This is just what i need! I'm trying to minimize my radio equipment (running out of space) and whith this mod, i can remove the cb (older, big station model) I bought the 705 for it's size and HF/vhf/uhf combination, adding cb capability is just awesome! Thanks Andy! ❤ Subscribed!
I have an Icom IC-718 and an Icom IC-728, both full coverage HF ham radios. The 718 is a fairly new radio, has been around more than 20 years, but you can still find them new. I understand they are being discontinued. The 728 is a much older radio, last made in 1992. They are both much larger and heavier than the IC-705. They are intended to be used as base stations. I consider the 728 the best radio, it has a triple conversion superheterodyne receiver, something you just don't see anymore. It does not have menus and is not programmable. Both put out 100 watts max. The 728 has what is known in the U.S. as a MARS mod, which allows it to work on 11 meters SSB, both transmit and receive. The 718 can be converted, but it is much harder to do, and I don't want to ruin it. I would never try what you just did. Good way to ruin an almost $1400 radio.
Трансивер для выезда на природу не предназначен, ток потребления огромный, разъёмы хлипкие , слабый аккумулятор. Лучший трансивер для полей для выезда на природу в горы это трансивер Discovery TX-500.
I just did it and it worked IC-705 (US version) Thank you so much!. I Only used small slanted cut de-soldering tip( not much luck with a point tip) @ 390 degrees (centigrades) almost the same size as the soldering on the diode (to avoid damaging neighbouring components), no flux, and not hot air. It took less than a minute to bubble under the component (used cheap digital microscope from amazon). A that point I switched to the other side and applied minimum force sideways. They came off clean, one at a time. It took a lot of practice with an old iPhone since this is my first time doing any of this. Removed surface components for one afternoon after I felt confident enough to do it on my brand new radio!. It was intimidating at some points but im so glad I did it. Good luck guys!
I can confirm that this works. I used my solder station with an extra-fine-point tip at 700 degrees with an exactor knife and a magnifying glass-lamp (LED) to heat up the diode-spec on the lower left bank and was able to lift one end of the diode. I put everything back together and worked like a champ. I'll be posting some pics to FB soon
Don't ever make modifications like this when the electronics are bad on a cloth, it's better if it's on a table, use electrostatic mats because then you'll be crying because the £1K equipment won't turn on
Hi Mate it infuriates me to see people using cameras that invert the the picture, text is all reversed and screw drivers that are turned the wrong way. is it a Iphone issue?
A nice little handheld CB could be handy piece of essential equipment in any emergency. Gathering information and the need for reliable communication network hasnt changed for eons..
Does anyone know the difference between the USA and EU 705's, both with this mod? The EU version is less money ordering it from overseas even though I'm in the USA. No seller here knows even the big one.. Tryin to save a buck on the radio for a tuner. Great video by the way!
I wonder if the manual has details of what diodes do what frequencies. Back in the 70s the Icom IC 240 used the same diode synthesiser control system to activate channels
There's a catch. In the U.S. and some other countries, its 4 watts max when using the citizen's band radio service on FM and AM, but 12 on Single Sideband. Does the radio know to lower output, or do you just have to be careful?
Any idea what is the bandwidth on the euro version compared to the USA version. Is there a mod to open up the USA frequencies which are from 440 to 449 MHz?
There you go he says and zooms right in on lots of rows of diodes. There it is you can see where I removed it, but no we couldn’t. All we could see was a mass of electronic components. You should have circled it, der!
did this to my 7300 ... i recommend to use filter3 on FM because otherwise deviation is too large for most CB radios. You can store the channels in memory and have a very fast channel scan and can use the buttons on the mike for switching channels .. cheers! very nice setup!
There is No Reason that hf rigs cannot have an am and fm 5 watt, 12 watt ssb, 27 mhz cb band mandatory, in the radio...paying over $600 for a radio should give at least full access to cb channel 9, which is monitored by police, and 19 is the other ultimate channel. Then need a separate license for gmrs...sillyness. The radios do look fun to collect.
