How To Build a DIY Smokeless Fire Pit That Really Works!
Вставка
- Опубліковано 15 чер 2024
- In this video I show you how to build a smokeless fire pit that really works. Coming up with a solution to cutting down on the amount of smoke was important to us and this has really delivered. There are smokeless fire pits that can be bought online and at some stores but they are somewhat small, pricey, and just not our taste. That being said, the reviews said how well they worked so this was my attempt at using the way that they are designed to help eliminate the smoke and turn it into a more standard, larger, and less expensive smokeless fire pit.
Items Used:
36" Fire Ring: amzn.to/2Rev8jC
or 27" Fire Ring: amzn.to/3xWvsUV
Hole Saw Kit: amzn.to/3ucgqIB
12" Retention Wall Pavers
Thank you for watching and for subscribing. You can support the channel at no cost to you by using one of the above affiliate links. This helps support the channel for new content!
Blessings,
Adam
How To Home assumes no liability for damage or injury. How To Home highly recommends using proper safety procedures and professionals when needed. Our content is for entertainment purposes only. No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not How To Home. How To Home will not be held liable for any negligent or accidental damage or injury resulting from equipment, tools, electrical, fire, electronics or any items contained in this video. Attempt projects and repairs at your own risk. - Навчання та стиль
Thanks for creating this video! I’ve enjoyed all kinds of fire pits over the years while camping and I’ve found the best way to cut down on smoke it to scout for dry hardwood (usually from storm damage) and split it into smaller pieces allowing more air to mix with the fire as opposed to burning large logs. I’ve also noticed that fire pits with high sidewalls block radiant heat so you have to stand almost over the edge of the fire to get warm which can be hard on the eyebrows 😬
Excellent and simple instructional video. I'm going to build a pit and have been watching many videos. Your's is the best. Thank you so much!
I am glad to hear you liked it and found it helpful! Thank you very much for the feedback! Good luck with the project!
Agreed-so straightforward!
Gas fireplace insert and propane tank would work also with cwramic logs never have to find wood for it and you could vrill on it also
Grill on it
Awesome! Sitting , relaxing by a fire without playing musical chairs❤️
Love the split stones idea for the air intake gaps. You've retained symmetry and structural support. I'm using that for sure.
That is exactly why I did it that way. Many are asking why. Appreciate the feedback Steve!
Thank you for this! I'm building an off-grid home in VT, and I will most definitely be using this tutorial for our (necessary) fire pit. Awesome.
Awesome! Sounds like it is probably a beautiful place! Hope you like your pit as much as we have!
Can I ask, what instructions are you using for your off grid build? Did you draw up the plans? I'm not even sure where to start with something like that.
Instead of buying a metal ring, a broken washing machine or a drier is free and has a nice, big metal container inside. Bonus: it already has holes in it, so no need for drilling. Just cut it, invert it so that the holes are on top, and continue as normal with the bricks (making sure to make the top as airtight as possible so that the heated air travels out the holes, you may have to use mortar). Extra bonus: if you have welding skills, weld on pipes at a 45 degree angle to the right or left for the air to travel through. As is rushes through the angled pipes it creates a spinning vortex and you'll get a fire tornado forming.
Please do a video on this sounds so cool
@@AW-md2ew break into a house, unbolt the the nice container and get out
@@kawkaw8623 😅 perfect answer 👌
@@AW-md2ew I have both a washer and dryer that are dead and useless I’ll be doing this
That’s a damn good idea, sonbut my fire pits gonna be big, much bigger than a washer or dryer Drum. Unless you talkin bout, one of them there, commercial dryer, now that might work.
Great video! I appreciate that fact that you were able to cut the stones with your hand, but also showed us without your skill and training how to do it. Very well done.
Thanks for the video! Was about to build my own firepit and will definitely be using this smokeless method. The only thing I may adjust is spraying some high-temp paint on the drilled holes so the exposed metal doesn't rust as easily since the rest of the ring is treated with high temp paint already.
Sounds like a plan! Thanks for the feedback!
That's not a bad idea, dude, since there's going to be a lot of oxygen going through them, along with a lot of heat absorbed by them, which is going to promote faster than usual rust.
@@HowToHomeDIY where do you get the 4 piece fire ring?
@@scottplecker2296 There are links in the description for different sized ones. I'd love to try this out when mine finally rusts a hole in the bottom.
