the amount of people i saw complaining abt this guy on amazon was ridiculous. there were these parents that were upset bc they gave it to their kids to play with and it broke🤣🤣
A Big mistake I see people make with this model kit is them not fully putting in the elbow because see how the elbow on yours is a little farther out maybe take the bicep apart and realign it so that way the arm attaches better
Put glue on the upper arm joint then put a piece of a napkin and that should make the joint tighter I do that with my action figures when they’re going to lose
By the way, that little tab on the clear helmet piece is in the 1995 Toy Story film, watch the beginning scene where you see buzz and woody talking on Andy’s bed..
Its actually in every film! You have to look close at Buzz in em. You can see em though. Ts3 & 4 are harder to see though. You can see it when Buzz is on the Carnival wall barely and A few scenes barely in ts3. Its more noticeable in Ts2 out of all of em
Hi, I bought Mattel Andys room set of 7 Toy Story figures. I just thought they would be a bit smaller and in better scale with the Revoltech Woody and Buzz (6inch). When I put Revoltech woody and buzz to Mattel, they are very small to Rex, Hamm and Slinky. Which Woody and Buzz would you recommend in a scale of around 7-9 inches for the Mattel set of 7 figures? So that it fits Rex, Slinky and other toys in terms of size and scale. Thank you very much :)
Hi 👋 if your looking for buzz and woody figs that’s around 7-9 inches tall you can check out the beast kingdom and spotlight series Buzz d8h beast kingdom ua-cam.com/video/mAj8GCzuKjo/v-deo.htmlsi=pMo5vdvFhVh5z_sr Buzz spotlight series ua-cam.com/video/94zEnM-gclk/v-deo.htmlsi=yk-T3Jmvt7-kdyNd Woody d8h beast kingdom ua-cam.com/video/P0B4dZtxkxQ/v-deo.htmlsi=pS4Wty-SfQWNfTAe Woody spot light series ua-cam.com/video/TzBA-sobXDc/v-deo.htmlsi=dReEJxk9fFM94TQu
I would lean more towards beast kingdom because it’s more sturdy, easier to handle and pose, the cinema rise the parts keeps coming off, some joints are loose, and its also smaller, it looks nice but i would prefer beast kingdom
I would also say beast kingdom over the model kit as well. I have both the beast kingdom and model kit versions of buzz my only wish was that the beast kingdoms faces were as good as the model kit tbh
awww im sorry for that, yeah this action figure is a little bit on the delicate side , the arms on our buzz easily falls off, its a little tricky to pose him. Your buzz lightyear has battle damage hehe its, battle tested!!
A few things look like it would benefit from some super glue, if I get these kits I’m gonna probably glue the eyes facing forward because I don’t like how easy it is to get him cross eyed.
I was thinking of glue as well with the loose joints and stuff, but i like keeping my action figure the way it is, just like how how other collectors custom paint there figs, i like to keep it original,, it’s just quite annoying it falls off
try adjusting the jet pack , sometimes when you assembled it and squeeze a little hard it jams the wings, also check the springs, basically take it apart and put it together with less force
i think its assembled to tight thats why its only moving a little bit try taking it apart then when you assemble it dont put it together to tight , also try to put a gap just to check if that is the main cause of the problem
Do you ever get any plastic burs on parts when you cut them off? I’m looking at buying this kit but I’m worried about burs or cut marks on the pieces when I cut them off.
The paint chips and malfunctions on BOTH of my BANDAI spirits Soul of Chogokin Buzz Lightyear diecast metal action figures is a punishment from BANDAI, both for spending that amount of money on the figures in the first place but also for not getting this figure instead I will get this figure, I have always wanted this figure but because he’s diecast metal, Chogokin is undeniably higher quality, I was going to say better quality, this is true but it’s quite a nasty, unnecessary thing to say However that doesn’t take away the fact that I believe that Chogokin may say diecast metal action figure but it’s very delicate and more like an articulated statue
whoa ive been looking for a diecast buzz lightyear, its so hard to find probably because plastic is cheaper to make, i wouldnt mind paying a little bit more for diecast, its just unfortunate you had issues with yours, how much did you pay for yours? i wonder if they updated it and made it better.