Hey I was watching your ebike Trek 5 Marion video. I bought one of my friend but he didn't have the charger. Can you help me with which charger I need to get? Thanks!!!!
Hi Andy, and others in the community, Just wondering if you or anyone on here has had any luck with widebanding this to cover TX/RX on 4m/70Mhz and what output power you're getting if any. I'm seeing mixed reports on online forums. It would be great to hear about your experiences with it. 73's Tom
Yes, after mod, the radio can also receive and transmit on 70MHz, complete shortwave (excep. lowest frequency, under 1,6 MHz), It transmit also in the airband with all of modulations! 2m - from 118 MHz to 173,99 MHz 70cm 400 MHz to 469,99 MHz 6m from SW to 54 MHz 4m from 68 MHz to 74,79 MHz 73
Nice video! Would be nice to have 4m on rig this as mentioned. Nice rig nonetheless. And yes 11m is busy these days over in Cambridgeshire/Suffolk as well! 73 DE 2E0HIA
It's easier to just crush the zero ohm resistor with a thin pair of snips..That's the way I've always done wide banding on mine,, that way you still have the solder pads in place should you want to add a blob of solder to return it back to amateur bands only..
@@DontM8-__- it won’t. I did the mod and it only will TX up to around 457 mhz. If you have another radio close by monitoring gmrs and you are transmitting on same freq after mod you will hear it on other radio but I think it’s coming from the portion of the radio that hasn’t went thru the amplification circuit yet. With a watt meter you will see there is virtually no output power on gmrs. Maaaybe .01watt. Everyone else I have found is having the same results after the mod.
Cheers matey , not sure I would be confident enough to take a chance messing with the 705 inners, but was good to watch, I’m literally back to radio this year, used to have a CB in the 80s, an old maxcom 4e lol, got my ham licence in March and got a bit bored with Ham so bought a Randy 3, just need to get an antenna outside , daft question coming up, could I use a mag mounted antenna in my loft, I wanted to buy the Sirio 5000, would it work? I’m sure the SWR would be all over the place, I almost pressed the buy button earlier but held back, all the best mate
Right, so hold fire on the sirio, it'll never work great in the loft unless you get really creative and make a massive groundplane or loads of radials underneath it, mobile antennas are groundplane antennas so they need a really good groundplane. The best sort of antenna for cb is a 5/8 wave vertical 30ft above the ground. Yeah it's gonna be big but that's just how it is! Alternatively the sirio boomerang on a pole on the ground or mounted at gutter height (or higher) is a smaller option that still works well. Cheaper option is a wire dipole from ebay for 11M on a 10M telescopic pole from amazon on a heavy parasol base! A lot of CB action is on SSB but there is activity on FM, you'll likely need an amplifier too as everyone runs a bit of power these days to get over the noise! I'll do a video on all this soon!
Hey Guys ! Keep cool ! .... Very usefull video before opening the 705 to get it TX .... on 60M as well, if you don't like CB ! Curiously It doesn't from standard. Thanks Andy.
🎉🎉new drinking game🍺🍺🍺 Every time Andy says “Basically” take a shot, I’m currently in hospital with alcohol poisoning and the doctors say my liver will never recover 😂 On a serious note another fantastic video Andy and great to see CB’s coming back in to fashion.
@@andykirby don’t edit them out this is going to be a new trend 😂 yea I’m all good thanks Andy, currently in New Caledonia in the South Pacific building a crane.
@@benspeedschannel888 I was like that too, just forced myself to do it. Like with anything you're anxious about you can either force yourself to do it or remain scared forever.
Great video Andy. Ignore the negative comments below from the disgruntled & uneducated. Keep on enjoying the radio hobby on all bands including cb radio. Cheers.
