I had the same issue but it was a fault on the -15v line. Tracked it back to the dodgy loose pad on the mains input board. The grey wire from the secondary of the traffo was hanging on, beefed it up with a mod wire and buzzing is gone.
Hi great video. I have an Azur 651R, I with no standby LED. Fuse is no longer blowing after changing the burnt choke coil and bridge rectifier. Where should I start searching to get a standby LED next?
Is it really true that CA currently is using low quality capacitors in their current units ? I heard this several times - the same for NAD, Musical Fidelity etc.
Hellow can you help me and tell me witch one condesator are from high and middle tone i bot my cambridge few days ago and when i am taking to right maximum high tone .... its a little diffrnts betwin when it is on middle .I want changing this condesation ..... and what condesation i must buy .... ?
Hi - great work friend. I've got a 640a V2 where the input fuse on the power supply keeps blowing. Do you have any idea on what could be the problem or where i need to check? Any help would be greatly appreciated. Thanks!
@AllAduiFixup mam ten sam wzmacniacz, problemem jest występujące buczenie głośników, niezależnie od wybranego wejścia i poziomu głośności. Na słuchawkach i preout taki efekt nie występuje. Na wyjściu nie ma DC. Wymieniłem wszystkie elektrolity poza niektórymi bipolarnymi. Nic to nie pomogło. Tranzystory mocy sprawdzone i są ok. Pozostaje chyba tylko jakiś problem z masą lub uszkodzenie jakiegoś tranzystora sterującego. Jakieś sugestie?
Cześć czy możesz mi pomóc lub doradzić lub moze jestes z Warszawy to mógł bym porównać swojego cambridge 640 (kupiłem wczoraj nigdy nie miałem cambridge) bo mam mało średnich tonów i wysokich czy wiesz które to są kondensatory od nich jeśli masz facebooka czy mozesz podac by sie lepiej pisało albo ja podam i bys mnie znalazł ... ?
Greetings I have the same model of amplifier and two problems. First is like yours with power button and the second major problem is with left speaker output. When amp is turned on and song is playing there is no sound on left speaker or sometimes rarely sound comes in spikes. But after some time playing songs left channel starts to running normally. Do you know what could be a problem?
Great work. I have one. The volume pot was a bit crackly but as I've used it, it seems to have fixed itself. Bit of dust probs. Lovely amp.
I had the same issue but it was a fault on the -15v line. Tracked it back to the dodgy loose pad on the mains input board. The grey wire from the secondary of the traffo was hanging on, beefed it up with a mod wire and buzzing is gone.
Hi great video. I have an Azur 651R, I with no standby LED. Fuse is no longer blowing after changing the burnt choke coil and bridge rectifier. Where should I start searching to get a standby LED next?
3:43 is that the toroid power supply on the left ? It looks small but why is it power hungry with power consumption 600 watt.
Is it really true that CA currently is using low quality capacitors in their current units ? I heard this several times - the same for NAD, Musical Fidelity etc.
Hellow can you help me and tell me witch one condesator are from high and middle tone i bot my cambridge few days ago and when i am taking to right maximum high tone .... its a little diffrnts betwin when it is on middle .I want changing this condesation ..... and what condesation i must buy .... ?
Hi I have the same amp with the exact same problem. Could you tell me the spec of the capacitor required as I couldn’t quite hear what you said
@@ClaytonInman hi . It's not just capacitor . Spec you can found in service manual
Hi - great work friend. I've got a 640a V2 where the input fuse on the power supply keeps blowing. Do you have any idea on what could be the problem or where i need to check? Any help would be greatly appreciated. Thanks!
Hi thanks i think its 4 or 5 fuses on board so let me know if is one of this
@AllAduiFixup mam ten sam wzmacniacz, problemem jest występujące buczenie głośników, niezależnie od wybranego wejścia i poziomu głośności. Na słuchawkach i preout taki efekt nie występuje. Na wyjściu nie ma DC. Wymieniłem wszystkie elektrolity poza niektórymi bipolarnymi. Nic to nie pomogło. Tranzystory mocy sprawdzone i są ok. Pozostaje chyba tylko jakiś problem z masą lub uszkodzenie jakiegoś tranzystora sterującego. Jakieś sugestie?
Cześć czy możesz mi pomóc lub doradzić lub moze jestes z Warszawy to mógł bym porównać swojego cambridge 640 (kupiłem wczoraj nigdy nie miałem cambridge) bo mam mało średnich tonów i wysokich czy wiesz które to są kondensatory od nich jeśli masz facebooka czy mozesz podac by sie lepiej pisało albo ja podam i bys mnie znalazł ... ?
Greetings I have the same model of amplifier and two problems. First is like yours with power button and the second major problem is with left speaker output. When amp is turned on and song is playing there is no sound on left speaker or sometimes rarely sound comes in spikes. But after some time playing songs left channel starts to running normally. Do you know what could be a problem?
Thanlks i think you need to check if its any dc voltage on output if ots go to protect mote but you need to check at output resistors
Thank you for sharing. My power button motor has a buzzing noise. Like keep running itself. Can I disable it?
Hi im not sure what do you mean ? What power button motor is?
@@FPV.ExploreScotlandsorry I mean volume button. for 640a, ver.2, the volume is powered with a motor.
@@tianshili9052 just if you can do a video and send to me
@@FPV.ExploreScotland photos.app.goo.gl/QMS7cEQHFqb2ydsT8
@@FPV.ExploreScotlandhere's the link, the motor is driving the bottom down automatically. ua-cam.com/video/dLoxNCQRRpQ/v-deo.html
I can hear pink Floyd playing
Yes it is
poor noise cancellation ability ?
the problem was with the capacitors
How is the authenticity of this product?
@@taipinfinancebattery395 I do not understand what you mean
How is its sound reproduction?
@@taipinfinancebattery395 I can say that it is very good.