I love this video so much.. very easy to follow. If you wanted to add personalized names & such.. at what point would you do that or is it best not to?
some of them are custom fabric groups like Ohana Fabric, Oh So Pretty, and Kammie Lou Lou custom fabrics. They do preorder sales. Easiest way to see what they have is to join the facebook groups. They will let you know when preorders or retail is available. I saw a lot of my favorite fabrics here!
I went to the website you ordered the fabric from and I was wondering how much fabric does it take for one tumbler. I noticed you could get it in yards and FH size. Your cups are amazing. And would love to see how your husband made the tumbler turner.
Great video, I wondered how the cups were done with fabric, super job..where did you purchase the material? Also I would love to see a tutorial on the cup turner. Thanks for sharing..
Most of the material is linked in the description (other than the fabric, just search for Cotton Lycra). Here is a link to the tumbler video - ua-cam.com/video/woplnGRaOh8/v-deo.html
After you sprinkled the glitter you don’t need another layer of epoxy? Or does it depend on how it feels afterwords? You make it look soooo easy! Thanks for sharing!
How do you keep the tumbler from sticking to the pool noodle when it set up? Also how to keep the top edge smooth (the horizontal edge when tumbler is sitting upright)
Just wondering as I am new to this, is it smooth in the end after adding the glitter as the last step? or can you feel the glitter? Genuinely just curious as I am just starting out doing research and learning.
I just stumbled on your site!!! Thank you for sharing your tumblers!!! Your instructions are nice and simple!!! You took the fear away for me!!! Thank you!!!
Can I ask why u poured out so much epoxy and not used all of it? Did u do some other cups other than the one featured in the video? If not isn’t that a waste of epoxy then? Btw loved video and just subscribed
Girl....please don’t tell these poor people to mix for 60seconds. Majority of epoxy companies list their mixing requirements on the bottles and the 4 different kinds I’ve used have consistently listed recommendations of mixing 3+ minutes. I mix 3 minutes the 1 minute extra per 10ml. Typically 6-7 minutes total! Mix until the epoxy starts to heat up and then it’s ready. Please please don’t instruct people incorrectly because if they mix for 60 seconds and end up with a tacky cup that won’t cure they will want to quit this hobby. They need accurate guidance, it’s just as important to teach about the epoxy itself as it is to teach about how you get a cute design. Just saying.
This is an awesome tutorial, however epoxy emits a toxic chemical when mixed....you and everyone who works with it really should be using an epoxy mask when using it.
Love the colors of your fabric and. You make it so easy. Thanks
Thank You for sharing this beautiful pattern with me I’m gonna try this 🌹🌹🌹🌹🌹🌹
You did a great job!! I am looking forward to staying tuned to your videos
That is one hell of a cup turner!🔥
I enjoyed watching
I would like to see more videos like this one!
Beautiful.
Oh my goodness these are cute. I need a few made out of some fabric I have if you could do that. Would be awsome.
Thanks so much for posting I been looking for a video I could follow and this is it! :)
👍
Very beautiful 😍
Wonderful creativity can’t wait to try 🌻
Good luck! Let me know if you have any questions.
Thanks so much I appreciate that so much, looking forward to more videos 🌻
Great job
Very very very nice!! Great tutorial!! How did u measure the amount of fabric u would need for the cup?
This is nice really nice ...i like thanks so much
I love this video so much.. very easy to follow.
If you wanted to add personalized names & such.. at what point would you do that or is it best not to?
After mod before epoxy.
Love the video.
Thanks
You do awesome work. Can u tell me where i can find those fabrics. I'm a newbie and would love to try my hand at that for presents for the kids
some of them are custom fabric groups like Ohana Fabric, Oh So Pretty, and Kammie Lou Lou custom fabrics. They do preorder sales. Easiest way to see what they have is to join the facebook groups. They will let you know when preorders or retail is available. I saw a lot of my favorite fabrics here!
