Cool concept. I wonder why we didn't see him dipping the craft in tight turns? Maybe it would rip off the canards? I think . I likebthebwater cooled exhaust. Overall an entertaining watch.
Fantastic! This is the same way Apple started out. Building a computer in their garage. We have a new boat builder. And his boat meets the boating safety rules, if it breaks apart ... it will float and it's also has a 4-stroke engine so he could run it on Lake Tahoe. Nice job looks great too.
He is talented no doubt, but you give him too much credit. This building technique has been used in America for 80 years to build personal hovercraft.
Phải có nhiều video như này để át bớt mấy cái thứ ưỡn ẹo, nhảy nhót như loăng qoăng của các idol thần kinh.
Lần tới các pro thứ chế con cỡ lớn đủ 3 khách ngồi và giấu cục máy đi.
Đẳng cấp - trình độ !
One of the coolest videos I have seen. Guy is talented. Limited resources. Much respect.
Amazing boat brother!!! Best boats you can make are using styrofoam and epoxy-resin, fiberglass or carbon fiber for the skins. Can't sink it and it weighs almost nothing! We've built stuff like that too here out of mahogany plywood for our vintage race boat's we run up and down the rivers in the US. I was amazed you didn't use any wood reinforcing along the bottom to keep it from twisting under torque of the engine or waves? But it definitely performs amazingly well for a 4 stroke Briggs and Stratton! I have one of those engines the 570cc Briggs with everything done to it from billet aluminum rods and pistons flywheel, to billet steel camshaft with a Eaton M-24 supercharger on the thing. They are animals for sure and with the good parts in them you can really make a lot of power with one! The head ports need a lot of work though for better flowing ports, but with a little time and a grinder you can make it happen fairly easily. If you're still running the governor on the engine and you wish to get more RPMs just replace the connecting rod's and valve spring's to handle the higher rpms. If you wish to get really fancy with it? They have all over eBay used 2 barrel intake manifolds and carburetors you will get a big change in power from and it's not a lot of money being used parts. We would run the dual port intakes with a large single carburetor like a flat slide Mic or something like that off a street bike engine makes tuning them that much easier for jets and parts. Otherwise awesome build my friend! Stay safe over on the other side of the world, there's lots of big fish in the rivers over there that eat people LMAO! Keep up the great work!
Can make awesome rc boats out of the same materials.
You sir are awesome!
Don’t insult the guy. It’s a spaceship. Check the title of the video.
The twin strakes on the bottom worked just fine to keep twisting under control.
Thank you very much, I will try to improve and do better. Hope you guys always support me!
Such a joy watching you work and what you create with tools, or lack there of. You, can build anything from nothing, where many with complete shops would have trouble building or the ideas you have from. I am calling you the junkyard king. Which is NOT a slam. It is a high level to be proud of......Cheers
leave the reference to American tv and basket ball jargon out and you would of made a great comment- give up on the cowboy trip, genocide is nothing to be proud of, neither is colonial imperialism.
MacGyver on display, your talents are incredible...
Any parent with a kid interested in boats, sailing or power, should strongly encourage them to build their own small boat. Even if it sinks, there is SO much useful info to be gained by the experience.
It’s amazing what can be done with the most basic tools and some creative thinking and determination 👌🏼
It sounds awesome and looks pretty fast! I always wanted to build my own boat
Amazing video footage capturing, drones has really revolutionized Videography
Cháu giỏi quá, hãy phát triển tài năng của mình để phục vụ mình và cộng đồng đi cháu chúc cháu tc 😍😍😍😍😍😍😍😍😍😍😍😍😍😍
You always do a super job on these boats of yours. Love watching what you accomplish!
*Congratulations friend on your work it's just amazing, thanks for sharing. 🇧🇷*
เยี่ยมมากๆเลยครับผม เพื่อนใหม่จากประเทศไทยขอชื่นชมในการสร้างเรือแบบยานอวกาศสวยๆแบบนี้เลยครับ 👍🏻
Keren banget bos,bisa buat mancing,salam dari Medan Sumatera Utara Indonesia 🇮🇩🇮🇩🇮🇩
The welding directly on the styrofoam was mesmerizing
Fibre glass epoxy coated styrofoam.