I have to admit, I would be nervous as hell doing this to my IC-705 ! I can build kits with SMT. I really like your confidence tho and its very interesting. I think I'll keep to my CRT SS6900N for 10m and 11 meters.
The last time I check channel 19 in the United States is at a frequency of 27.185 MHz. Back in the mid to late 1970’s I knew what the frequencies were for each of the 40 channels at that time!
Yeah I'm confused as well. 27781 is way out of CB land. 27405 is ch40. So 27781 is even above free handers on 27555 area . So Andy what's up wit dat man ?
@@denp54z Here in the United Kingdom the UK40 channel band plan is between 27.60125 to 27.99125 incrementing in 10 kHz steps. So 27.78125 mhz is UK channel 19.
Yes. And I hope for an even better successor with ATU, backlit keys, separate antenna sockets and built in FT8 and CW decoding. Best would be some kind of software plugins for several digital modes, also for the ones still to come. My 705 shows some quirks when I use it with a directly attached whip. Obviously interference radiation from the display.
no need to de-solder .just use jewelers small flat head the diodes pop right off slide up under and just the slightest twist and there gone.I was done in like 10 minutes start to finish.
Whats funny is the diode basically just fell apart with slightest pressure.I was more scared to try and use a soldering gun.Ive lifted traces with a iron before.What a mess..Thanks for the mod info though!!yes it works great.The 705 is awesome radio being battery supplied i can get some great DX being able to run without a power supply. It's the best LW DXer ive ever had for NDB hunting!! @@andykirby
Awesome, you have and esk8 too. Good vid, I want to mod my 705, I already did it to my 7300. The 705 is so much better for portable ops, I am thinking of getting the backpack just for skating around.. :D 73's N7URH
I use mini wire snips and just cut it with a vaccume running along side it...... diode will just shatter and all bits just get sucked up...... This stops the risk of any heat damade to the rest of the board and is the safest way......
No, the screws are not left-hand threaded. Parts of the vid are L-R reversed. The board closeup appears to be correct. But nice to see the insides of the '705! 73s, N2GX
Andy I have seen your utube videos and have thought about ebikes what belt driven as chains are short of supply at the moment v belts to drive all bikes
This is just what i need! I'm trying to minimize my radio equipment (running out of space) and whith this mod, i can remove the cb (older, big station model)
I bought the 705 for it's size and HF/vhf/uhf combination, adding cb capability is just awesome!
Thanks Andy! ❤ Subscribed!
thats why i love my ft-818 everything in a tiny box and i can use it anyware
From what I can tell, it doesn't even do that.
I have an Icom IC-718 and an Icom IC-728, both full coverage HF ham radios. The 718 is a fairly new radio, has been around more than 20 years, but you can still find them new. I understand they are being discontinued. The 728 is a much older radio, last made in 1992. They are both much larger and heavier than the IC-705. They are intended to be used as base stations. I consider the 728 the best radio, it has a triple conversion superheterodyne receiver, something you just don't see anymore. It does not have menus and is not programmable. Both put out 100 watts max. The 728 has what is known in the U.S. as a MARS mod, which allows it to work on 11 meters SSB, both transmit and receive. The 718 can be converted, but it is much harder to do, and I don't want to ruin it. I would never try what you just did. Good way to ruin an almost $1400 radio.
Enable the Active Noise Filter to lose some of that noise.
Трансивер для выезда на природу не предназначен, ток потребления огромный, разъёмы хлипкие , слабый аккумулятор. Лучший трансивер для полей для выезда на природу в горы это трансивер Discovery TX-500.
Does it open up 2m and or 70cm as well?
The ones sold in Aus have 2m and 70cm unlocked.
Great to see you out enjoying radio Andy! Love this video!
Cheers rog!