I went to the website you ordered the fabric from and I was wondering how much fabric does it take for one tumbler. I noticed you could get it in yards and FH size. Your cups are amazing. And would love to see how your husband made the tumbler turner.
Hello. My daughter and I are looking ro start up something like rhis and would love more info on where ro get fabric at.
Great video, I wondered how the cups were done with fabric, super job..where did you purchase the material? Also I would love to see a tutorial on the cup turner. Thanks for sharing..
Most of the material is linked in the description (other than the fabric, just search for Cotton Lycra). Here is a link to the tumbler video - ua-cam.com/video/woplnGRaOh8/v-deo.html
Beautiful and interesting.
Can you do drips or stickers before epoxy??
This is beautiful!!!!
Thanks
Where did you gwt uour fabrics that allow resale? Most around me state not for commercial or profit use
How did hubby make arms for your turner?? My hubby made my turner but need to make arms and what kind of sponge or foam did you use
Great job! So neat and clean! Love the fabric!
These are all absolutely beautiful! I love e that harry potter one!
Hi what kind of fabric did you say you use. It was hard to make out in the video "Cotton ....? The only kind that stretches".
Cotton Lycra
Absolute amazing! Did you put another coat of epoxy after the glitter?
Usually it is not needed when it’s a very small amount like she did. The glitter will just dry into the epoxy
how long does it take to get the fabric because they say pre order??
Where did you get the Eeyore fabric? I can't find anything like it.
Absolutely love these!!! Where do you get your fabric? 💖💖💖💖
wondering the same!
Yes please let us know where you get your fabric...I'm looking for Rugrats design
I was wondering as well where u get your fabric
What size fabric do you need to make this?
Can you use Acrylic cups for the fabric cups?
Do you put another layer of epoxy after putting glitter on the cup?
That’s a beautiful fabric where do they sell it at ?
I was wondering if I could do this method using the the Starbucks frosted cold cup?
I’m not sure 🤔
After you sprinkled the glitter you don’t need another layer of epoxy? Or does it depend on how it feels afterwords? You make it look soooo easy! Thanks for sharing!
It depends on how it feels. If you put the glitter on immediately after it typically doesn’t need another coat.
Do you sand your tumbler before applying fabric?
Do you take the mod poge off the silver rim?
what did you apply to the fabric before the epoxy please , how do you spell it ?
So I'm a beginner what is the best fabric to use
How do you keep the tumbler from sticking to the pool noodle when it set up? Also how to keep the top edge smooth (the horizontal edge when tumbler is sitting upright)
You’re video was very helpful. What size do you put your fabric to?
What do you mean what size?
Do you clean the mod podge off the rim before you epoxy?
Love! I’m About to make some for my boys. How long between mod podge layers do you wait? Thanks!!
Like 10 minutes
Very cute cups, can I ask what glitters you use for your tumblers? I love the teal glitter you used.
Check the description.
very unhelpful reply from creator. glitters are not listed in description and link to website is broken
These tumblers look great... Where can I get cotton micra fabric?
sophieraefabric.com
I’ve seen people use non stretch fabric have you done without stretch
Nope, just stretch.
@@MakersLane thank you. I've watched many videos yours was the best. very informative.
Can you do this to the plastic cup Ex. Starbucks cold cups
How long do you between coats of Mod Podge?
How do you keep your fabric from changing colors. Mines got darker
Where did u get these fabrics? They are beautiful!
Just wondering as I am new to this, is it smooth in the end after adding the glitter as the last step? or can you feel the glitter? Genuinely just curious as I am just starting out doing research and learning.
It really depends, sometimes it will need another coat. You just have to do a couple to figure it out.
@@MakersLane what size fabric would I need for a 20oz tumbler?
Your cups are AMAZING!!! Where do you get your fabric from?
