@@AKTheSavage Hi, The transportation time of the light whip depends on which warehouse the inventory is located in. Ship to USA address, the transportation time of the American warehouse is expected to be within a week. The warehouse in China is expected to take two weeks. And Ship to Canada, it often needs 15-20days.
They break contact in the led strip because they either spin or when they bend it beaks connection inside the led strip. 7 of mine have all broken connection at the same spot. I purchased the Kemimotos and switched to Nilights. They have a way better connection, a taller quick connect. I also made an extra loop of wire that can get pulled on without pulling on the wires or led strip. Kemimoto whips are Junk!!
Hey Haifa if you will click the link in the description of this video it will let you put your address in it and see what the cost is. And you can find the rock lights that are above the wheels on Amazon they are made by mictunning
Thats right!! I just did the wire nuts for a quick means of connection for illustration purpose. Butt connectors and some super 88 tape is what I like to use normally
I had a pair of four footers, didn't last but three weeks and broke. Mine we're not flexible,. at all. I did call Moto they did replace them I got to give him that!!!
They break contact in the led strip because they either spin or when they bend it beaks connection inside the led strip. 7 of mine have all broken connection at the same spot. I purchased the Kemimotos and switched to Nilights. They have a way better connection, a taller quick connect. I also made an extra loop of wire that can get pulled on without pulling on the wires or led strip. Kemimoto whips are Junk!!
Thanks for reply but still confused. Messaged kemimoto about the module not being in with the whips and their response was the one l purchased didn't need the module and was told just to hook it up like l normally would. My remote was the controller. I order them after watching your video and it was the Black Friday discount. The whips and 2 mounts
@@RealTalkPowersports that was awesome to see your video featured there! Great stuff! I use a lot of your videos as a guide! They've been extremely informative and helpful! Hey np! Thanks for making so many great videos! 🙂
I tapped mine into my buss bar. They work fine but I cannot run the set on 1 remote. I did not install a switch. I only use the remote controller that was provided. Also when I put them on red; one of them is like a faded red. Any ideas I would appreciate. Thank you sir
@@johnduran4949 this set was a pair wired into the same control box.. thats the only way one controller will work. And as far as the red discolor im not sure.
This doesn’t really pertain to this video but just wanted to ask a question about wheels. I’m looking at just getting some 30x9 and 30x11 cryptids just the tires for my cforce 800 do you think it will have any clearance issues on the stock wheels?
@@33Mettal I would just drill a hole where ever i wanted them to be on the back edge of the rear rack. If you go with this kit.. you will need to drill with a 1/2" drill bit
I got these whips for my dad. Didn’t come with rf controller. Doesn’t work without it and now they’re trying to say it’s integrated into the light itself. And they won’t send me one. Don’t seem that reputable of a company in my eyes
@@yuknasty9199 thats weird.. because the wires going from your power source should be running to a little black box and the black box is the controller and brains of the operation and from the black box it runs to the whips
@@RealTalkPowersports yeah this is the problem I'm having right now. They even showed me a screenshot of that controller box in your hand in the video and said I have to buy it, it's not included 😑 by the way, my single whip light does work without it- the remote works, but I can't for the life of me get it to do the complex patterns that yours does in this video. That's what I really really wanted- those multi independent traveling patterns from the bottom, and all those separate little pieces simultaneously split apart, etc. looks freakin amazing and that's what I'm after 😞
What is your warrantee on these? I bought the, LED Whip, set of two for $129 earlier this year, and they both broke from branches. One of them came completely off, leaving my LED Strip, hanging there. Luckily guys behind me picked it up. The other on stopped working 1/2 way up. Now I need to buy a new set. I have yet to decide.
Sxs owners, stop installing your whip on rear bottom frame, install it on the roof, you get additional 2ft from the top.. fml.
I need to be able to fit on my garage atleast 😂
Straight forward an awesome explanation!
Thank you for your review! Helped me make my purchase
Glad I could help!
@@RealTalkPowersports how long did you wait for shipping roughly?
@@AKTheSavage Hi, The transportation time of the light whip depends on which warehouse the inventory is located in. Ship to USA address, the transportation time of the American warehouse is expected to be within a week. The warehouse in China is expected to take two weeks. And Ship to Canada, it often needs 15-20days.
They break contact in the led strip because they either spin or when they bend it beaks connection inside the led strip.
7 of mine have all broken connection at the same spot.
I purchased the Kemimotos and switched to Nilights. They have a way better connection, a taller quick connect. I also made an extra loop of wire that can get pulled on without pulling on the wires or led strip. Kemimoto whips are Junk!!
Blake: flags make you very visible
Us: as if the LED rods don't
🤣🤣🤣🤣🤣👌🏻
Hahaha thats right.. i won't be running the flags myself.. but i had to talk them up as a feature.
What is the price for a pair of lighting poles and also for the lighting that is above the wheels, including delivery to Eretz Israel - thank you
Hey Haifa if you will click the link in the description of this video it will let you put your address in it and see what the cost is. And you can find the rock lights that are above the wheels on Amazon they are made by mictunning
dam dude you keep making me buy shit lol thanks for the new shit .
Great video, but by all means get you some butt connectors or soldering connectors as opposed to those wire nuts, especially in the utv environment 👍🏼
Thats right!! I just did the wire nuts for a quick means of connection for illustration purpose. Butt connectors and some super 88 tape is what I like to use normally
Cual es la app para controlarlas con el celular???
Bottom line is they are gay.
Horrible company!
would the whip lights get brittle and break off overtime or stay as strong and as good looking as new?
