You're welcome June - yes it's much cheaper and actually make decent quality panels. Just keep them on the smaller size as they can warp even with bracing on the back. I keep mine to max 50 x 40 cm. Happy painting!
A very useful and practical posting. I have used the PVA when making practice panels which seems to work well. The course I am on is using cheap panels and we have been instructed to use 2-3 coats of gesso to even out the surface and fill in the annoying ‘pot holes’ which reflect light. These can make any photography difficult. The tutor avoids a brush and gesso is applied with an old credit card! This works very well! The price of a linen board 16”x12 is £10 and more if importing oil primed from the USA.
This is great. I have been trying to make canvas panels but couldn't figure out the best way to wrap the canvas and attach it to the back. I'm going to give this a try. I use a wide plastic putty knife to flatten the canvas and get rid of air bubbles - it's a great tool for that job.
You're welcome Tim- and thanks for the putty knife tip 👍 I didn't cover this in the video, but if you want to skip folding the edges over, you can just trim the canvas at the edges so it's flush with the sides- I do this if I'm going to glue the panel to a cradle for support. Just remember to use a really sharp hobby knife blade to get a nice edge 😊
Hope you find this guide useful 😀 I've put a full equipment/ material list in the description. If you have any questions just put them here in the comments and I'll get back to you 👍 **EXTRA TIP: You can also just glue the linen on the panel and cut along the edge instead of folding over the corners** Here's a link to my Plein Air Vlog: ua-cam.com/play/PLzfvVssAGaqBx5rqNiindKghKEBYoUbzt.html
Hi Jon, yeah GAC 100 is expensive! I did look into PVA glue as well but I couldn't find any archival quality acid-free where I live in Denmark. But maybe PVA would work just fine if you could find some acid free stuff 👍
I agree, look for archival or acid-free PVA. From experience, be careful about adding too much water to PVA if you find you need to thin it out as too much water can lead to warping of the hardboard. The good thing about GAC 100 or similar products is that it will not contain water and therefore really minimizes any warping/shrinking issues when applying it.
Thankyou very interesting ,, I’m doing it right now in my shed ,, also for plein air
Great video, Daniel. Thank you very helpful information. And I like the cost-effectiveness of making my own panels.
You're welcome June - yes it's much cheaper and actually make decent quality panels. Just keep them on the smaller size as they can warp even with bracing on the back. I keep mine to max 50 x 40 cm. Happy painting!
This was exactly what I was looking for and super helpful, thank you!
You're welcome Rebecca, just let me know if you have any questions 😀
A very useful and practical posting. I have used the PVA when making practice panels which seems to work well. The course I am on is using cheap panels and we have been instructed to use 2-3 coats of gesso to even out the surface and fill in the annoying ‘pot holes’ which reflect light. These can make any photography difficult. The tutor avoids a brush and gesso is applied with an old credit card! This works very well! The price of a linen board 16”x12 is £10 and more if importing oil primed from the USA.
Thanks for letting us know Ian- good to know PVA can be used for practice pieces. All the best with the course 😊
This is great. I have been trying to make canvas panels but couldn't figure out the best way to wrap the canvas and attach it to the back. I'm going to give this a try. I use a wide plastic putty knife to flatten the canvas and get rid of air bubbles - it's a great tool for that job.
You're welcome Tim- and thanks for the putty knife tip 👍 I didn't cover this in the video, but if you want to skip folding the edges over, you can just trim the canvas at the edges so it's flush with the sides- I do this if I'm going to glue the panel to a cradle for support. Just remember to use a really sharp hobby knife blade to get a nice edge 😊
Great explanation of your process, thank you.
Hope you find this guide useful 😀 I've put a full equipment/ material list in the description. If you have any questions just put them here in the comments and I'll get back to you 👍
**EXTRA TIP: You can also just glue the linen on the panel and cut along the edge instead of folding over the corners**
Here's a link to my Plein Air Vlog:
ua-cam.com/play/PLzfvVssAGaqBx5rqNiindKghKEBYoUbzt.html
Very good! Thanks!!
You're welcome!
Excellent. Have you ever tried an oil based gesso?
@@tbm7187 not yet!
I. Have used GAC 100 and although it is good it is quite expensive to be used as a size, have you considered PVA GLUE.?
.
Hi Jon, yeah GAC 100 is expensive! I did look into PVA glue as well but I couldn't find any archival quality acid-free where I live in Denmark. But maybe PVA would work just fine if you could find some acid free stuff 👍
I agree, look for archival or acid-free PVA. From experience, be careful about adding too much water to PVA if you find you need to thin it out as too much water can lead to warping of the hardboard. The good thing about GAC 100 or similar products is that it will not contain water and therefore really minimizes any warping/shrinking issues when applying it.
PVA, by it's very nature, IS ALL ACID FREE.