I just did it and it worked IC-705 (US version) Thank you so much!. I Only used small slanted cut de-soldering tip( not much luck with a point tip) @ 390 degrees (centigrades) almost the same size as the soldering on the diode (to avoid damaging neighbouring components), no flux, and not hot air. It took less than a minute to bubble under the component (used cheap digital microscope from amazon). A that point I switched to the other side and applied minimum force sideways. They came off clean, one at a time. It took a lot of practice with an old iPhone since this is my first time doing any of this. Removed surface components for one afternoon after I felt confident enough to do it on my brand new radio!. It was intimidating at some points but im so glad I did it. Good luck guys!
I feel sorry for anyone using this video to mod the 705. Everything is backwards on this image.
I can confirm that this works. I used my solder station with an extra-fine-point tip at 700 degrees with an exactor knife and a magnifying glass-lamp (LED) to heat up the diode-spec on the lower left bank and was able to lift one end of the diode. I put everything back together and worked like a champ. I'll be posting some pics to FB soon
I found your video excellent for reducing the amount of equipment in the vehicle. Nice job doing the retrofit.
Don't ever make modifications like this when the electronics are bad on a cloth, it's better if it's on a table, use electrostatic mats because then you'll be crying because the £1K equipment won't turn on
Hi Mate it infuriates me to see people using cameras that invert the the picture, text is all reversed and screw drivers that are turned the wrong way. is it a Iphone issue?
I always leave the diodes end on, incase they need re fitting in the future. Great Vid
Same here. Easier to wideband. Much easier if you need to restore to original state.
Putting them on micro switches might be a good play.
how far does this 27 MHz telescopic antenna work?
Hey Andy. I wouldn't do this on mine, but nice video 73
Haha! Hi mate, got some new antennas to try as well.
Hello 360p my old friend...
A nice little handheld CB could be handy piece of essential equipment in any emergency. Gathering information and the need for reliable communication network hasnt changed for eons..
That mag loop is stunning
Does anyone know the difference between the USA and EU 705's, both with this mod? The EU version is less money ordering it from overseas even though I'm in the USA. No seller here knows even the big one.. Tryin to save a buck on the radio for a tuner. Great video by the way!
Yeah i would like to know that also and if it opens GMRS TX as well
Do you know what the expanded TX freq ranges are for all the bands? I can't find anyone who's listed it.
I wonder if the manual has details of what diodes do what frequencies. Back in the 70s the Icom IC 240 used the same diode synthesiser control system to activate channels
There's a catch. In the U.S. and some other countries, its 4 watts max when using the citizen's band radio service on FM and AM, but 12 on Single Sideband. Does the radio know to lower output, or do you just have to be careful?
Any idea what is the bandwidth on the euro version compared to the USA version. Is there a mod to open up the USA frequencies which are from 440 to 449 MHz?
I’m looking to get a 705 in the near future and will definitely be doing that little bit of work on mine to open it up to the CB bands
There you go he says and zooms right in on lots of rows of diodes. There it is you can see where I removed it, but no we couldn’t. All we could see was a mass of electronic components. You should have circled it, der!
Just to let you know your camera isn't working it's displaying images backwards in your video you might want to fix it
Whoa never thought iCom would be that compact! I need one now but im short on budget!
Its the remote head your looking at the body will be some were else
@@geoffpriestley7001No pal the IC-705 is all in one unit there is no seperate head and body.
Thanks andy great video didnt know cb was making a comeback will have to dig out the silver eagle and the moonraker and c whats about
FYI 27.718 is not channel 19 at least not here in the US. In the US Its 27.185 Mhz.😮😂 have fun
Andy - does it cover 460-470Mhz for US GMRS ?
did this to my 7300 ... i recommend to use filter3 on FM because otherwise deviation is too large for most CB radios. You can store the channels in memory and have a very fast channel scan and can use the buttons on the mike for switching channels .. cheers! very nice setup!
There is No Reason that hf rigs cannot have an am and fm 5 watt, 12 watt ssb, 27 mhz cb band mandatory, in the radio...paying over $600 for a radio should give at least full access to cb channel 9, which is monitored by police, and 19 is the other ultimate channel. Then need a separate license for gmrs...sillyness.
