Great setup Carlos, Wondering if there is a basket/pod for an 8" Cicada cm8.4 in lid to separate for addition of 2 Cicada 10? Also currently running dsp 150.4 and cx 250.2 but want to add bda 1400.4 for subs???
Would that 6x9 fit in a bag with the Rockford 10in drop in subs that have a small circle on top? The Rockford 6x9 and hertz 6x9 fit because of the small magnet sizes.
It will not But we modify the Rockford enclosure to reform the top and we make Them fit . You can either heat the top of the enclosure with a heat gun and close the lid slowly a few times or cut the top of the enclosure and plastic weld a new top
Carlos you always give us the latest and greatest. I just purchased the cm65.4x w/ the tweeter kit, also cm69.2 w/ the bridge and rrt1. I have 2 SD 800.4 4ohm amps now. Should I purchase new amps, if so what sizes? Also should I separate the tweeters and control everything independently through the s8 dsp?
You should’ve gotten the 4 ohm 6x9 that way you can bridge one amp To the front And one to the rear If you cannot swap out the speakers upgrade the second amp to a 1200.4 2 ohm and bridge it yo run the 6x9 and tweeter bridge
@@NVSAUDIO Should I put the tweeters on their own amp and use the dsp for complete control or use the crossover it comes with? I have a SD 400.4 sitting around. Thanks for the assist.
Can you run a chx65.2 or ch65.2 off 1 channel of a sd 1200.4. Will the ohm load be to low. Right now running some ch6.54 in the front. And cm 65.4 in the rear. I’d like to switch to 2 ohm to run more power out of this amp.
Thank you for caring about us… and taking the time to keep us informed! 🙏🏾
Awesome that Cicada is paying so much attention to motorcycle audio! Thanks for showing us Carlos!
Carlos and Cicada are the best in the business! So excited to start on my build for my 2024 HD Road glide here soon!
as one of the 1st super early adopters and 1st diy guy making videos with cicada I am excited for the new products. May be making some upgrades soon
Grand slam 💪🏼
So many choices ty
Great setup Carlos, Wondering if there is a basket/pod for an 8" Cicada cm8.4 in lid to separate for addition of 2 Cicada 10?
Also currently running dsp 150.4 and cx 250.2 but want to add bda 1400.4 for subs???
We use the 8 inch buckets from Beyma
Would that 6x9 fit in a bag with the Rockford 10in drop in subs that have a small circle on top? The Rockford 6x9 and hertz 6x9 fit because of the small magnet sizes.
It will not
But we modify the Rockford enclosure to reform the top and we make
Them fit .
You can either heat the top of the enclosure with a heat gun and close the lid slowly a few times or cut the top of the enclosure and plastic weld a new top
Thank you very much! Love your channel. Very informative.
Carlos you always give us the latest and greatest. I just purchased the cm65.4x w/ the tweeter kit, also cm69.2 w/ the bridge and rrt1. I have 2 SD 800.4 4ohm amps now. Should I purchase new amps, if so what sizes? Also should I separate the tweeters and control everything independently through the s8 dsp?
You should’ve gotten the 4 ohm 6x9 that way you can bridge one amp
To the front
And one to the rear
If you cannot swap out the speakers upgrade the second amp to a 1200.4 2 ohm and bridge it yo run the 6x9 and tweeter bridge
@@NVSAUDIO Should I put the tweeters on their own amp and use the dsp for complete control or use the crossover it comes with? I have a SD 400.4 sitting around. Thanks for the assist.
What amp to power 2 chx65s and 2 chx6x9s
Woofer with the ring kit is available by spring?
Yes
When do the cm 6.5 x with the black center get released I have looked but can’t find them
2 weeks
I wish y'all wouldve covered the CXX's? Would you suggest the Cicada CXX or Galeforce F1
How long is the wait for CHX 6.5 2 ohm?
Where can we get the 6x9 baffle?Will the one for the hertz 690 neo fit.its from American hard bag?
What 6x9 are you using ?
@@NVSAUDIO sorry I’m using the chx6x9
Can the evox 800.4 run 4 of these cicada chx65? Thanks.
What's the part # for the new 6x9 you you paired the tweeter with and the end of this video?
Cm carbon
They are not out yet but we have them in stock ( we got them early )
Reach out to us if you need any .
Do they have them in 2 or 4 ohm and how much
Hey Carlos I’d like to talk to you about the 10’’ mid bass and the hardware.
Give me a call at the shop tomorrow morning
I’ll be there early 908-527-6772
Voice coil size on the chx6.5?
2 inch it hasn’t changed
Wow the Chx8.4 sounds amazing it was a perfect upgrade for my ch8
Long shot but no tempate for indian challenger\pursuit bags?
How much does having the baffle on the CM69 makes?
I don’t understand the question
@@NVSAUDIO will having the baffle on the back of the speaker affect the sound that comes from that speaker. Limit the output or anything
when is the release of the cut in kit and port sir
Can you run a chx65.2 or ch65.2 off 1 channel of a sd 1200.4. Will the ohm load be to low. Right now running some ch6.54 in the front. And cm 65.4 in the rear. I’d like to switch to 2 ohm to run more power out of this amp.
If your 1200.4 the 4ohm version or 2ohm?
Hertz 690 neo vs the new Cicada 6x9 and tweeter. Rider bike don't want to cut the bags.
Cicada and tweeter
@@NVSAUDIO Wow!!! I know how you love the 690 neo being it's a 3 way speaker. The Cicada must hit harder.
The 690neo are a thing of the past. Hertz really needs to step there game up 😂
When will the 6.5 carbon fiber component and tweeter grill option be available?
This spring
I may have jumped to quick I ordered the chx8.4 to replace My ch8.4 but may have to negotiate with them to return for the Cmx8
I'm glad I waited. I'm looking to replace my older hertz 6.5 in my fairing with the cicada audio component setup for my RG
My order will arrive Tuesday so ill be on the phone with Forrest Monday I wanted more mid bass
P R O M O S M 🤭