Please sir make a video on form tolerance and their differences And also difference between 1. cylindricity and circularity 2. Run-out and total run-out
Sir ur video is just amazing....I have watched many more videos to understand this topic, but urs is the best...I request u to guide us untill the last topic of gd and t sir
You can convert hole size tol into position tol [called as bonus tol] only if we use MMC modifier. It means that you get addition tol to control location as actual hole size departs from its MMC.
Thank you for suggestion. Right now I make these videos for Design Engineers and they feel comfortable to understand technical terms in English. But in future if need arises, I am open to use Hindi as well ;-)
This is an excellent concise introduction to GD&T that explains the most basic concepts in a relatable way. Kudos to Mr. Kutto!
Glad that you liked the video Mr. Andrew Parker :-)
Just to correct, ISO abbrevation is International organization for standardization
Yes, correct.
Slip of tongue!
Great Video and thanks for bonus information on the latest changes in ASME Y14.5M Standard.
Glad that you liked the video :-)
Thank you for this new GD&T video; Good content, please upload more videos about design;
Sure, Thank you so much.
Excellent!
Thank you 🙏🙏
Two words answer mass production.
Please sir make a video on form tolerance and their differences
And also difference between 1. cylindricity and circularity
2. Run-out and total run-out
Good video - Keep up the good work Sir!! Your videos will reach more people soon!!
Glad that you liked the video! Lot more to come ;-)
We appreciate your effort. Please make more and more videos to sharp our skills.
Thank you Amit Sharma!
Very nice explanation
Thank you Prasad!!
Thank you sir
👍👍
Really wonderful sir
👍👍 Glad that it was helpful for you!
Nice ,, amazing explanation and video 👍👍👍 pls make more informative video
Thank you Akash!
Lot more to come :-)
ur videos are very helpfull to me
Happy learning ;-)
Very helpful sir👌
Good to know that it was useful for you!
There is no "M" . It is just ASMEY14.5 2018. "M" was removed in 2009 standard itself.
Good catch :-)
Sir ur video is just amazing....I have watched many more videos to understand this topic, but urs is the best...I request u to guide us untill the last topic of gd and t sir
👍👍🙏🙏
Could you please make a video on composite true position. And the difference between ISO and ASME also sir. It would be very useful for your viewers.
sure in near future.
Hello Sir..can you please explain what will be the effect if we interchange hole size tolerance with its position tolerance?
You can convert hole size tol into position tol [called as bonus tol] only if we use MMC modifier.
It means that you get addition tol to control location as actual hole size departs from its MMC.
@@mechanicalvault Thank you for the response
sir, please make more videos
Sure 👍🙏🙏
How to find job in pune/ chennai/ bengalore/NCR delhi for fresher mechanical design engineer?
Thank you Vishal, sure!
Sir , I want to gain domain knowledge .please suggest me any institution .It should be best as per your knowledge. Thank you!
Visit our website www.designgrads.in
Agar kuch hindi bhi use krte aap to kitni acchi video bnti ye
Thank you for suggestion. Right now I make these videos for Design Engineers and they feel comfortable to understand technical terms in English. But in future if need arises, I am open to use Hindi as well ;-)
Sir I contacted you in email kindly reply