The radios do look fun to collect.
Hey I was watching your ebike Trek 5 Marion video. I bought one of my friend but he didn't have the charger. Can you help me with which charger I need to get? Thanks!!!!
Hi Andy, and others in the community,
Just wondering if you or anyone on here has had any luck with widebanding this to cover TX/RX on 4m/70Mhz and what output power you're getting if any. I'm seeing mixed reports on online forums. It would be great to hear about your experiences with it.
73's
Tom
Yes please! Can you transmit on 467.000mHz?
Yes, the radio can transmit on 467 MHz@@DontM8-__-
Yes, after mod, the radio can also receive and transmit on 70MHz, complete shortwave (excep. lowest frequency, under 1,6 MHz), It transmit also in the airband with all of modulations!
2m - from 118 MHz to 173,99 MHz
70cm 400 MHz to 469,99 MHz
6m from SW to 54 MHz
4m from 68 MHz to 74,79 MHz
73
Nice video!
Would be nice to have 4m on rig this as mentioned. Nice rig nonetheless.
And yes 11m is busy these days over in Cambridgeshire/Suffolk as well!
73 DE 2E0HIA
A 4m mod for the 705 would be a god-send ! why did they leave it off ? I never know :(
It's easier to just crush the zero ohm resistor with a thin pair of snips..That's the way I've always done wide banding on mine,, that way you still have the solder pads in place should you want to add a blob of solder to return it back to amateur bands only..
That's a pretty good tip, they are tiny diodes gotta be carefull not to pull the pads up!
yeah you dont want to be damaging the pads, just use light pressure when crushing the component, it doesnt take much pressure with them being tiny..
In the USA it is illegal to use a ham Radio on a CB frequencies
Pushes less than 1 watt on any extended frequencies 👎🏽
Pushes less than 1 watt on any extended frequencies 👎🏽
Will it transmit on GMRS freqs like 462mhz? I just did the mod but it quits tx’n at 457mhz and up
Can ANYONE answer this?
@@DontM8-__- it won’t. I did the mod and it only will TX up to around 457 mhz. If you have another radio close by monitoring gmrs and you are transmitting on same freq after mod you will hear it on other radio but I think it’s coming from the portion of the radio that hasn’t went thru the amplification circuit yet. With a watt meter you will see there is virtually no output power on gmrs. Maaaybe .01watt.
Everyone else I have found is having the same results after the mod.
Dang thank you for the heads up!!
@@DontM8-__- No problem buddy. Still works on 11 meters and I think Mars freqs.
@@tracym427 Do you know what the expanded TX freq ranges are for all the bands? I can't find anyone who's listed it. Interested in MURS like 154.6
Why would they not enable this out of the box?
Cheers matey , not sure I would be confident enough to take a chance messing with the 705 inners, but was good to watch, I’m literally back to radio this year, used to have a CB in the 80s, an old maxcom 4e lol, got my ham licence in March and got a bit bored with Ham so bought a Randy 3, just need to get an antenna outside , daft question coming up, could I use a mag mounted antenna in my loft, I wanted to buy the Sirio 5000, would it work? I’m sure the SWR would be all over the place, I almost pressed the buy button earlier but held back, all the best mate
Right, so hold fire on the sirio, it'll never work great in the loft unless you get really creative and make a massive groundplane or loads of radials underneath it, mobile antennas are groundplane antennas so they need a really good groundplane. The best sort of antenna for cb is a 5/8 wave vertical 30ft above the ground. Yeah it's gonna be big but that's just how it is! Alternatively the sirio boomerang on a pole on the ground or mounted at gutter height (or higher) is a smaller option that still works well.
Cheaper option is a wire dipole from ebay for 11M on a 10M telescopic pole from amazon on a heavy parasol base! A lot of CB action is on SSB but there is activity on FM, you'll likely need an amplifier too as everyone runs a bit of power these days to get over the noise! I'll do a video on all this soon!