Commenting for your channel's sake, love what you're doing here. Thank you for the intelligent and massively practical video, no excessive American waffle either, very much appreciated you have no idea.. Good luck from Australia!
How fortuitous; just started looking at fire pits; love the function, look and style of this one.
Also am familiar with several marshal arts and now a new one: Rock Kwando - Well played!
We will also cover woodjitsu eventually as well. Also, very important.
@@HowToHomeDIY HAHAHA!!!
I prefer John Wick's Shootokan style Gun Fu.
Ahh yeah, John and I have the same sensei. Super good guy but kind of a short fuse. He had people over last weekend and one guy accidentally ran into his dog while catching a football. Haven’t seen or heard from Bill since. Also, maybe just coincidental, but I can’t seem to find any of my dang pencils! 🤷♂️
Martial not marshal
Cool video, like being in Cali you need this and because we don't experience different techniques to make it smoke less. Thanks again for the video.
I'm looking at building a fire pit in my back yard and glad i found your video....never thought about getting rid of the excess smoke, this is awesome!!
Glad you liked it! We have loved ours! Have been waiting on the weather to cool down to fire it up again! Thanks for the feedback!
This is something my wife and I are going to try. Thank You. Efficient and easy
Awesome! It is good to do projects together! Hope yall like it as much as we do!
Great demo. I didn’t have the ability to break rocks so just can also leave half space and continue lying pavers. About same effect with no cutting.
Good idea if...you have kids/grandkids that mind! Like "stay away form the fire PIT!!!!!"
Great job! This is a great example of understanding fire behaviour.
Thank you for sharing this. I had already thought of the idea because I have a bunch of bricks sitting around but I wasn't sure how to seal the top. Next step is to look for that fire ring.
Nothing makes me happier than seeing someone find real, affordable solutions to problems! You saw something that worked and thought "how can I make this better?" and then you made it better! Awesome video, I'll definitely be trying this when I build my fire pit for this summer!
Glad you liked it! We are really enjoying it! Too bad we didn't have it sooner! Thank you very much for the feedback! And good luck on the project!
Fire rings are expensive though!! 😱
Not sponsored, I paid for it myself. And I listed the one I used. I have yet to do a video that I was paid by a company to do, although I’ve been offered numerous sponsorships I want everything to be unbiased and authentic for anyone that watches my channel.
@@Super--Star Literally no one asked you
Really appreciate this video. I knew I could probably do this but had no idea on how to do this. You walked me threw this step by step and everything came out great. Thanks so much
Rick
Awesome! Glad to hear it came out great and you are liking it. We have loved ours. In fact we like it so much that I am in the process of editing a video of us making a nicer seating area around it. Thanks for the feedback Rick!
@@HowToHomeDIY Do you have the link for the video?
What bit did you use to make the holes? I attempted to start mine today, but my 2” hole saw bit isn’t even cutting through once
My wife and I just watched this and truly enjoyed it...and now I am obligated to build a smokeless fire for us to enjoy...Thank for posting this!!! God Bless
Awesome! Glad you both liked it. It is a fun project. Hope you all enjoy yours as much as we do ours! Thanks a lot for the feedback Jack!
Absolutely crazy that 3 years later, a company on Amazon now sells the inserts with holes already drilled for smokeless pits!
This was a most excellent video, very well done! I just have to share this with a family I know. who've been having the smoke problem with their current pit. Thank you so much for sharing your ideas!
You are welcome. Glad you liked it! Some modifications I would do differently, I would make the holes quite a bit smaller and maybe more of them. If you don't have larger fires, maybe go with a slightly smaller ring so the holes are closer to the fire. Both of these should just make it even better. Also, I have a 2nd video showing part 2 of this, would recommend doing that install as well! Thank you for the feedback!
Note comment above, Dry Hardwood.
I wish I would have seen this video before I built mine. I might disassemble mine to make it this way. Great job and great instructions.
Yeah I wish I saw my video before I did my first one too haha. Appreciate the feedback. We are really liking it!
Can't wait to upgrade my fire pit with this build. Thanks!!
Hey Cory, glad you liked it! Thanks for the feedback!
This is going in my favorites! I hope I'll ever get around to using this coz I'd like to go out and try it right now!
nice job explaining the whole process. well done.
Glad you liked it! Thank you very much for the feedback!
Completed mine. Amazing outcome. THANKS!
Awesome! Glad to hear it sounds like you are enjoying yours as much as we are! Thanks for the feedback!
