there are 2 types of videos posted on youtube, one type is by people who believe the videos content, will at least in part, be of benefit to others, the second is by people who want to reveal just enough information to elevate their self anointed position of superiority without providing anything that will actually be of help to others… thanks for showing off!
A credit to you good job. I had a buggy with a 750 Honda Boldor Engine. The guy who built it fitted Bongo Van rear axles but the weak link was the rear sprocket sheared under full throttle.
AWESOME *VIDEO, EDITING, MUSIC, AND PIRANHA!* Seriously man, I love how symmetrical and light (but sturdy) it is, and with that 1000f engine performance has to be insane. I bet you can take off faster than the actual bike with two wheels putting power down! *(Do you change gears with the pedals?)*
Right now im building a go kart with a Kawasaki 500 engine on it currently the biggest obstacle is wiring! not very good with it, and let alone im 17 with very little money haha, hopefully i can get this done in the next 2 months
+interloperopp ill have to as im tearing the engine apart due to a blown head gasket i believe! this is all fun for me becaude im a big gear head but never had anything to tinker with besides my Mr2+
video is good, allot of info, but the music was so distracting I had to mute the audio. like to hear a narrator explain the expedited process in the video muck more than, the music. in a word.. distracting
I don't exactly have an engineering degree or anything, but, aren't those front struts too short and/or too thin? The back looks like it would survive some extreme stuff, and the front looks like it would under perform. I think they are normally taller at least. Again not an expert, just very curious. I'm not knocking it, the thing looks awesome and that engine would give hundreds of smiles an hour. Suggestion, perhaps look into some downforce. If it is meant for fast street driving, you would definitely increase your lateral g's. Those long struts help the wheels hook up too.
First i have to say Thatcher you build an awsome vehicle. I watch the Video many times. but I got one question. Did You use the left pedal for clutch and the right for Gas? Breaks and shift by Hand?
There is no way you can get four years of video in this short of a space. The kart was built in Russia, or one of the other Slavic countries. It also looked like he took a big sprocket, and attached it to the flywheel. It also appears he was able to attach a front wheel drive transmission to the engine. He also built his own receivers and axle housings, probably to fit the bearings that are attached to the front wheel unit. This in itself is a way cool idea because those things can be picked up for not much money, and are better than the aftermarket stuff that is very expensive. Plus you have a reverse and disc brakes that you can go to the parts store and get another one if one goes bad. Also the engineering in the factory front end and transmission is much better, and has been proven over the last hundred years or so. Eziplans sells plans to build the Piranha, Barricuda, and the Sidewinder. It's the same as Edge products. Check em out.
i don't use oil. i put z z bearings for the dust and i seal it very well... i don't have any problem yet.... the differential is 100% limited slip.... sorry for my English....
Esse negócio aí , pode ser colocado um assento de moto e levar duas pessoas . ,Na parte de trás da pra fazer uma pequena caçamba . E levar uma bagagem .
το οικονομικό σχετίζεται με τα ανταλλακτικά που θα επιλέξεις να βαλεις ή τι θα βρεις να σου κανει... σου προτείνω να ξεκινήσεις απο το μοτερ βρες κατι καλο με λιγα χιλιόμετρα γιατι υπάρχει μεγαλη καταπόνηση.... ευχαριστώ για το σχόλιο σου....
+stair s σε ευχαριστω για το λινκ....σκεφτομαι να ξεκινήσω. ενα παρομοιο προτζεκτ και σιγουρα θα φανει πολυ χρησιμο αυτο π μ εδωσες...απο ενα z750 εχω βρει ενα μοτερ δεν μπορω να πω οτι εχει λιγα χιλιομετρα αλλα δεν ειναι πολλα!
Salut, jolie bête ! je souhaite aussi construite un kart cross pirahna comme le tien, peux-tu me dire de quelle voiture proviennent tes pivots à l'avant stp ? Merci.
amigo como estas un gusto saludarte mira que mi hijo esta con el proyecto de fabricarse un buggy piraña como el tuyo crees que podris compartirnos los planos para hacer uno nosotros te lo agradeseremos gracias
poderia me dizer que tipo de bucha vc usou nas pontas das balanças? esses nailon branco e de balança de moto e? e esses amortecedores trazeiros sao de que?
