How does it look at the bottom, the routing. I want to make mine like that but don't want it too loud. I dont want to get pulled over and want to pass emissions with eas. Its a daily driver.
For the Flowmaster DBX when u search up online it says it’s a muffler. But I see that in the clips both guys have no mufflers or the flowmaster in that area. So does that mean that the flowmaster goes where the stock resonator would go ?
Yessir so essentially, you 1st take off your stock mufflers, then you take off your resonator and put the DBX where the resonator was. It is slightly confusing, but it sounds good 😂
I just want something obnoxiously loud. Any suggestions on a setup? I was thinking catless dp straight pipe and blast pipes. Will that do it for me? I have a 2020 civic sport 2.0na
Bro, so sorry to message you this late!! I just added a catted downpipe and with the exhaust setup I have on now its pretty ridiculous lol It got a lot more loud, and the pops are crazy given we haven't tune it to make pops. After work today I'm gonna try and film a video of it to upload, so hopefully it will help!
not sure if you check your comments still but i have a 2016 honda civic lx and i’ve started messing with some stuff too. I did chrome deletes on the windows i changed the tail lights to smoked ones and i added turn signal break lights on the rear bumper also changed the side marker to a smoked led one and i have a cold air intake coming today. Aside from needing to tint the windows i have to get new rims. Any suggestions on good rims for a black civic like yours?
Yooo sorry to message back so late! Sounds like a sweet build man! Check out fitment industries, I suggest getting 18in wheels. My wheels are Avid1 av20 18x8.5 on 235 width tires. They felt a little heavier so I probably wouldn't go wider on width of wheels/tires if you wanna keep the steering light. I hear a brand called Apex wheels is having a sale and they're a good brand. Haven't had any issues with Avid1 yet, they've been pretty solid, I hear JNC wheels are pretty good too!
Yeah, same here. I have 2017 Civic LX 2.0l NA with k&n cold air intake; vibrate resonator (not the quiet model); 40 or 44 series FlowMasters muffler with 2.5” inlet to 3” outlet Single Weld Exhaust Tip. It has a lower tone and sound good. Hopefully to get a Catted RV6 downpipe.
I'm definitely keeping mine stock
12:24 is definitely the best one on here.. the rest are rice AF. Anyone got some nice sounding 11gens?
My remark exhaust 11th gen 💯
thanks for putting this together! helps me with what direction I want to go with my fe2
Hell yeah! That's what I was hoping the video would do!
Idc what nobody says this car got some spirit in it
Hell yeah it does!!🙌
Thanks for letting me be a part of this man. Much love
No thank you bro!! I still gotta get better at editing, but I appreciate all the support!!🙏🙏
Sounds say better with the resonator good choice
8:41 my fav
"has the k2c20 engine innit" lol
Yeah I always ruin it lol #k20c2
Awesome video bro 🔥 love ur content
Thanks so much man!!!!
How does it look at the bottom, the routing. I want to make mine like that but don't want it too loud. I dont want to get pulled over and want to pass emissions with eas. Its a daily driver.
For the Flowmaster DBX when u search up online it says it’s a muffler. But I see that in the clips both guys have no mufflers or the flowmaster in that area. So does that mean that the flowmaster goes where the stock resonator would go ?
Yessir so essentially, you 1st take off your stock mufflers, then you take off your resonator and put the DBX where the resonator was. It is slightly confusing, but it sounds good 😂
bro i never seen an ex-l build bro its hard tryna build my car
I swear bro 🤣
Daaamn, that first whip tho 👀
Goat 🐐
What other exhaust are available for that engine?
Yooo these setups are nice asl
I just want something obnoxiously loud. Any suggestions on a setup? I was thinking catless dp straight pipe and blast pipes. Will that do it for me? I have a 2020 civic sport 2.0na
Bro, so sorry to message you this late!! I just added a catted downpipe and with the exhaust setup I have on now its pretty ridiculous lol It got a lot more loud, and the pops are crazy given we haven't tune it to make pops. After work today I'm gonna try and film a video of it to upload, so hopefully it will help!
not sure if you check your comments still but i have a 2016 honda civic lx and i’ve started messing with some stuff too. I did chrome deletes on the windows i changed the tail lights to smoked ones and i added turn signal break lights on the rear bumper also changed the side marker to a smoked led one and i have a cold air intake coming today. Aside from needing to tint the windows i have to get new rims. Any suggestions on good rims for a black civic like yours?
Yooo sorry to message back so late! Sounds like a sweet build man! Check out fitment industries, I suggest getting 18in wheels. My wheels are Avid1 av20 18x8.5 on 235 width tires. They felt a little heavier so I probably wouldn't go wider on width of wheels/tires if you wanna keep the steering light. I hear a brand called Apex wheels is having a sale and they're a good brand. Haven't had any issues with Avid1 yet, they've been pretty solid, I hear JNC wheels are pretty good too!
@@HighLinePrestige appreciate it!
I’d love the flow master dbx but it sounds a little too raspy for me :/ tryna get a more smooth and lower tone
Yeah, same here. I have 2017 Civic LX 2.0l NA with k&n cold air intake; vibrate resonator (not the quiet model); 40 or 44 series FlowMasters muffler with 2.5” inlet to 3” outlet Single Weld Exhaust Tip. It has a lower tone and sound good. Hopefully to get a Catted RV6 downpipe.
Where to get the ktuner for the k20c2?
Rv6
Nah who is tha at 3:49 what lights are thoooose?????
How did he burn out 😭
Right!
what kind of tail lights are does
Yo sorry to message back late, those are stock tail lights but I got the reverse lights tinted👍
“k2c20” ☠️
all these base models lmao...the absolute worst when a base model is rocking a shitty type-r replica wing
😴