Awesome video. I know what I'm doing this weekend . Great step by step. Thanks for including what materials you used in the description. And I appreciate the humor.
Absolutely. Glad you liked it! Hope you enjoy the firepit! Thank you very much for the feedback!
Thanks for sharing, I have been putting off building a fire pit. This looks like is the motivation I was waiting for.
Awesome! Hope you liked yours as much as we like ours!
You, sir, deserve all the thumbs up!!! So doing this!
Much appreciated!
@@HowToHomeDIY this is amazing could we have an update in about a year
Thank you.
I am, literally, finishing up a pond and waterfall and next project is the fire pit :)
Very interesting. Thank you for showing how simple it is to build that fire pit. 👍
Glad you liked it!
Great video! I’m going to give it a try myself. Thanks for the great explanation and demonstration.
You are welcome. Glad you liked it! Good luck on the project!
Hahaha, the only comedy I've actually seen in any DIY. The extremely dry delivery was perfect
😂 Glad you liked it. That was a fun part of the video to make. Thank you for the feedback!
I love DIY stuff. Thanks for the brilliant and easy to do firepit!
Hey thank you for the feedback! I have to know, have you been practicing your rock kwan do on your keyboard? I see your name. 😂
That’s a great fire pit! Thank you for sharing with our family we wish you well in your future videos, love your style bro keep it up!
Hey Ian, you are very welcome, I am glad you liked it! Thank you very much for your kind words and feedback! If you and your family make this or something like it, I hope you all enjoy it and the time together!
Thank you for this video! I was able to buy a fire ring at Home Depot with a lattice pattern which saved me the step of cutting holes in the fire ring. I was able to put my fire pit together pretty quick. It burns great! Thank you!
Thanks for the chuckle -I’m glad you turned your hat around for “high speed ,low drag” working! Lol. Great job brother
Rock kwan do does not require perfect aerodynamics but they certainly do help! Glad you liked it 😂
@@HowToHomeDIY Your Rock Kwan Do skills are certainly good.. I think I tried with my head once, but now I dont remember.. :-) Seriously though.. Awesome project.. I didn't know this was possible - I hadn't looked into it, but I thought the "smokeless" was all about the fuel being used, and not about creating the draft.. I'll definitely be doing this
Hey, I have no interest in making a fire pit but I stumbled across this, it looked interesting and watched the whole thing. Great video, if I ever decide to make one, I have a pretty good idea on how it works and how to do it. Thanks for sharing.
haha well I am glad you stumbled across it. Thank you for the feedback!
Awesome job my friend.
Great procedure, work and video progression.
Great all around.
Thank you 👍
Since we moved into our new house I've been wanting to have a fire pit and now I know how to build it the right way and to be smokeless and my wife will love that part of it thanks for the video.
Sounds like a plan! Glad you liked it. We have enjoyed ours for sure! Congrats on the new house!
Awesome man, definitely going to add this to my DIY list.
The irony of finding this video is too much after this weekend. Thank you for making my decisions on building a firepit that much easier.
Glad I could help! 😂 Thanks for the feedback!
Thank you so much for your answer. My fire ring is, according to its specs, 3mm thick. I used a 1” Milwaukee hole saw with carbon and it worked like a charm. You have been very helpful and great explanatory video.👍👍. Thank you.
Excellent! I have a family member that is wanting one and I may try the 1 inch hole saw or maybe even a little smaller but with more holes just to see if it makes a difference. Thank you for the feedback Sarah! I am glad you liked it!
@@HowToHomeDIY I wanted a 1/2" hole saw but the smallest there was available at Home Depot was 1". So that's what I used.
I love it. I will be doing something similar in the spring.
Great video it made everything in my life better and I even get better gas mileage in my truck 👍🏻
Dude I'm pretty if you switch to Geico you could save 15% on your car insurance too!
Love the video! I was about to wing it at my own firepit when i stumbled upon this gem! Love the idea of creating a cavity for cool air and holes so they can control the smoke output. Never would have thought of that. Keep up the good work bud!
What kind of rocks are you using?
@@tazwelch1 I used crushed marble and used concrete retaining wall blocks from Depot
Wow...bigger and better than the store-bought ones that are so expensive. Thanks!
Definitely going to build this when I'm ready. Thank you.
You are welcome! Glad you liked it! Hope you enjoy yours as much as we do ours!