Disculpa. amigo es un buen travajo me pregunto si podría compartir. la informasion me gusta mucho su travajo quisiese poder crear uno similar con su guia agradesco su colaborasion
Friend have a motor Suzuki 650cc , I was crazy about your project. Could you share with me the plant chassis transmission etc. I would be very grateful . I live in Brazil. Thankful Menotti Caliari
só eu que reparei que tem um objeto parecido com um cartucho de espingarda calibre 12 encima do carinho aí kkkkkkkkkkkkk (2:22) ou eu tô ficando louco kkkkk
Δεν σταματάω να το βελτιώνω ακόμη και σήμερα και θα το βελτιώνω .... Ειναι κατασκευές που έχουν πολλά πράγματα να βελτιώσεις η να προσθέσεις σαν αξεσουάρ... πάντως γενικά είμαι υπερευχαριστημενος και σε διασκέδαση και σε οδηγική συμπεριφορά...
hey guys awesome build im doing a project just like yours is there anyway i could ask for help on the dimensions and frame graphs that would be epic you could hekp
It doesn't matter his taste in music what matters are bad ass creations.... WoW Dude is all I can say! ( And W.T.F is wrong with the music anyway?) Mark Sainsbury , Daniel Yehudi
From the quick shows... it looks like the driven sprocket is bolted to the left axle flange, which in turn will spin the guts of the differential. Unless he turned the diff into a "spool" it'll one wheel peel all day. Still... a nice build.
hola espero me puedas ayudar me gustaria echarle un vistaso a tus materiales si es que tienes al gun manual agradeszco tu apoyo yo tambien quiero armar una
close to a year,lots of time,welding,fitment,re-fitment,making parts,throwing parts away,making new parts buying accessories and material.its a lot of time,effort,learning,error and correction.and it is not cheap.
there are 2 types of videos posted on youtube, one type is by people who believe the videos content, will at least in part, be of benefit to others, the second is by people who want to reveal just enough information to elevate their self anointed position of superiority without providing anything that will actually be of help to others… thanks for showing off!
A credit to you good job. I had a buggy with a 750 Honda Boldor Engine. The guy who built it fitted Bongo Van rear axles but the weak link was the rear sprocket sheared under full throttle.
AWESOME *VIDEO, EDITING, MUSIC, AND PIRANHA!*
Seriously man, I love how symmetrical and light (but sturdy) it is, and with that 1000f engine performance has to be insane. I bet you can take off faster than the actual bike with two wheels putting power down! *(Do you change gears with the pedals?)*
It takes skill to build something awesome like that. Nice work.
ever take it off any sweet jumps
hahaha
Very well thought out, and skilled craftsmanship
Α ρε Ελλαδαρα,μπραβο ρε μαστορα εισαι πρωτος!!!
👌
Nice buggy build.
απίστευτη δουλειά....μπράβο σε όλη την ομαδα
great work just hope your radiator doesn't burts
Congrats Αρχοντα!!! Ωραιος..
amazing metal work I'm getting ready to build something looking for the right engine deff has to be at least 900 cc
Right now im building a go kart with a Kawasaki 500 engine on it currently the biggest obstacle is wiring! not very good with it, and let alone im 17 with very little money haha, hopefully i can get this done in the next 2 months
good luck my friend.... is a good project...
buy a haynes manual
im putting together a rd400 kart front rear discs with nitros
+interloperopp ill have to as im tearing the engine apart due to a blown head gasket i believe! this is all fun for me becaude im a big gear head but never had anything to tinker with besides my Mr2+
Nice buggy
those are some terrible welds. cool build, i would imagine it needs more power with that much weight though.
great video. alot of dedication put into this
Very nice Buggy!!!
video is good, allot of info, but the music was so distracting I had to mute the audio.
like to hear a narrator explain the expedited process in the video muck more than, the music. in a word.. distracting
A beauty, very nice job !
I don't exactly have an engineering degree or anything, but, aren't those front struts too short and/or too thin? The back looks like it would survive some extreme stuff, and the front looks like it would under perform. I think they are normally taller at least. Again not an expert, just very curious.
I'm not knocking it, the thing looks awesome and that engine would give hundreds of smiles an hour. Suggestion, perhaps look into some downforce. If it is meant for fast street driving, you would definitely increase your lateral g's. Those long struts help the wheels hook up too.
First i have to say Thatcher you build an awsome vehicle. I watch the Video many times. but I got one question. Did You use the left pedal for clutch and the right for Gas? Breaks and shift by Hand?
sick. im going to build one of these for my 440 snowmobile
I have a few water craft based 1200 triples. All ready to drop in a sled or buggy. 310hp on ppg
Świetna robota 👍👌
Od jakiego auta są tylne amortyzatory? Golf III kombi? 🤔
show papai parabens projeto massa
Are you proud of that welding? That's not welding, that's baking.
Cool build BTW!!!!
Mantap bang..😁🙏
Awesome build
What did you use for the rear differential?
My uncle died from painting without a respirator.. Just some advice, wear your PPE!!!