whoaaa thats a good amount, have you seen the gong studious lightyear?? its also diecast and the videos ive seen looks goood, im really thinking of getting that one, but its around $300 its heavy on the pocket
![[Build] Buzz Lightyear｜Speed Building｜ASMR ｜4K](http://i.ytimg.com/vi/vV9QfhJ3MsQ/mqdefault.jpg)
![[Sonokong] Disney&PIXAR "LIGHTYEAR" Figure Unboxing [손오공] 버즈 라이트이어 피규어 언박싱](/img/n.gif)
He's a pretty great kit. I've bought 2, built 1. Planning to do a glow in the dark version of his green parts on my second copy.
nice!! if you make a glow in the dark version, that would be like a special edition , thats awesome
that's awesome. you should totally post pictures of the final product. I bet its gonna look sweet
the amount of people i saw complaining abt this guy on amazon was ridiculous. there were these parents that were upset bc they gave it to their kids to play with and it broke🤣🤣
😆 definitely not for playing, even i had a little bit of issue just trying to pose them. Not recommended for youngsters
A Big mistake I see people make with this model kit is them not fully putting in the elbow because see how the elbow on yours is a little farther out maybe take the bicep apart and realign it so that way the arm attaches better
Thank you for the heads up
Put glue on the upper arm joint then put a piece of a napkin and that should make the joint tighter I do that with my action figures when they’re going to lose
thats a good idea! thanks for the tip
@@collectorsunite1 no problem you actually responded well tell me if it works!
@@collectorsunite1 and by joint i ment peg
By the way, that little tab on the clear helmet piece is in the 1995 Toy Story film, watch the beginning scene where you see buzz and woody talking on Andy’s bed..
you are correct! the first 15 mins of the movie he has that little tab on his dome helmet! good eye!
Its actually in every film! You have to look close at Buzz in em. You can see em though. Ts3 & 4 are harder to see though. You can see it when Buzz is on the Carnival wall barely and A few scenes barely in ts3.
Its more noticeable in Ts2 out of all of em
Hi, I bought Mattel Andys room set of 7 Toy Story figures. I just thought they would be a bit smaller and in better scale with the Revoltech Woody and Buzz (6inch). When I put Revoltech woody and buzz to Mattel, they are very small to Rex, Hamm and Slinky. Which Woody and Buzz would you recommend in a scale of around 7-9 inches for the Mattel set of 7 figures? So that it fits Rex, Slinky and other toys in terms of size and scale. Thank you very much :)
Hi 👋 if your looking for buzz and woody figs that’s around 7-9 inches tall you can check out the beast kingdom and spotlight series
Buzz d8h beast kingdom ua-cam.com/video/mAj8GCzuKjo/v-deo.htmlsi=pMo5vdvFhVh5z_sr
Buzz spotlight series ua-cam.com/video/94zEnM-gclk/v-deo.htmlsi=yk-T3Jmvt7-kdyNd
Woody d8h beast kingdom ua-cam.com/video/P0B4dZtxkxQ/v-deo.htmlsi=pS4Wty-SfQWNfTAe
Woody spot light series ua-cam.com/video/TzBA-sobXDc/v-deo.htmlsi=dReEJxk9fFM94TQu
Which do you prefer? This Bandai model kit or the Beast Kingdom Buzz Lightyear?
I would lean more towards beast kingdom because it’s more sturdy, easier to handle and pose, the cinema rise the parts keeps coming off, some joints are loose, and its also smaller, it looks nice but i would prefer beast kingdom
I would also say beast kingdom over the model kit as well. I have both the beast kingdom and model kit versions of buzz my only wish was that the beast kingdoms faces were as good as the model kit tbh
For a second there I thought you broke his thumb 😅
loloz ,but i have broken one before, my dynamic action hero woody
i got it now🎉🎉
Nice!!! Have you assembled it yet? Awesome pick up
@ i did its a great deal except my wings dont work right they do pop out but the other ones on both wings that pop out on the side dont come out
yeah, mine does that too , loosen it up a little bit , thats what i did with mines and the wings pop out now, i mustve pushed the jet pack too hard
I had a great time with this guy however when I was playing with it I broke it because the black center part will break if placed upsidown
Oh no, were you able to fix it? Like glue it back?
