Laura Sole, what ppe would you approve of? I only ask because the application will differ between product demo and field use. It always does, and always will.
The magnet will hold the cuttings in a lengthwise orientation that maximizes the chance of getting them embedded in the skin, meanwhile your demonstration shows someone grasping the magnet with bare skin, not covering their fingers with any PPE.
Feed Tap is sold in several different set-ups. You would need to review the set-ups and check with a local distributor for a price. Feed Tap: www.reedmfgco.com/en/products/water-services-tools-and-machines/feed-tap-drilling-machine/ Where to Buy: www.reedmfgco.com/en/where-to-buy/
The cost depends on the options chosen with the machine. Best is to work with a distributor in your area to determine which pieces you need. www.reedmfgco.com/en/where-to-buy/ If you have questions when you pursue it, contact us again.
Specifically, they are showing the FT2000UNIV #09165. It is found in this tool family: www.reedmfgco.com/en/products/water-services-tools-and-machines/feed-tap-drilling-machine/
We welcome you to get in touch with REED about your dissatisfaction. Send us a message at reedsales@reedmfgco.com. We'd like to know what caused your issue.
Never seen a more useful magnet than this one.
Great vid
Next demo, please use required PPE. It sets a good example for other users. Thanks.
Great tip! REED realizes the importance of PPE and we do stress it in our literature.
Laura Sole, what ppe would you approve of? I only ask because the application will differ between product demo and field use. It always does, and always will.
Awesome
Good demo,
The magnet will hold the cuttings in a lengthwise orientation that maximizes the chance of getting them embedded in the skin, meanwhile your demonstration shows someone grasping the magnet with bare skin, not covering their fingers with any PPE.
You're right - our operator in the demo should have worn close-fitting jobs. We have added PPE recommendations to our user manual.
Please do demo repair 🙏 The shaft is sliding all the way down and all the way back up without turning the black cylinder.
Figured it out the 1 1/2 inch tension pin broke on the top of the shaft, either way a video would be nice for anyone running into the same issue.
Thanks for the update @jruoff16. We'll share with products department.
I want taping machine
Awesome looking device, how much does a setup like this coast in 22?
Feed Tap is sold in several different set-ups. You would need to review the set-ups and check with a local distributor for a price.
Feed Tap: www.reedmfgco.com/en/products/water-services-tools-and-machines/feed-tap-drilling-machine/
Where to Buy: www.reedmfgco.com/en/where-to-buy/
How much it cost
The cost depends on the options chosen with the machine. Best is to work with a distributor in your area to determine which pieces you need. www.reedmfgco.com/en/where-to-buy/ If you have questions when you pursue it, contact us again.
how i can buy in India?
Check in with Arizona Tools. Web: www.aztc.in
Arizona Tools Company
67-A, N. S. Road, Ground Floor
Kolkata 700 001 (WB) INDIA
Office Phone: +91 33 4001 3866
Cell: +91 98300-30618, 90380 81456
+91 95868 00967, 98300 30612
Email: info@aztc.in
skype id: shahct (www.skype.com)
What is the model of this tapping machine?
Specifically, they are showing the FT2000UNIV #09165. It is found in this tool family: www.reedmfgco.com/en/products/water-services-tools-and-machines/feed-tap-drilling-machine/
Ford brand hot tap way easier
Every user has their own preference. REED's Feed Tap is quite versatile.
Terrible machine. Cheap feeling. Take a Mueller any day..
We welcome you to get in touch with REED about your dissatisfaction. Send us a message at reedsales@reedmfgco.com. We'd like to know what caused your issue.