В условиях стенда выглядит красиво, а теперь сделайте то-же самое посреди поля, в яме на половину заполненной водой и грязью, во время дождя с сильным ветром, пальцами которые от холода почти не шевелятся.
For all you dumb people and non electrical engineers or electrician, the 3M video some people are stating that has a faster repair is not even the same cable. This one has different shielding, different layers, different thickness. This to me appears to be properly done and went above and beyond to make a resin outer shield.
i can't believe they are not crimping the conductors together with hydraulic hand crimpers.4 bolts on each connection looks like technology from the past.
not sure how I got to this vid but I found a couple of things at 8:33 your not smoothing it your ruffing it and also why would you use a pencil ?? isn't graphite conductive?? and you could end with trace amounts in the insulation?
24kv cellpack, was hoping for an experiment with 6000 lithium ion cells strapped in series in the good name of science. Chapter 3 was long winded, wasn't it? These bolts snap off when proper torque is applied.
All well and good jointing indoor. Try all that when there are pipes ducts and crap in the hole you’re working in. All that room and the cables are not straight and the joint is like a banana.
Congrats F A, you just doomed a very expensive asset to fail to reach its full economical life of 40-50 years. Especially on modern cables water ingress is the worst thing for the insulation and should be absolutely avoided. Before energizing you should also do a sheath test and a VLF test at three times operating voltage.
@@bobbwc7011 if no water comes inside. There won't be an issue. However, you have to consider the environment. For example our trenches (soil) is usually full of water since our country is basically an island. Therefore, Pilc joints live longer than Xlpe joints.
So as someone watching this not knowing what this is for. Is this for energy transfer? Like how you'd splice a cable to carry a current further based off amplification of the energy being transfered? Like and EDFA?
Ya, this is your training video.... Real world -> Oh my gosh someone dug our wire up, get out there and fix it. Here's a shovel and wheelbarrow. We will send a tractor out when you are almost done with the hole. Oh don't forget that it is going to flash flood right about the time you are done digging. Good Luck! Oh just so you know, we had knucklehead from accounting turn off the power so you have nothing to worry about!
I'd been doing this work since 1994 up to 2018 in the Kingdom of Saudi Arabia and having a certificate of LV, MV, HV, and Extra High Voltage certificate 230kv Sud Kabel and 380 kv Nexans cable. How I wish to do again this work in my own country Philippines.
Why im watching this?
😂.I was thinking the same.....😂
i was thinking the same
is it a power line?
@@Thetreetroll no , its for internet
Because its important
if you can't fix something with a tape, it means your not using enough tape
Or simply the wrong tape, there's the right tape for everybody in every situation 😂
55555 5 55 55 55 55 55 5555555555 for 5girls 55 5inches 55 5555inches 5555555 5 5 555inches t5555 555th grade 5 5 555 5AM and 555 5 5 555 5555 5 5555
you're* not your
youtubes video recommendations gets weirder and weirder...
and here I am watching every thing.
yes WHY did i watch the WHOLE thing is what im wondering
Same thing man.
So what shall we watch next?
Well it was kind'a fascinating to watch no? Now you know how to do the job if you ever find yourself in the position.
The robots fuck with us and having a laugh!
I have an exam tomorrow, and this is how I waste my time
if you fail your exams the skills you learn from this video might come in handy on the factory floor. Good luck though, stay in school.
Well how was your exam then? 😂🤗
shit, i though that i am the only one doing that :D
My lady waits while I must finish this video. What's wrong with me?
I have one today, but no one cares =))
I'm satisfied that he has neatly completed the job
Thanks, now I can repair my iPad charger.
You will need more tape
Well said.
That was a lot of tapes :)
This is not a coupling so this is a taping set)
Supper Cable jointing Supper insulating and good finishing
Congratulations
i will never have to do this but now i know how. totally worth the 18 minutes of my life
That joint should last hundreds of years.
Thật sự kính nể bác nào nghĩ ra đc cách làm này!