There is no way you can get four years of video in this short of a space. The kart was built in Russia, or one of the other Slavic countries. It also looked like he took a big sprocket, and attached it to the flywheel. It also appears he was able to attach a front wheel drive transmission to the engine. He also built his own receivers and axle housings, probably to fit the bearings that are attached to the front wheel unit. This in itself is a way cool idea because those things can be picked up for not much money, and are better than the aftermarket stuff that is very expensive. Plus you have a reverse and disc brakes that you can go to the parts store and get another one if one goes bad. Also the engineering in the factory front end and transmission is much better, and has been proven over the last hundred years or so. Eziplans sells plans to build the Piranha, Barricuda, and the Sidewinder. It's the same as Edge products. Check em out.
Nice looking build :)
very nice video. well done!
Awesome buggy I'm building one right now. Just wondering what car did you use your rear struts from?
what kind of differential did you use? where can I find a differential that can work with a chain drive transmission?
lethaldriver... i use a transmission of citroen gsa, i cut the gear box and use only the differential with the brakes...
what about lubrication? shouldn't this only run while submersed in transmission oil?
i don't use oil. i put z z bearings for the dust and i seal it very well... i don't have any problem yet.... the differential is 100% limited slip.... sorry for my English....
Hablas español wero?
that looks pretty cool
awesome video!
i bought the plans for one of them some day im gona build that baby nice ride yours is
Read the title and said...niiiice
Amazing fab work!
adamky really
Where was this filmed? That's a beautiful place to live
Esse negócio aí , pode ser colocado um assento de moto e levar duas pessoas . ,Na parte de trás da pra fazer uma pequena caçamba . E levar uma bagagem .
I know it is old, but let me just note you that the suspension setup youve got is gonna work really bad on dirt race tracks
Those welds though
Great video however,Your video would be much better without the music!.
man you guys should sell these i would want one
What did you learn to be able to do such things?Mechanical engineer? Please answer! Thank you previously.
Άψογη δουλεία. Μπράβο σου. Πόσο σου κόστισε αν επιτρέπεται? Και μήπως ξέρεις που θα βρω σχέδια ίδια ή παρόμοια?
www.scribd.com/mobile/doc/102058235/1-Piranha-Buggy-Plan
το οικονομικό σχετίζεται με τα ανταλλακτικά που θα επιλέξεις να βαλεις ή τι θα βρεις να σου κανει... σου προτείνω να ξεκινήσεις απο το μοτερ βρες κατι καλο με λιγα χιλιόμετρα γιατι υπάρχει μεγαλη καταπόνηση.... ευχαριστώ για το σχόλιο σου....
+stair s σε ευχαριστω για το λινκ....σκεφτομαι να ξεκινήσω. ενα παρομοιο προτζεκτ και σιγουρα θα φανει πολυ χρησιμο αυτο π μ εδωσες...απο ενα z750 εχω βρει ενα μοτερ δεν μπορω να πω οτι εχει λιγα χιλιομετρα αλλα δεν ειναι πολλα!
+Baggelis Tsr καλό μοτερ θα κανεις δουλειά... οτι χρειαστείς στο μέλλον μπορω να σε βοηθήσω.....
+Baggelis Tsr ok καλη επιτυχία....
I happened to notice a lot of people are building buggy's like that
very good man !!!!
that video fuck!!! VERY GOOD!
great job mate ;)
I'd probably carve in some fake ass vin number and insure that shit for the road.
*2:02** THE POINT YOU SAiD ''WTF, THEY ARE GREEK?''*
Salut, jolie bête ! je souhaite aussi construite un kart cross pirahna comme le tien, peux-tu me dire de quelle voiture proviennent tes pivots à l'avant stp ?
Merci.
Nice. What's the back axel off?
Is there a reason why the chassis is made with square tubes instead of round ones?
amigo como estas un gusto saludarte mira que mi hijo esta con el proyecto de fabricarse un buggy piraña como el tuyo crees que podris compartirnos los planos para hacer uno nosotros te lo agradeseremos gracias
What kind of front and rear shocks are you using? I am currently looking for budget alternatives myself so your advice will be appreciated!
Do you have skechs with dimensions of the frame and suspension pieces...I really need them
Moj Chanel Heres an idea. Build your own. Be original.
That guy that Will kill you Then I advise you to never buy a vehicle and build your own. Be original.
@@406fishing9 lol
@@406fishing9 hahahhaha
@@406fishing9 nice one there
Cool man .
Μπραβο..αν βαλεις και καθισμα που εκτόξευσε θα σου βαλω αριστα :-) :-)
poderia me dizer que tipo de bucha vc usou nas pontas das balanças? esses nailon branco e de balança de moto e? e esses amortecedores trazeiros sao de que?