I had a pair of four footers, didn't last but three weeks and broke. Mine we're not flexible,. at all. I did call Moto they did replace them I got to give him that!!!
They break contact in the led strip because they either spin or when they bend it beaks connection inside the led strip.
7 of mine have all broken connection at the same spot.
I purchased the Kemimotos and switched to Nilights. They have a way better connection, a taller quick connect. I also made an extra loop of wire that can get pulled on without pulling on the wires or led strip. Kemimoto whips are Junk!!
What size is the bolt on the end of light ?
чот на соплях всё собрал...
How far can I drive on highway with this whip lights I have 5ft on my jeep wonder it's ok to go 65 mpg?
Do I need the led control modules to wire my whips up . I have 2 whips and 2 remotes but no modules came with my order
There should be a little black module box.
Thanks for reply but still confused. Messaged kemimoto about the module not being in with the whips and their response was the one l purchased didn't need the module and was told just to hook it up like l normally would. My remote was the controller. I order them after watching your video and it was the Black Friday discount. The whips and 2 mounts
When these bend like hitting a tree limb. Do they whip back far and hard? I’m nervous they may hit me in the head. Thanks for everything.
Helmet
@@09l806 still it can push your head forward are scare you.
Excellent video.
Are you interested in product test about UTV whip mount？
Haha Blake, this video is so good man! I just went to their website and saw this video featured there! You're famous! 😄😎
😅😁😄
Thanks.. but far from famous lol
@@RealTalkPowersports that was awesome to see your video featured there! Great stuff! I use a lot of your videos as a guide! They've been extremely informative and helpful! Hey np! Thanks for making so many great videos! 🙂
I just purchased gorilla whips
what size is the bolt on the buttom making sure i make the right size hole thxs
Hey does it come with Bluetooth remote like from an app ?
Do you happen to have a video on where you mounted your rock lights on the 950?
Is there anyway to install whip lights to an external battery
That’s exactly what I need
They are awesome!!
I don’t need it but now I want it
I'm gonna buy one thank you so much for the information
I tapped mine into my buss bar. They work fine but I cannot run the set on 1 remote. I did not install a switch. I only use the remote controller that was provided. Also when I put them on red; one of them is like a faded red. Any ideas I would appreciate. Thank you sir
John i know this pair is sold together and work off of one control box and one controller.. did you buy you 2 separately
Real Talk Powersports yes I bought them Separately
@@johnduran4949 this set was a pair wired into the same control box.. thats the only way one controller will work. And as far as the red discolor im not sure.
Thank you so much! I appreciate it! Will probably just buy a set instead of individual.
What about light bar on the uforce 1000
Can I put on my Subaru Impreza
Where there is a Will there is a way
Thanks Jethro Bodine
Can you use these for flag poles in atv parks?
This doesn’t really pertain to this video but just wanted to ask a question about wheels. I’m looking at just getting some 30x9 and 30x11 cryptids just the tires for my cforce 800 do you think it will have any clearance issues on the stock wheels?
Hey Joe that setup will work perfect with the stock wheels.. but i think the 30x10 setup would rub a little bit up front with the stock wheels
Who sell them ? Thank you
Did they come flexible? Just got mine and i can’t bend them at all
The spiral version is not bendable, the straight strip is...
Do that instalation tutorial on a cfmoto 850 please!
It may be a while before I can get another set. But it will be setup and wired just like in this video.
@@RealTalkPowersports just would like to know we're do you attach on the cf moto.
@@33Mettal to wire it or attach to the rear of the 850
@@RealTalkPowersports attach...
I can't see the best spot to do it in the rear part! Any hole adaptor for it?
@@33Mettal I would just drill a hole where ever i wanted them to be on the back edge of the rear rack. If you go with this kit.. you will need to drill with a 1/2" drill bit
Link is broken
no relay needed?
I got these whips for my dad. Didn’t come with rf controller. Doesn’t work without it and now they’re trying to say it’s integrated into the light itself. And they won’t send me one. Don’t seem that reputable of a company in my eyes
It should definitely come with the remote controller.. unless it is now bluetooth operated.
It came with remote but without the RF controller the remote has no way of controlling the lights
@@yuknasty9199 thats weird.. because the wires going from your power source should be running to a little black box and the black box is the controller and brains of the operation and from the black box it runs to the whips
Yeah I know. But they said the won’t give me one so I can’t use them. Just gonna have to get a different set
@@RealTalkPowersports yeah this is the problem I'm having right now. They even showed me a screenshot of that controller box in your hand in the video and said I have to buy it, it's not included 😑 by the way, my single whip light does work without it- the remote works, but I can't for the life of me get it to do the complex patterns that yours does in this video. That's what I really really wanted- those multi independent traveling patterns from the bottom, and all those separate little pieces simultaneously split apart, etc. looks freakin amazing and that's what I'm after 😞
Norm
What is your warrantee on these?
I bought the, LED Whip, set of two for $129 earlier this year, and they both broke from branches.
One of them came completely off, leaving my LED Strip, hanging there.
Luckily guys behind me picked it up.
The other on stopped working 1/2 way up.
Now I need to buy a new set.
I have yet to decide.
What module did he use to make the lights flicker like that
Sean i have actually swapped to Millar Light bar Twisted Whips..
Would it rattle to death on my 84 kxt tecate?
I didnt realise the whip had a computer. Maybe it might not work because it just runs off the magneto and that inconsistent power might not work
Finally getting one gonna see if it works hooked up to the taillight fuck it we ball