@@AM-dn4lk you got me there
The thought process behind adding the hose to the exhaust to keep it cool is genius. Without that it would literally melt the crap out of those craft. The water in the exhaust header is 100% mandatory. Super cool!
I think it likely reduces exhaust noise as well. An ingenious solution to an otherwise difficult issue
could also serve as a fuel pump when it creates suction from running water
I think it is just to cool down the pipes. I believe he has a small pump in the blue oil bottle that he fastened under his seat. Appears to have the gas hose in and out of it. And wires going to it
Not at all. I fly a fiberglass plane with the headers 1/4" from the glass. Fiberglass isn't even discolored.
@@EatPezzzz It's not really about the fiberglass there is foam under it that can't withstand that kind of heat it will start melting from the inside. What happens when all the foam support starts melting?
Genial, enhorabuena un trabajo muy creativo y bien hecho. Disfrutalo¡¡¡¡
There are a lot of tinkerers in Vietnam but historically, these innovators were not allowed to build contraptions.
This is a cultural thing.
I remember when I lived there as a kid back in the early 1970's under democratic government of South Vietnam, there were these two tinkerers who built their own airplane and flew it.
Instead of hiring them to build weapons to fight the war, the government arrested them and threw them in jail, claiming that they were Communists.
I am glad that today's Vietnam allows guys like this to build things and inspire people to innovate.
Amazing. One of the most enjoyable builds I have ever seen on UA-cam...period!
Here is a guy with limited resources available and yet builds
an innovative boat with a great mindset and skill full credit to you
well done mate 🤗 amazing Loco!
Incredible!.....Much respect!....thank you for sharing your skills and fun!
the level of imagination and ingenuity is off the charts. this young man can probably imagine just about anything. he cut the handlebars off his bicycle to make a throttle and rudder control FFS.
Olá, boa tarde! Parabéns pelo seu projeto e a sua execução. Ficou muito legal. Saudações do Brasil.
Brasil ? Onde fica isso ?
@@mais1dos7bilhoesnessemundo40 Ao sul de lugar nenhum.
Fica em baixo da Inglaterra não?
@@mais1dos7bilhoesnessemundo40 Um pouco abaixo do lugar de onde você saiu!
@@cliveowen473 Está certo em parte. Fica um pouco abaixo do lugar de onde você saiu!
Genial. Parabéns. Incrível essa sua "nave" aquática não faz aquela "crista" na traseira. Saudações São Paulo - Brasil.😃
Seriously your invenlooks better and so much more fun than anything you can buy straight off the shelf.
You are an extremely talented individual and I hope someone picks up on that and pays you what you are truly worth for your time and ideas.
Outstanding use of everyday items to make this boat! BRAVO!!
Muito bom. Inspirador!
Великолепно 🙏🏿
С новым годом 🥳
На одном дыхании посмотрел😁
Держать так 👍🏿 ребята
От души
is this Vietnamese ..they are genius to make anything at home...and their girls are most beautiful
Ta daaaaa!! Ladies and gentlemen your future bill gates, jeff bezos of water sports!! Im impressed!! Nice work and video!! Best of luck 👍
Parabéns, ficou excelente!!!
This is awesome! Makes me want to build myself one! Worth every penny!
Anh đăng ký sở hữu trí tuệ cho những sản phẩm này đi. Những nhà đầu tư lớn sẽ tìm tới anh để phát triển.
Anh thật tài năng!
Amazing boat design watching from Russia
Super 👍 serdeczności dla Ciebie I Widzów z Polski 🖐
Amazing work 👍
Thank you very much!
You basically just shaped a surfboard and stuck a motor on it. I would be great to see you make a stand up version. Great job my friend
If I had enough money to buy him a shop,with out hurting my bills, I'd totally do it💪💯Good job Champ
Ótima ideia. Muito bom mesmo. Parabéns 👏👏👏
You definitely have skills. I need something similar to this for fishing the mud flat's at low tide where I live. You gave me some ideas on building my next boat.
