It is getting heated as well. Even after i install the driver, my port is not showing. My nodemcu blinked once and than there is no blink. Kindly help me in this regard
Hello my name is Raunak thank you so muchthat you teach us about this softwareI was not knowing about anything on this but when I watched your videoI learnt everything and I have done it step by step and I have successfully completed my uploading thank you
I have the same board as yours. Windows 7. Port is selected as com5. Board is chosen same as yours. I hear audio from the laptop when the board is connected with usb cable. When i upload blink sketch, i get error "the selected serial port doesn't exist or your board is not connected"! Tried several usb cables but the problem persists. What else i am missing?
That sound occurs everytime to insert any usb device or cable. And do one thing check the port list before connecting the usb to system and then connect it . Now check for the new port that has appeared that will be the port in your case and if it's not showing any new port then may be your usb cable is not working for you
Thanks a lot for your reply. I have installed ch340 drivers. When i connect/disconnect, the board, serial port com 5 appears/disappears. So drivers and cable are ok but i am getting the same issue
Is it possible to connect the devices remotely with nodeMCU, only power will be providing to device and balance communication through some wireless signals
Sir I'm eswara rao, I am in the project of home automation using nodemcu, For Home automation, what was the program that should be uploaded to nodemcu and how can I get it
what if i want arduino send an integer or number or "done" , if user choose selection menu ? once he select 1 from 5 selection, then arduino send to nodemcu then to server , ?
Innovate Yourself i have touch screen, arduino, nodemcu On the touch screen there will be 5 selection for user. And there will be 5 selection on the touch screen waiting user to select. Everytime user select one of them , i want to send “done” to that selected, to online database or server, then store it there and later i will access it from mobile app.
Innovate Yourself i need to connect tx ,rx, then if user select option no1 then serial.write(one) to nodemcu, then node mcu send to firebase, ? And one is integer number will take the value of selection right? I am totally lost
sir, i have done all this and i still get this error: *A fatal esptool.py error occurred: Failed to connect to ESP8266: Timed out waiting for packet header* , can somebody tell me the problem
thanku sr... even i have watch 20+ videos for update port driver none worked except yours.... Thanku sooo much❤️❤️❤️❤️
It is getting heated as well. Even after i install the driver, my port is not showing. My nodemcu blinked once and than there is no blink. Kindly help me in this regard
Same problem facing
Same bro
Check your connection may be your circuit is getting short
Hello my name is Raunak thank you so muchthat you teach us about this softwareI was not knowing about anything on this but when I watched your videoI learnt everything and I have done it step by step and I have successfully completed my uploading thank you
Thanks for ur explaination, good but some of our students wants the explaination in kannada language bcz they can easily understand
You're welcome. I can't make a video in kannada as I don't know kannada.
Jabardast tutorial!
I have the same board as yours. Windows 7. Port is selected as com5. Board is chosen same as yours. I hear audio from the laptop when the board is connected with usb cable.
When i upload blink sketch, i get error "the selected serial port doesn't exist or your board is not connected"!
Tried several usb cables but the problem persists. What else i am missing?
That sound occurs everytime to insert any usb device or cable. And do one thing check the port list before connecting the usb to system and then connect it . Now check for the new port that has appeared that will be the port in your case and if it's not showing any new port then may be your usb cable is not working for you
Thanks 🙏
If you checked everything then may be you will have to install ch341 drivers on your system
Thanks a lot for your reply.
I have installed ch340 drivers.
When i connect/disconnect, the board, serial port com 5 appears/disappears. So drivers and cable are ok but i am getting the same issue
Thank your for the driver sir, it fixes my problem for not detecting my NodeMCU to my laptop
Thanks a lot...u r my life saver
Thanks merai bhai .........🙌
Thanks a lot. Very good explained.
Really happy to hear this from you ❤️🥰
Is it possible to connect the devices remotely with nodeMCU, only power will be providing to device and balance communication through some wireless signals
Yes it's possible
@@InnovateYourselfashu can you make a video on that
Thank you soo much sir
Sir I'm eswara rao, I am in the project of home automation using nodemcu, For Home automation, what was the program that should be uploaded to nodemcu and how can I get it
Is the program written for atmega using arduino can be run in ESP8266
Excellent brother
what drivers do i have to install on mac for this to work?