Vài thế kỷ chắc cũng ko bao giờ bật ra đc mối ghép nối 😱😱😱
В условиях стенда выглядит красиво, а теперь сделайте то-же самое посреди поля, в яме на половину заполненной водой и грязью, во время дождя с сильным ветром, пальцами которые от холода почти не шевелятся.
палатку поставят
I followed the instructions, but now I'm out of tape!
Help, I need more tape!! And it's starting to rain... :-(
Set up a tent👍
For all you dumb people and non electrical engineers or electrician, the 3M video some people are stating that has a faster repair is not even the same cable. This one has different shielding, different layers, different thickness. This to me appears to be properly done and went above and beyond to make a resin outer shield.
At 9:55 he left some of the connector exposed when wrapping the first layer of semiconductor tape over the first splice.
Nice catch.
i guess I should switch over to the A380 landing guide, my change is higher to get into that situation than extending some 24kv cables.
This guy is going to wrap my christmas presents from now on
Yeah..Unfortunately, it might take you up till summer to open up all you presents... :-)
...and then you remember you forgot to put the cover sleeve on first
oh no, dont say it, i have done it too many times with the rubber sleeves when soldering XD
WOW! My arms will be strong after a couple of those jobs!
Store: How much tape do you need?
This cable guy: yes
Very difficult way to make a joint. In my time we just used Rizla.
hahahaahahah :D
This is how I feel when I'm plugging in a few extra devices behind the TV.
That's one helluva sound system hes hooking up LOL😁😁
Very good. Much better than reading the manual
do NOT cut XLPE insolation 7:11 you see a clear cut in it ... GG
i can't believe they are not crimping the conductors together with hydraulic hand crimpers.4 bolts on each connection looks like technology from the past.
Don't know why this was in my view, but it was quite fascinating.
Exactly the video I was looking for... how to splice 24kV cables...
It's called millimeter, not 'MM". And these things you called semiconductors, they are insulators!
THANK YOU
Yea Mate, I was freaking out where he started saying "M M"
not sure how I got to this vid but I found a couple of things at 8:33 your not smoothing it your ruffing it and also why would you use a pencil ?? isn't graphite conductive?? and you could end with trace amounts in the insulation?
what happened with the gloves?
Is this what hooks up to the long and purple rubber thing in my moms drawer?
I was searching for tips to repair the charging cable of my Samsung mobile.....
Now I can do it😆😆😆
Next time I will use this wire for wiring in my house😎
lol
thanks for nice video my
channel starts to grow, it inspired me to make more video
Li ho fatti della 3m ma questo giuntista è troppo bravo ❤
ich frage mich wozu er nun den Helm tragen musste .....?
Отправьте им залетну синею ! Мучаются ребята 😂
very delicate. i think i can do it. where can i do this for fun ?
fantastic work, good job, this is an expensive tuto
Sooopr work. And soopr cable
24kv cellpack, was hoping for an experiment with 6000 lithium ion cells strapped in series in the good name of science. Chapter 3 was long winded, wasn't it? These bolts snap off when proper torque is applied.
It's compatible for my e-bike ?
All well and good jointing indoor. Try all that when there are pipes ducts and crap in the hole you’re working in. All that room and the cables are not straight and the joint is like a banana.
TRÊN CẢ TUYỆT VỜI
We did joints under heavy rain and trench full of water at same time. And energized successfully 😁. It takes skills and experience.
But will it keep working for 20,or 30 or more years?
@@asbestosfiber Depends on the environment first, Jointer skills and finally the Joint quality its self.
Congrats F A, you just doomed a very expensive asset to fail to reach its full economical life of 40-50 years. Especially on modern cables water ingress is the worst thing for the insulation and should be absolutely avoided. Before energizing you should also do a sheath test and a VLF test at three times operating voltage.
@@bobbwc7011 if no water comes inside. There won't be an issue. However, you have to consider the environment. For example our trenches (soil) is usually full of water since our country is basically an island. Therefore, Pilc joints live longer than Xlpe joints.
