Hi Bobby Z I have just bought a 1979 Yamaha DT125 Enduro in reasonably good condition. I will be passing through Bangkok in December 2019 so would love to meet up to have a chat if you are open to that. Regards, Pat Ireland
Sweet vid I just subbed.. I habe the same bike but its the dt100 1982 enduro sweet bikes that's for sure ive got to put in a new spark plug an she'll be running even better then before
@@ashtonleogaoiran2999 - when I bought the bike it had no trigger coil or CDI box. Somehow the owner had used on of the other coils to trigger the spark coil. I fitted a new wiring harness, CDI box and the three correct coils including a trigger coil so now back to standard condition. If you watch the next videos you should see this.
Do you mean the side stand. This should be held on with a nut and bolt. Maybe someone had changed it fur the wrong part? Stick nuts and bolts can be cut off carefully with a hacksaw. Stuck pins can be soaked in WD40 or similar then knocked out.
I just use good quality spray cans. TOA brand here in Thailand. Apply lots of thin coats and then a top coat of clear lacquer. For the fuel tank I got a car body shop to spray a coat of 2K clear coat as it is fuel resistant.
Great Job Brother 👍👍👍✨✨✨✨
Great job! I've got a 1975 DT 125 I'm going to get running again. The same one I learned to ride when I was 12.
Shawn Carroll - Part 2 is now on my channel...
I look forward to seeing part 2....
Chris Pearson - Part 2 is now on my channel...
Hi Bobby Z
I have just bought a 1979 Yamaha DT125 Enduro in reasonably good condition.
I will be passing through Bangkok in December 2019 so would love to meet up to have a chat if you are open to that.
Regards,
Pat
Ireland
Sweet vid I just subbed.. I habe the same bike but its the dt100 1982 enduro sweet bikes that's for sure ive got to put in a new spark plug an she'll be running even better then before
Wilk you come do mine now lol? Not joking either I would love for you to do it.
how to source its meter?need 1..
Hi, i just want to know if this is already cdi or still contact breaker?
This model is already CDI ignition
@@bobz1736 i see on the magneto only source coil and charging coil no trigger coil right? I guess from source coil direct to cdi.
@@ashtonleogaoiran2999 - when I bought the bike it had no trigger coil or CDI box. Somehow the owner had used on of the other coils to trigger the spark coil.
I fitted a new wiring harness, CDI box and the three correct coils including a trigger coil so now back to standard condition.
If you watch the next videos you should see this.
@@bobz1736 ok thank you for the information..I'll watch your video
Hi! I have a 1979 yamaha DT 125 MX and i’m having trouble removing the pin that holds the prop to the frame, do you have any idea how to take it of?
Do you mean the side stand. This should be held on with a nut and bolt. Maybe someone had changed it fur the wrong part?
Stick nuts and bolts can be cut off carefully with a hacksaw. Stuck pins can be soaked in WD40 or similar then knocked out.
On wich shop you got a new clutch??
Here in Thailand easy to get thru Facebook groups. Can still buy from Yamaha
Hi,what type of paint did you use for the resto?
I just use good quality spray cans. TOA brand here in Thailand.
Apply lots of thin coats and then a top coat of clear lacquer.
For the fuel tank I got a car body shop to spray a coat of 2K clear coat as it is fuel resistant.
@@bobz1736 Thanks.
อู่อยุ่ไหนคับ
@@arnrangearangae895 - I do myself. No garage.
como que saven de motos es calimati 125
Jajajajaj es calima 175
รอ p2 คับ
Pt 2 - ua-cam.com/video/dqWJgkDgovA/v-deo.html
Pt 3 - ua-cam.com/video/evfqksnc764/v-deo.html