@@andykirby , top man, thanks for the response Andy, so glad I held back from buying, I’ll look out for your video , all the best mate
Hey Guys ! Keep cool ! ....
Very usefull video before opening the 705 to get it TX .... on 60M as well, if you don't like CB !
Curiously It doesn't from standard.
Thanks Andy.
Great video Andy, CB is where I met my wife and long term friends, back in the day.
That whip antenna needs a counterpose wire as the 705 is not an HT.
South coast (Brighton - Worthing ) is almost non-stop on the 19 too
Hi Tony...G7HFS
🎉🎉new drinking game🍺🍺🍺
Every time Andy says “Basically” take a shot, I’m currently in hospital with alcohol poisoning and the doctors say my liver will never recover 😂
On a serious note another fantastic video Andy and great to see CB’s coming back in to fashion.
haha! yeah I normally edit a few "basically's" out! hope you are well mate.
@@andykirby don’t edit them out this is going to be a new trend 😂 yea I’m all good thanks Andy, currently in New Caledonia in the South Pacific building a crane.
Multifaceted Andy, takes me back to AM radio back in the day, 2..5 2..5 copy, roger dodge
How does that antenna perform on the other upper ham bands like 10, 6 ,2 m?
Passed my foundation nearly 4 years ago and I’ve never keyed up on the amateur bands let alone made a contact 🙈🙈🙈🙈🙈🙈
Why not???
@@ben2e0omr I can’t get my head around it mate, I’m horrendously mic shy, I think it’s also the formality of a amateur radio too
@@ben2e0omr I even gave all the equipment away that I had at the time, an icom 756 pro3, an icom 7000, a yeasu ft900, plus a shedload of other gear
@@benspeedschannel888 I was like that too, just forced myself to do it. Like with anything you're anxious about you can either force yourself to do it or remain scared forever.
Great video Andy. Ignore the negative comments below from the disgruntled & uneducated. Keep on enjoying the radio hobby on all bands including cb radio. Cheers.
Does the maple leaf as your posting name indicate you're in Canada?
Does this unlock all frequencies for transmit?
i would love to know
Love the radio Andy , but won’t be doing mine.
Started on CB in Austrailia in 1976 handle is Bushranger, came back to the U.K. in 1980 talking all over the world from Dartmoor
nice! I was on a bit later around 1990 when it had its second wind!
ALWAYS Awesome stuff from Andy Kirby , cool mate
I think i will keep my ic705 as ham only i got some old fm cb's but its dead up here😊
All My Ham Radios have no Mods,
Video is mirrored...everything is backward!!!😱👎
Yeah, something to do with the phone settings.
Must have money to burn butchering that expensive radio knob
Don't be a jealous little b**ch
Unscrewing those M3s in reverse image just looked so wrong Andy :-)
Great video. Why did you post it in reverse image?
@@conchd Depends on the cell phone and which camera he used to make video. Lots of vids on YT are reversed, just that it is not always obvious.
Habe mal ein abo für dein video da gelassen.
73 Johann
The website is now down… it’s due to Icom not being happy with modifications
I doubt its that, the webmaster probably didn't pay the fees😅
Cutting edge videos. Enjoying it.
Do you know if the 705 can transmit on 466.0000? They are business frequencies in US. Thank you.
Video mirrored?
I have to admit, I would be nervous as hell doing this to my IC-705 ! I can build kits with SMT. I really like your confidence tho and its very interesting. I think I'll keep to my CRT SS6900N for 10m and 11 meters.
I did it with a 706 scared the crap out of me
The last time I check channel 19 in the United States is at a frequency of 27.185 MHz. Back in the mid to late 1970’s I knew what the frequencies were for each of the 40 channels at that time!
Yeah I'm confused as well. 27781 is way out of CB land. 27405 is ch40.
So 27781 is even above free handers on 27555 area .