@@collectorsunite1 I was however the glue got into the wing mechanism so the wings started to stop working and it was very easy to break again
awww im sorry for that, yeah this action figure is a little bit on the delicate side , the arms on our buzz easily falls off, its a little tricky to pose him. Your buzz lightyear has battle damage hehe its, battle tested!!
How come people don’t see the purple tips on the hand
How Did you open the helmet without breaking it?
Hi guys, I didnt press it down all the way so theres a little wiggle room to take it off.
They didn’t add the handle thing on the helmet because if you look closely at buzz in the first toy story movie you can see the handle
Good eye 👁, we would’ve preferred it to be rounded, but yeah we see the handle on toy story 1
A few things look like it would benefit from some super glue, if I get these kits I’m gonna probably glue the eyes facing forward because I don’t like how easy it is to get him cross eyed.
I was thinking of glue as well with the loose joints and stuff, but i like keeping my action figure the way it is, just like how how other collectors custom paint there figs, i like to keep it original,, it’s just quite annoying it falls off
My son haves that but the wings don't work
try adjusting the jet pack , sometimes when you assembled it and squeeze a little hard it jams the wings, also check the springs, basically take it apart and put it together with less force
He Checked The springs and its in the right way
does the wings pop out at all? or move? when pressing the button?
Only little bit.
i think its assembled to tight thats why its only moving a little bit try taking it apart then when you assemble it dont put it together to tight , also try to put a gap just to check if that is the main cause of the problem
since his arms can come off, with the hat and the apron you can recreate miss nesbitt.
ye
That’s right, good idea 💡 borrow some apron and a hat 👒 boom ! Arms comes off anyways
Isn't easily removable arms canon? XD
could be good idea
nice buzz lightyear
Thank you!! Are you guys excited for the new lightyear movie coming out
Do you ever get any plastic burs on parts when you cut them off?
I’m looking at buying this kit but I’m worried about burs or cut marks on the pieces when I cut them off.
good question! yes you get the imperfections flashes burrs etc, you can try to smooth it out with like a nail file.
jajajaja la matriz neo la cagada :V buen video mano +1
Matrix neo 😂 , he’s the one
The paint chips and malfunctions on BOTH of my BANDAI spirits Soul of Chogokin Buzz Lightyear diecast metal action figures is a punishment from BANDAI, both for spending that amount of money on the figures in the first place but also for not getting this figure instead
I will get this figure, I have always wanted this figure but because he’s diecast metal, Chogokin is undeniably higher quality, I was going to say better quality, this is true but it’s quite a nasty, unnecessary thing to say
However that doesn’t take away the fact that I believe that Chogokin may say diecast metal action figure but it’s very delicate and more like an articulated statue
whoa ive been looking for a diecast buzz lightyear, its so hard to find probably because plastic is cheaper to make, i wouldnt mind paying a little bit more for diecast, its just unfortunate you had issues with yours, how much did you pay for yours? i wonder if they updated it and made it better.
@@collectorsunite1 I payed £340 for first one, and it was nearly £400 for the second because they Whacked a nearly £80 quid surcharge on it
whoaaa thats a good amount, have you seen the gong studious lightyear?? its also diecast and the videos ive seen looks goood, im really thinking of getting that one, but its around $300 its heavy on the pocket
does karate chop action work???
Hi 👋, no, it doesn’t have a karate chop feature. That would’ve been nice
Beast kindom cuzz i have it 😂😂😂😂
nice you got an awesome buzz!!!!! d8h beast kingdom for the price and build quality is a must buy! cant wait for the lightyear version!! whoohoo
Where you buy
This one we bought online amzn.to/3CnNhAC
Mándame ese Buzz Lightyear por favor
Porfa
buzz lightyear magnificent