Does it really said "m m" for milimeters ?
Yes
Если бы была синяя изолента, то ее не нужно было бы так толсто мотать.
сука русские понабежали
WAW..... happy new year 2020 guys ❤️👍🏻👌🏻
great lifehack, now i can charge my phone wherever i am
What about safety glasses?
This dude is PPE to the max. 3:35 where are your cut proof gloves? Hu
Thumbs up for writing Millimeter correctly as „mm“ :-) All other asians do that wrong
So this is what it takes to wire Gulliver's house for electricity.
So as someone watching this not knowing what this is for. Is this for energy transfer? Like how you'd splice a cable to carry a current further based off amplification of the energy being transfered? Like and EDFA?
I have an exam tomorrow, and this is how I waste my time.. exactly like the previous semester..
14:42 Performing CPR, 14:54 now to the beat.
OK thats a lot of work to do before you put cable in the ground..
Can i use ductape instead?
haha funny one
Duct tape has small strands of metal in it.
Only tapes up to 11 mm ?
I love how they tell you that this should be done by a competent person LOL
Сколько стоит метр этого кабеля?
~90 eur
Что ты задумал? xD
@@nikoelias1201 что-то очень страшное!
4:12 Gets the worlds largest comedy scissors out
This is only for mid voltage then what procedure is for hi voltage
ua-cam.com/video/Mab6GTHUbd8/v-deo.html
@@ene80 thanks
thank you so much, very informative video.
Can't you just solder them together and thats it?
Ага, теперь попробуй тоже самое трудно доступном месте. Я посмотрел бы как они там по мучались бы
It called millimeter!
Ya, this is your training video.... Real world -> Oh my gosh someone dug our wire up, get out there and fix it. Here's a shovel and wheelbarrow. We will send a tractor out when you are almost done with the hole. Oh don't forget that it is going to flash flood right about the time you are done digging. Good Luck! Oh just so you know, we had knucklehead from accounting turn off the power so you have nothing to worry about!
عربي يعبر عباب التعليقات. الشكر لمن شاهد وأعطى لايك
What will happen if pencilling is not carried out by properly? Let say by using pen knife and cut of the sharp edge of the insulation
imagine using this whole tape and in 12:15 realise that you forgot to put these copper sleeves.. Shiit
А в конце такой: "Баалииин, термоусадочку забыл!"
или провода перепутал и не так соединил)
I guess he find it easy to say mm than millimetres
I'd been doing this work since 1994 up to 2018 in the Kingdom of Saudi Arabia and having a certificate of LV, MV, HV, and Extra High Voltage certificate 230kv Sud Kabel and 380 kv Nexans cable. How I wish to do again this work in my own country Philippines.
Frank - did we slide over the copper screen sleeve I can't remember?
10:47 That took dam time for sure..
That was sad'' no duct tape!
Please tell me what is this?
👍 Alem de eu não sabe como vim para aqui, ainda assisti todo o vídeo. Kkkkk
Eu vim por causa da quarentena kkkkkk
Why is this in my recommendation
this seems like a very long process and can be prone to mistakes for something that can be easier done
Doesn't look happy the dude...smile!
what about the final result
I thought it was an edited picture in the thumb, small wire with a dude pasted behind it. NOPE BIG OLE CABLE
why actually Shang Tsung working there?
Where can I buy this cable pencil tool?
What a cable joint surgery!
this type of cable how much current can support?
Good Learning Material
Cellpack very nice
Can i Use a VHS Tape?
how did i get here ?
Omg 😮 That’s a big cable !!!
totally irrelevant information feels so gooooood
can i use those cable to solve the drop of packages in cat5 xit cables? where can i buy 1m of those?
dầu hay gì vậy ad
did Liu Kang hurts him so much?
Sehr interessant. Jetzt verstehe ich besser, warum so etwas so lange dauert.
Can I use CP71W (B) instead of plain CP71W?