Broken, old capacitors cause screen flickering and white screen failure. The screen failure of the old phone was repaired in this way. A very useful video.
Thank you very much. I have 2 sets of Panasonic cordless phones with this blank LCD problem, and I managed to fix them using the hint in your video. I did not replace the capacitors because they were tested fine after I removed them from the circuit board. So I soldered them back and it just worked. I am thinking the cause of the blank LCD problem might have been due to moisture or something between the tiny capacitors and the circuit board which affected the capacitance. This might explain why my simply removing the 3 capacitors and soldering them back made it work again.
Good job brother..!! Thank you. This works..!! i had same problem on my panasonic cordless phone KX-TG2531BX. Now it works alright..!! i have two sets in this model. Both had same problem..!! i am happy with this hint which you have given in your video. Thank you again brother.!!
Open the lid remove batteries remove the back case and heat the board around the display with a hairdryer for 2 minutes wait to cool and put back the batteries and check it works 100% no need to remove capacitors just heat the area it's very easy try it
Hi After removing every capacitor, If it was the wrong one, you connect it again? Is it necessary that for the faulty capacitor, it is connected again?
I had two handsets. Replacing the 4 SMD Caps in one of them worked. In another it did not. Cross-checked soldering etc and pretty sure not my error...but obviously could have been. Capacitors used were 0.47 0609.
I have the same handset KX-TGA931T Remove 1 cap, put battery, display blank, resolder the cap Repeat for next 4 caps, but display still blank... What are the values for each of the caps?
Broken, old capacitors cause screen flickering and white screen failure. The screen failure of the old phone was repaired in this way. A very useful video.
Thank you very much. I have 2 sets of Panasonic cordless phones with this blank LCD problem, and I managed to fix them using the hint in your video. I did not replace the capacitors because they were tested fine after I removed them from the circuit board. So I soldered them back and it just worked. I am thinking the cause of the blank LCD problem might have been due to moisture or something between the tiny capacitors and the circuit board which affected the capacitance. This might explain why my simply removing the 3 capacitors and soldering them back made it work again.
Tanq brother
Eric please guide me. I have same problem with my 4 phones
Model is Panasonic KX-TGA101S
I just used hair dryer and inflicted hot streaming air on board from the back after removing batteries only. It works like magic.
Thanks dear. It works.Fixed display problem for my Panasonic cordless handset.
Welcome 👍
Thanks for your teaching! Even I don't know what you are talking about!
Good job brother..!! Thank you. This works..!! i had same problem on my panasonic cordless phone KX-TG2531BX. Now it works alright..!! i have two sets in this model. Both had same problem..!! i am happy with this hint which you have given in your video. Thank you again brother.!!
Tanq brother
Hi Pls do you know any display solution for this model
KX-TGA641E?
Open the lid remove batteries remove the back case and heat the board around the display with a hairdryer for 2 minutes wait to cool and put back the batteries and check it works 100% no need to remove capacitors just heat the area it's very easy try it
tanq information
It works! Thanks man.
Enjoy
I have 1 set...same display problem...how much u charge for repair?😊
300
Hi
After removing every capacitor, If it was the wrong one, you connect it again? Is it necessary that for the faulty capacitor, it is connected again?
I did not change anything. I just warmed up the phone bord by hair dryer,. Magik happened. Until now, everything has worked fine.
Y2020, i have same problem too. I just wondering that why i have to remove the capacitor. what is the problem with capacitor?
I had two handsets. Replacing the 4 SMD Caps in one of them worked. In another it did not. Cross-checked soldering etc and pretty sure not my error...but obviously could have been. Capacitors used were 0.47 0609.
Hi how about panasonic kx-tg3531bx cordless display repair?
Why cut the wire of speaker it can be detached by removing that white cover
how about KX-TGA277HM it has the same problem.
Value of these capacitors...?
Is new cap.use or only remove
just remove
@@Newmobiletricks What is the capacitor's function? Does removing it present any problems, if it is not replaced?
Sir, i couldn't identify the capacitor on my Panasonic cordless phone board pls help me sir.
send board pic watsapp 9866330075
How can I contact you, dear as I have same problem in my cordless phone
present iam not working any shop
My panasonic cordless KX-TGA651BX has no display. plz guide.
Hi
my phone LCD is not completely blank. you can see the words and number hard. is it the fault of the capacitor?
plz send your phone display pic my watsapp 9492917997
కెపాసిటర్ తీసిన తర్వాత కూడా వైట్ స్క్రీన్ వస్తుంది
How about the same LCD problem on kx-tg2356 , where is the part we need to repair? Thanks~
Pic send front & back board pics
I have same problem with my 4 phones. Model Panasonic KX-TGA101S. Someone to please guide in English. Thanks
Meu amigo seus vídeos ajuda muito mas o.Meu modelo é kxtga671lb o meu telefone está com display fraco poderia mostrar como arrumar este por favor
వేరే విధంగా ఏమైనా ఉందా చాన్సేస్
repair out of area or rang
Cost of capacitor .
5 to 10 Rs
My phone has the same problem,where can I find an English version of this video.
Sorry brother
Mark Cohen did u find english version??
Sir pf value
naku teliyadu same colour same size cusi replace casukondi
Model no. KX-TG6711CX
How to contact you?
My watsapp 9492917997
Sir naa daggara panasonic cordless phone undi adhi on kavadamledhu solutions cheptara
Charging అవుతుందా
Yeah
Fixing a display screen
handset dead mein kya kya problem ho sakti hai
Penasonic cardless phone ki cal chesthunte number display meeda ravatledu. What's is the problem .
Those are not capacitors...
Kxtg 7621 Panasonic cordless having same LCD problem, what is solution?
I have the same handset KX-TGA931T
Remove 1 cap, put battery, display blank, resolder the cap
Repeat for next 4 caps, but display still blank...
What are the values for each of the caps?