You should do a peakaboo cup with fabric and spray paint
I would like to know how to make that tumbler turner that you have
I have a video on my UA-cam channel
Can you put to much midge podge on
Love these cups! Great tutorial. Can you share where you get your fabric from?
sophierae-custom-fabrics.myshopify.com/
I just stumbled on your site!!! Thank you for sharing your tumblers!!! Your instructions are nice and simple!!! You took the fear away for me!!! Thank you!!!
I love Disney, etc and have a shop but how do you so it with all the Copyrighted products?
Cool video...
Glad you enjoyed it
Those are Awesome! Where do you get your fabric?
sophieraefabric.com
Where do you find your cotton Lycra fabric??
facebook.com/groups/sophieraefabric/?ref=share
Where did u get the Harry Potter fabric?
What is the material called and where do you get it from ?
It is cotton lycra and you can find it all over
Where do you buy your fabric from? Also out of everyone I’ve watched you explain it the best! You’re very detailed with it!
A lot of it she makes, but just look up Facebook fabric groups.
She makes her fabric??
Amazing tutorial. Did you app more epoxy after the glitter or no?
Sometimes, it depends on whether or not I can feel it after it has dried.
I love it beautiful my first time to you're UA-cam. Were do you get the fabric from? ( TIA )
sophieraefabric.com
What can we use if we don’t have a cup turner for the Epoxy. Just starting & I don’t want to spend the money on a turner for my first try.
I have a video on a diy cup turner.
Do you sand the cups before
Nope no sanding
Can I ask why u poured out so much epoxy and not used all of it? Did u do some other cups other than the one featured in the video? If not isn’t that a waste of epoxy then? Btw loved video and just subscribed
Does the epoxy ever get on the inside lip of the cup. If so what do you then?
You can remove epoxy while it’s wet with alcohol and a paper towel
Where can I get the fabric from
What is the name of that stretchy type of fabric again?
Cotton Lycra
What is the size of the fabric for the 20oz cup?
Small print, tumbler cut.
Best place to buy tumblers?
Do you have to use epoxy? Can you just use the mod podge?
Well the epoxy seals the cup. If you get the mod podge wet it gets cloudy and comes apart.
Where do you purchase the fabric.
sophierae-custom-fabrics.myshopify.com/
So after the 12hrs you did not have to do any other coast of epoxy
Typically, yes. Sometimes I have to add another layer if you don’t put enough on. The more you do it the better you get.
did you only coat it once with the epoxy ?
When I first started, no, but now, yes, I only do one coat.
I love the cup! Love the fabric! Love that Multi-Cup Turner!
Please use PPE.
Follow Epoxy Is Not My Friend
It will inform you the dangers of epoxy.
Where do you get your fabric?
sophierae-custom-fabrics.myshopify.com/
Do you not wear a respirator?
Only as needed.
Girl....please don’t tell these poor people to mix for 60seconds. Majority of epoxy companies list their mixing requirements on the bottles and the 4 different kinds I’ve used have consistently listed recommendations of mixing 3+ minutes. I mix 3 minutes the 1 minute extra per 10ml. Typically 6-7 minutes total! Mix until the epoxy starts to heat up and then it’s ready. Please please don’t instruct people incorrectly because if they mix for 60 seconds and end up with a tacky cup that won’t cure they will want to quit this hobby. They need accurate guidance, it’s just as important to teach about the epoxy itself as it is to teach about how you get a cute design. Just saying.
Do you sell these tumblers
thewinkingrose.com/
link leads to nowhere
so you only put one coat of epoxy? and let it turn for 12 hour, wow that's nice
Yes one coat. It may take a couple times before you figure it out.
silicone cups, I'm an idiot! Thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!
This epoxy is not FDA food safe. You should never pour both into the same cup because they do not weigh the same.
99
This is an awesome tutorial, however epoxy emits a toxic chemical when mixed....you and everyone who works with it really should be using an epoxy mask when using it.
You don’t have a mask
Really love this tumbler...keep up the good work & videos!!!
Thank you so much
Do you let the Mod Podge dry fully before each coat?
Yes