Вьетнамцы красавцы! столько трудолюбия в людях)
Keep ur yachts and fancy la-la boats...this is all ya need..I'll take a 2 seater 👍👍👍
Parabéns, um protótipo simples com um tremendo rendimento, muito estável e alcança boa velocidade.
Ótimo trabalho, muita criatividade e capricho.
Abraços do Brasil!
ua-cam.com/video/o_Q6LrdjQaM/v-deo.html
Para que mangueira de agua no escape?
@@riderbass6296 para amenizar os gases da combustão não nao deixar o scap muito quente a ponto de derreter a prancha
Muito bom! meus parabéns!!
*Congratulations !!!*
*Felicitaciones !!!*
😊👍👍
Styrofoam, Krazy Glue, fiberglass , stick welder and an old bike = Hydroplane
Awesome!!
Ficou top dê mais meu amigo... parabéns 👏👏
Amazing construction process. Concerns about hitting a wave or boat wake with those side wings and how hard they are going to dig in is there. The inverted nose like a surf board should defuse decent wake head on as surfers encounter. Not for us arm chair quarterbacks to worry about but hey we can all have things to say about something we didn’t actually build. Kudos to the creation.
I thought the same about the wings, should have carbon fibre rods or just wood spars going between the wings for strength but either way this thing is amazing
There you go again! with that negativity man, a stealer of mojo is mofo!
Wonderful people with frugality on their mind. RESPECT frorever!
I like it, and the Van Guard V-twin engine sounds awesome, too! I'd want a bigger gas tank though, if it was mine, and a visible gas gague, because i wouldn't want to run out of gas out on a huge lake. The way my luck goes, there wouldn't be anyone around out there to tow me back home, or to help me get some more gas.
I have to say that this is one of the most invigorating videos I've seen to date. I am a fisherman from way back and also make my own lures. I can't afford to buy a boat although I love fishing on the water. This has given me the idea that it may be possible to create my own water-worthy craft to enjoy. Do you have any plans that will allow me to try to construct something like this? You are awesome. Thank you for the video.
the internet is full of plans. why dont you google it?
Great build! You have my respect!
Greetings from Brazil.
Việt nam toàn nhân tài chế đồ.
What's better than seeing a person fulfill a dream that amazes us?
This is one of the best videos I have watched on UA-cam. I have done projects like this and it is amazing how much work and money go in them. How durable is it? I was thinking that your drive shaft needed bearings as well. Thanks for the video.
Excelente a sua nave.👍👍👍
quá hay ! con thuyền thực sự là một tác phẩm
You are the proof that you don't need just money, you can achieve what you want with will to work and effort
I love the concept and the fun you can have on something like this in your country. Here in the United States this little beauty would never be USCG approved for U.S. waterways as there aren't any USCG approved carburation on the engine and other required safety requirements but still, it looks cool and I love watching your videos. Great job and keep making fun stuff for us to see.
I spent 7 weeks living in Vietnam. The freedom I had was intoxicating. It felt like nothing was illegal compared to the US. Although, that's not always a good thing. Pollution really sucks there.
thanks inspector! Nice USCG flagstate survey on a non flagstate homebuilt not even close to U.S. waters :')
youre a nerd dude
Back Fire Flame Arrestor
One approved device on each carburetor of all gasoline engines installed after April 25, 1940, except for outboard motors. This regulation applies to all recreational boats.
Yep, regulations are great for wrecking fun
Verdadeiro gênio 🌟🙏👏👏👏
AEH BR, o cara é foda deu vontade de fazer tbm
Well done & keep using your kidneys power.😊
Best of Luck & good wishes.
Nice, those wings catches water and slow the most down!
Love the the craft!!!!
Amazing that’s a surfboard boat ❤️!!!
Thank you very much!
That was my first thought that this guy motorized a surf board. He did some quick engineering to make it work. Without all the bs regulations he’ll be able to fine tune it and other designs. I see him building water toys for the rich and famous some day.
ficou muito bom , parabéns.
Ini kalau di buat cabang olahraga nya bagus ini..... Nanti kan pesawat boatnya bisa di desain lebih bagus lagi.... Sehingga nanti mesin didepan pesawat boat bisa tertutup dengan desain yg lebih cantik dan baru..... Hebatt 👍👍👍👍