Nice video, I've been thinking about doing just this. One thought, instead of splitting the stones, couldn't you just remove two and space the rest a bit farther apart on the bottom layer?
Maybe his idea was to keep a vacuum by constricting the intake a little
To increase the longevity of the fire ring, spray paint the fresh metal made by the hole saw with high-temp paint.
Yeah I wondered why he didn't..
I do in one of my follow up videos
If he knew he was going to cut holes then why the hell didn't he cut them before he set them up and could have done them on a flat surface ?? Oh well not my Job ha ha !@! Good idea Eh ?
High temp paint doesn't hold up with direct flame but still a good idea.
@@deere1485 true, I touch up throughout the year
Love my Solostove for fires on my deck but building one of these for the backyard too. Thanks!!!!
I also enjoy your solo stove for fires on your deck. 😁👍
I trully appreciate this clear and concise video as well as all the links!
You are welcome. Glad you liked it! Thanks for the feedback.
You could take out a couple of stones then distribute the remainder evenly and you'll have the support and the vents around the pit.
Simple solution. Especially since this would negate the need to split the stones in half.
Exactly, that is how I did mine. Work smarter, not harder.
That's what I was thinking. Could you not space each bottom stone out about 2 or 3 inches? Can you have too many air channels on the bottom ring? does it affect how this works?
i second that
The metal jacket is essential for the effect he is trying to achieve - not merely better general ventilation at the bottom of the fire, but the heat/convection-powered forcing of fresh air into the superheated exhaust stream at the top of the fire, to duplicate the "afterburner" smokeless design of the expensive stainless firebowl shown at the beginning. Merely adding more vents at the bottom helps burning generally, but it does not create the afterburner effect that completes the burning of the exhaust gases.
Thanks! I am looking into building one now instead of a fire pit that burns up my grass
Thanks for the comedy and great writing. I will definitely do when I move my pit.
I love this I'm going to build one this weekend
Love that powerful karate chop!!!!!!!! And love this pit, amazing job!!!!🔥🤘
Rocks dont stand a chance 😂 Glad you liked it. Thank you very much for the feedback!!
@How To Home - Good idea & video, thnx! BUT for a true comparison you should lift the fire ring out and try it with just the 3 layers of stone (with the spaces on bottom as u have now). Your previous design was in-ground I believe, with no airflow (= smoke). I've always wanted to see a standard firepit with airflow vs a firepit with a ring & holes design. (The idea being, do you really need a ring to create the draft, or does the fresh air coming straight into the fire at the lower level do the job just as well). PLEASE PLEASE PLEASE do this! It would be easy with your setup.
Nice job.
I've been planning the same. But going to make a ring of cement for the top. Constrict the Firebox as other viewers suggested and makes it something you can sit on.
This was a great video! I was wanting to build a fire pit. This gave me a great idea.
Many Blessings!
Glad you liked it! Thanks for the feedback! Blessings to you as well!
Am a Slate belt in rock-kwon-Do and will say that the chop in this vid gets a barney rubble award .
I am honored and I accept! Means a lot coming from a slate belt!
Looks really nice, does it really work a lot better than a normal fire pit? A side by side comparison would be cool to see and compare the difference.
Great job overall.
Great video. I've been looking for something just like your fire pit. I plan on building pretty much the same thing. Thanks.
Awesome! Glad to hear you like it! Hope you enjoy yours as much as we enjoy ours!
Rock Kwando!! Great job. Looking forward to building it
wish I saw this before shelling out so much $$$. Love our smokeless but this would have been so much cheaper and fun to build! TFP!
Very cool bro!
Your brick breaking technique ir ROCK solid! Lol
Ahhhhh I see what you did there 😂 Very good.
That's awesome! I definitely want to try this too! Time to go all out and fix the yard how we want!
Absolutely! I think too often we wait too long or when we are getting ready to sell our homes before we do the things that we wish we had all along! We really have enjoyed this. Thank you for the feedback!
Thanks! Great job! Gonna have to try one now
Rok Wan Do - love it!!
That was fun haha Thanks for the feedback Ross. Glad you liked it.
Great video. I've been looking for steps to build my own and this fits the nitch perfectly! One question, how big are the holes you drilled for the air circulation
If you pause it at 7:01 it looks like he is placing his center point at an Inch and a half. I would guess either a 3/4 or 1 inch hole as the top looks to be a half inch from top of rim to top of previously cut holes.