So Andy what's up wit dat man ?
@@denp54z Here in the United Kingdom the UK40 channel band plan is between 27.60125 to 27.99125 incrementing in 10 kHz steps. So 27.78125 mhz is UK channel 19.
@@pmr446 Learn something new every day!
Icom ic705 the best
Yes. And I hope for an even better successor with ATU, backlit keys, separate antenna sockets and built in FT8 and CW decoding. Best would be some kind of software plugins for several digital modes, also for the ones still to come.
My 705 shows some quirks when I use it with a directly attached whip. Obviously interference radiation from the display.
Works Nice ..👌
no need to de-solder .just use jewelers small flat head the diodes pop right off slide up under and just the slightest twist and there gone.I was done in like 10 minutes start to finish.
Ohh jeez!😅 the traces are so thin on these boards you have to be really careful. Glad it worked though.
Whats funny is the diode basically just fell apart with slightest pressure.I was more scared to try and use a soldering gun.Ive lifted traces with a iron before.What a mess..Thanks for the mod info though!!yes it works great.The 705 is awesome radio being battery supplied i can get some great DX being able to run without a power supply. It's the best LW DXer ive ever had for NDB hunting!!
@@andykirby
I like your Brummies accent, very british! Here in BC we have too many yankeee's influence! :D
u have more guts than me was interesting seeing dismantle.thanks
Awesome, you have and esk8 too. Good vid, I want to mod my 705, I already did it to my 7300.
The 705 is so much better for portable ops, I am thinking of getting the backpack just for skating around.. :D
73's N7URH
I use mini wire snips and just cut it with a vaccume running along side it...... diode will just shatter and all bits just get sucked up...... This stops the risk of any heat damade to the rest of the board and is the safest way......
Does this mod work on all models of the 705??? Japanese, European and US models?
Hi Andy, thank you for your working video. I need Zastone D9000 circuit diagram or schematics for unlocking. Can you help me pls?
Breaker breaker even though on ham radio of you say Break Break it means you have A emergency 😅 73’s 😊
Had a look inside my 705 which originally came from Icom U.K. and there is only one of the two diodes installed (the one in the corner)
Fishing for clicks may lead to you loosing your Amateur radio license. or are you an amateur Av-ant provocateur ?
No, the screws are not left-hand threaded. Parts of the vid are L-R reversed. The board closeup appears to be correct. But nice to see the insides of the '705! 73s, N2GX
This is were the x6100 shines. No need to take apart. Just reprogram and away you go.
Hi Andy , bit the same here , Amateur call and R1250RT ! 73 Andy
NICE! !📡🔊👋👀👍 #1122WINGNUT RADIO on the side ch 38 freq 27.385LSB
cool Andy I chat on the uk 19 quite often modded my xiegu g90 as well im . 47ct02 , maybe chat with you one day Cheers
Hi Andy did you wide band the 891 your self if you did any information would be appreciated thanks.paul
Great video andy.also like the trance music you play👍
Hi Andy, thanks for the videos. Would a mod like this work on the Icom ID52e?
Here in OZ we so needed to have CB UHF 470-480, what was Icom thinking..
Mirrow image is distracting. Are there any digital CBs?
I'm thinking about getting one of these for my truck. How are you liking it? Do you feel like there is a better one for my truck ?
Andy I have seen your utube videos and have thought about ebikes what belt driven as chains are short of supply at the moment v belts to drive all bikes
Thanks video 73’ EA3HSL
So 27.781 is channel 19? Around here channel 19 is on 27.185
Love how you're holding the thing like some WWII HT. :)
Why is this not a standard switched on?
Will the mod allow am trancieve on 121.5mhz?
Does this also allow you to use the US GMRS bands? Thanks!
Luv your keyboards dude sherweeet
I'd love to get my hands on them
I did this on a 706 just flicked it with the soldering iron
What about a COBRA 200GTL DX With 100W of RF.