Tutorial is very fine
But, NOW HOW DO I STOP THE BLINKING LED!!
Port is still not showing
Thank you very much..... ❤️❤️❤️
How to programming 16x16 ws2812b led matrix panel?
love you broooo
How to make wifi jammer
carry on bro
Tnx lot
Thank you 🙏❤️❤️😊 sir
thank you for your help.
Hello sir I am unable to install drivers what can I do
same bhai kai se karey install?
Sir c++ ka tutorial bhi dal do
Thankk you sir!
what if i want arduino send an integer or number or "done" , if user choose selection menu ? once he select 1 from 5 selection, then arduino send to nodemcu then to server , ?
I didn't get your question. Can you please clarify what do you mean?
Innovate Yourself i have touch screen, arduino, nodemcu
On the touch screen there will be 5 selection for user. And there will be 5 selection on the touch screen waiting user to select.
Everytime user select one of them , i want to send “done” to that selected, to online database or server, then store it there and later i will access it from mobile app.
Cool, then write a program for it. What's the issue then
Innovate Yourself i need to connect tx ,rx, then if user select option no1 then serial.write(one) to nodemcu, then node mcu send to firebase, ? And one is integer number will take the value of selection right?
I am totally lost
I am having a problem. The nodemcu heats very badly. How to fix it
May be the board is shorting or you have made some connections
Thanks you bro 👍👍🥰🥰
plz share the link ,what we have to put on additional boards manager URLS ... plz fast reply
arduino.esp8266.com/stable/package_esp8266com_index.json
@@InnovateYourselfashu thank you so much and share ESP32 library link for proteous
sir, i have done all this and i still get this error:
*A fatal esptool.py error occurred: Failed to connect to ESP8266: Timed out waiting for packet header*
, can somebody tell me the problem
Did you get the answer because I m getting the same error...
Which board and port have you selected?
Thankyou so much ❤
Bro it's not how you pronounce aardiaano it's arduino so do keep it in mind anyway nice explanation
I get an error uploading a code
Thanks dude
Sir after installing the driver, my arduino ide still has the port option disabled
You should connect the node oreslse you won't get that
My node mcu for ntp cleint for clock
The link is not working
In preferences i cannot find any esp package
Can you send me the link which you added
Am not seeing the link you said sir
What link?
Thanks bro
Iam not able to see any port after installation
There may be a problem with your usb cable
bro nodemcu code want
i try to download it is telling me error
What's the error
Sir can we use our normal phone cable for NodeMcu to connect to my PC or do we need a specific one??
normal..mini usb
Thanks a lot
Thanks
Hello I am vaibhav saini
Hello vaibhav
bro port not available in my pc
Check your USB cable
Thanks you bro
You're welcome 🥰
i am not able to load mcu
Why? What's the problem?
Incoming voltage to node mcu
error downloading that nodemcu package
Enter the url correctly
@@InnovateYourselfashu sorry my mistake...it worked..thank you ❤️😊
sir can you please give your whatsapp number
8209829808
Erro compiling board for node MCU(esp8266-01)
Same problem😞
For both NodeMCU 0.9 and 1.0
Me too🙁
My NodeMcu is not blinking
Any error??
Not blinking why
What is not blinking?
@@InnovateYourselfashu wifi jamer kaise bnega ?
Port is comming com3
your link not valied
What link??
Its 3.3 or 5v
??
Bro for node MCU how much input voltage
How are you connecting your nodemcu?
@@InnovateYourselfashu through LAPTOP BRO
Then why do you require to know that. Anyways its 3.3v
thx
bro error da raha ha bar bar
What's the error??
demudu neeku challaga chudali ayya
Thank you so much 🙏
Sir drivers settings
No needed. But in case your system requirements drivers to be installed seperately then download ch340 drivers for your OS.
Port com5 programming
?
clean your desktop pls :v
Tq so much sir😊
Thank you bro