Will give this a shot. I agree with the comment below on the top row of stone. I think a one inch thick curved flat cap stone on top and this put the top row of stone so the angle is laying into the fire pit. Great Video.
Great video Adam. Thanks so much for creating it.
..."If you're not trained in the arts of rockwendo"..nice one! LOL Thanks for the vid bro, looks easy and money wise feasible!
It took many years of dedication and training 😂 Glad you liked it! It was a fun project and we have been enjoying it! Thanks for the feedback.
@@HowToHomeDIY do you think this fire pit would work also? It has vented sides and flanges at the top and bottom. Thanks Fr a great video. www.amazon.com/Bond-Manufacturing-52118-Scotts-Valley/dp/B08MXQ9VY8
I have no idea why this video popped up in my list but I started watching anyway and realized I know you haha. Good content and hope you're doing well.
That is funny! Yeah man, everything is good here. Hope all is good with you as well. Is good hearing from you. I am glad this video came across your screen.
Always learn more when I watch your videos! Thanks, J
Inovation and demonstration. Great job and video.
Great concept! My concern is any time I've used metal rings is they don't last long. Heat burns off any coating, steel trusts, fire burns rust...two years later the ring is burned through. For that reason I'm working on something incorporating the smokeless design but using fire brick instead of steel.
Did you get it figured out and built 🤔
I would guess that the fire brick would insulate the heat from the outside chamber. The idea is to have super high heat air rushing in to the top to create the re-burn.
Thanks for that. And just an idea here: regular stones would absorb and conduct a ton of heat, right? Well, if you live in a cold place and have a fire for heat -- that's perfect. But if anyone wants a fire for the aesthetics or for cooking but are in a hot climate (and actually don't want to be warmed up), then experiment with aircrete blocks instead of stone -- they act as insulators -- you may even be able to rest your hand on the outside of the ring while the inside is glowing hot (also prevents kids getting burned fingers)
Have two fire pits?
That was great information and tutorial. This is excellent idea especially for prepping for when the SHTF. You want to be able to still cook prey you have killed to eat, but don't want to give smoke signals to everyone around a ten mile radius!!
I had a similar idea for a firepit. Thanks for sharing.
This is a fantastic design...you do good stuff my friend. As long as you have holes on each side I don't think it matters whether they're spaced evenly or not. The air hits the fire ring at the bottom which is going to redirect it anyways. I used a solid fire ring (no cap) inside my stone pit and left two inches of space at the top ...no need to drill holes in the fire ring. Then I made a circular cap stone that hangs over the edge by about 1.5 inches. I have about a 1 inch gap between fire ring and the stones. Works very well once the fire pit gets hot enough.
Hey Sebastian, that sounds like a good idea too! Would be nice if they allowed uploading pictures, would like to see it! It really is amazing how well it works to get rid of the smoke. Thank you for sharing and thank you for the feedback!
Hey Sebas, does your design reduces smoke as well? What about radiant heat? Can you feel the heat when seating around the pit? That's the biggest complaint with the commercial stoves.
@@rickurt1 yes, we can feel the heat based on the type of wood used. Red Oak burns hot so we feel it around the pit area so I use that in the colder months.
@@sebasstuff8847 thanks. I wish I can see a picture. Cheers.
I did something similar. I expanded my pit lined the bottom with fire bricks and created gaps along the out side of the pit that draws air in and instead of a ring I just used fire bricks and used blue drainage stone on the outside for looks. I also used granite stones that I have found at the beach and around the forest buy my house.
Very little smoke and it looks awesome.
do you have a photo this sounds amazing
I subscribe to your channel and you gave me some hope with this video for which I am grateful. You see, I am 61 and have never really built things or taken on big home improvement projects; mainly from a lack of confidence perspective, sadly. My wife & I recently bought a house that has a firepit in the backyard but it needs to be redone. I was able to follow your video very well and I liked how you explained each step very thoroughly as you did not hurry through it. Thank you for that! I even watched your follow up video where you answered folks’ questions on this topic. I subscribe to your “How To Home” Channel and look forward to seeing more of your videos. Keep up the good work to teach us how to get things done around the home. :-)
Hey Ron, I really appreciate the comment. That is one of the big reasons I enjoy doing this channel is trying to help folks and also to help give them the confidence that they can do it too. It is very common to feel unsure. So thank you again for reaching out to me and for the feedback! Take care!