Orchard paint booth?
Fuck’n struts lmfao. I guess some people are easily impressed
love it
Disculpa. amigo es un buen travajo me pregunto si podría compartir. la informasion me gusta mucho su travajo quisiese poder crear uno similar con su guia agradesco su colaborasion
Any pointers on how to build a go-kart for a newbie? Starting a project in school & I'm clueless as to where to begin
I would start with the design like drawing it out how u want to do the frame
1 inch Square tubing and a welder
Looks wild. How does she roll ?
ua-cam.com/video/yvBnwZfQV1g/v-deo.html
stair s Thanks my friend !
Amigo una pregunta de qué auto son las flechas de transmisión.. y el diferencial de qué es ? Un saludo
I just wanted to see him drive it
Friend have a motor Suzuki 650cc , I was crazy about your project.
Could you share with me the plant chassis transmission etc. I would be very grateful .
I live in Brazil.
Thankful Menotti Caliari
👍👍
this waw awesome
só eu que reparei que tem um objeto parecido com um cartucho de espingarda calibre 12 encima do carinho aí kkkkkkkkkkkkk (2:22) ou eu tô ficando louco kkkkk
Those welds made me cringe
What are the front kingpins/spindles you are using?
Also making a piranha buggy with cbr1000f huricane engine. How and from what did you make the rear axle?
Hi.. it is form citroen gsa and works great for now but i want to make a new rear axle from a VW ...
@@SRD2016 thanks didin't expect such a quick respond :D
how long did it take
it take 4 years....
How long did this take to build overall?
Piranha? Where do u get them at?!??
muito da hora
Μπράβο φίλε μου, μια ερώτηση, hub και αναρτήσεις τι χρησιμοποίησες;
Γεια σου φίλε ... Εμπρός άκρα από ascona τα πίσω είναι χειροποίητα δικά μου ,αναστήσεις πίσω αυτοκινήτου και εμπρός από husqvarna cr 125!!!
@@SRD2016 θα γινόταν με πίσω αναρτήσεις από τα καλάμια του cr125 η του 250 η γενικά από καλάμια μηχανής;
Δεν αντέχουν τόσο βάρος τα μπροστινά... Γι'αυτό έβαλα αυτοκινήτου γιατί είναι για μεγαλύτερο βάρος και έχουν και μεγάλη βύθιση....
@@SRD2016 Και μια τελευταία, αν το εφτιαχνες ξανά σήμερα τι θα άλλαζες; Ευχαριστώ.
Δεν σταματάω να το βελτιώνω ακόμη και σήμερα και θα το βελτιώνω .... Ειναι κατασκευές που έχουν πολλά πράγματα να βελτιώσεις η να προσθέσεις σαν αξεσουάρ... πάντως γενικά είμαι υπερευχαριστημενος και σε διασκέδαση και σε οδηγική συμπεριφορά...
Pokazesz jak jest rozwiazane przeniesienie napędu?
could you give me the plans ??
how much did it cost to build???
What pipe did you use and about how much length?
It needs better rims
hey guys awesome build im doing a project just like yours is there anyway i could ask for help on the dimensions and frame graphs that would be epic you could hekp
Of course my friend.. If i can help you...
Theedgeproducts.com
mano esse motor q vc ussou e da cb1000 de 1988?
เสียงดุจริง
Nice
Those welds :-/
It doesn't matter his taste in music what matters are bad ass creations.... WoW Dude is all I can say! ( And W.T.F is wrong with the music anyway?) Mark Sainsbury , Daniel Yehudi
what kind of differential did you use? im lost how you got the power from the motorcycles gear box to the diff.
From the quick shows... it looks like the driven sprocket is bolted to the left axle flange, which in turn will spin the guts of the differential. Unless he turned the diff into a "spool" it'll one wheel peel all day.
Still... a nice build.
hola espero me puedas ayudar me gustaria echarle un vistaso a tus materiales si es que tienes al gun manual agradeszco tu apoyo yo tambien quiero armar una
Que diferencial usaste?
which type of welding needed in welding buggy frame..??
Solid welds....
TIG, MIG, ARC.... whatever... just, weld it properly. Derp derp.
i am going to buy a piranha buggy but i wanted to know how did it take to build it??
close to a year,lots of time,welding,fitment,re-fitment,making parts,throwing parts away,making new parts
buying accessories and material.its a lot of time,effort,learning,error and correction.and it is not cheap.
no
honda pilot each your heart out.
amigo me podrías. ayudar con planos. o medidas de la estuctura agradesco que. me. colabores en cualquier cosa