Thanks for the awesome idea, I will definitely use it
What is your thoughts on recessing the pit a little bit instead of having it that high? I feel the heat escapes to high rather then towards yoir body when the height of a pit is tall???
I just had to subscribe when I saw that "karate chop"! 👏 🤣
Years of training have now been validated! Thank you! 😂 In all seriousness, I’m glad you liked it and look forward to seeing you around! Thank you for the feedback Linda!
Nice work! Thank you very much! Love and blessings from Ontario Canada!
Thank you very much! Glad you liked it! Love and blessings to you too, stay warm up there!
What a wonderful job you did , with the fire pit , thanks 👌
Glad it you liked it! Thanks a lot for the feedback!
Great video thanks. A few questions 1) would it be OK to create space between bottom layer pavers rather then having to cut them at all? 2) Are the retention pavers 12" wide & 12"deep? (I'm trying to figure which size fire ring I should buy if I want the total size of my firepit with pavers to be no larger then 55" diameter) 3) the hole saw kit link you provided is not available is there another you recommend or should I just shop Amazon for cheapest price? #diy girl here that's the reason for all the questions. Thanks!
1) Yes you can, I just didn't want that look personally and wanted only a few opening instead of small ones all the way around as I believe it creates a better vacuum affect but others have said they have had success doing it the other way too. 2) The retention blocks I bought are 4.75" x 11.75" x 6.75". 3) Yeah they sold out of them recently but think they should restock but I also have had luck with my craftsman hole saw kit. Make sure you are getting a kit capable of cutting metal. Even then some of them wear down really fast. I hope I was able to answer all of your question! Glad to hear you are a DIYer, that is what this channel is all about is trying to inspire folks to try to fix and create things on their own! If you have any other questions, feel free to ask!
Which hole saw did you buy? I guess I need a better one, because mine isn’t cutting it.
Great video.. I’m going to try this this weekend! I do have a few questions though.. what is the diameter of the holes you drilled, how far apart did you space them, and how far down from the top did you drill them? Are you at all worried about the bricks moving with people putting their feet on it?
I saw a different video, where the 1/2" holes were 2" apart, but not sure how far from the top to measure down.
I don’t even have a yard but I love videos like this!
This is a good DIY I'm going to use for my new house.
You can build the ring with stones as well leaving a gap for the air to travel up, although metal is a better heat conductor once the stones heat-up the effect will be the same.
Actually it won't. A Solostove does not work by increasing draw generally, but by using heat-powered convection to force heated fresh air into the exhaust stream for an afterburner effect.
What influenced your decision regarding how high to drill those holes - I was expecting them to be lower? Would pre-drilling on your bench have been significantly easier?
I looked at the smokeless firepits in stores and that is where they are. The idea is to get that fresh air into the top of the fire to help burn off the excess smoke. I don't know that on the bench would have been easier as I was able to sit on the fire pit and lean into it to cut the holes.
Man, I enjoyed this video so much I didn't even skip the commercials. Well done.
Man, thank you very much for the feedback! I hope the commercials were at least interesting 😂
Great job! This is my next project. Thanks for sharing!
Awesome! We definitely enjoy it! Thanks for the feedback.
7:45 no joke getting metal in your eye! When I was a teen I was using a Dremel and got a "tiny" flick of metal in the corner of my eye and LORD did that hurt like hell! Super lucky it didn't do any real damage!
One way you could improve this design and add more airflow is to look up a "Dakota fire hole" and combine that with what you already have to provide even more rushing cool air to the fire. Make a small tunnel down into the middle of the pit and out one side with something like cinder blocks, bricks, or a pipe ETC. Then cover the end of the tunnel inside the pit with a metal grate, maybe do the same on the inlet end of the tunnel to keep from stepping into or tripping over it if it's not tucked out of the way?
Yeah I would like to avoid that at all cost! Glad your eye was ok!
I actually made a video doing pretty much exactly what you are suggesting. Feel free to check it out on my channel. It definitely made a difference!
@@HowToHomeDIY LOL so I see! Ya a Dakota fire hole works really well...
If you don't want to break stones, you could build your pit with a thin brick paver placed edgewise between each big stone. Then remove the bricks from the bottom ring, and you have about a 2 inch gap between each stone.
More irregular shape, which can shift.
I have the exact same style fire pit…definitely doing the ring & mods you showed 🍻
So cool! I had no idea you could do this DYI! I’m not a handy guy, but I think that even *I* could do this! Thank you!