Servo drive type Ornithopter test 3 - - Huge tail wings: Lipo 3cell
Вставка
- Опубліковано 15 жов 2024
- Servo drive type Ornithopter test 3 - - Huge tail wings
巨大な尾翼を取り付けてみました。
7.4v定格のサーボに3cell(max12.6v)を接続してみました
サーボが破損するかと思いましたが、良好に動作しています。
驚きです。
I tried connecting 3cell (max 12.6 v) to the servo rated at 7.4 v
I thought that the servo will be damaged, but it works well.
It is a surprise.
サーボ電圧を上げたことにより、パワーアップになりました。
これにより、設定の見直し変更を行いました。
By raising the servo voltage, thrust was improved.
As a result, we reviewed and changed the settings.
その結果、私は期待どおりに操縦することができるようになりました。
As a result, I became able to steer as I expected.
Width : 1800mm
Length : 600mm
Total weight : 321g
Servo : SAVOX SV-1270TG
Lipo : 3cell 320mAh 25C (32g)
No other control servo 駆動以外のサーボは使用していません
Awesome idea 👍
Amazing! I want to build something similar, but I think that the servos will break after only couple of minutes of flight right? Is there a way to make the servo last?
I really liked the flying characteristics of this particular ornithopter! Do you have a build video, or still shots of the build?
Because the servo has been damaged, it is currently in the scrap state.
This type of servo has many expensive items, so in the future
There is no development plan.
@@y.takemura8488 could you estimate the total cost of all parts for this ornithopter? I plan to make the ornithopter like yours and want to estimate the budget.
Excellent work, could you please send the 3d Design of this ornithopter?
Beautiful.
thank you
That's a thing of beauty
Thank you
👍👍super
The best
Very Unique flapping characteristics!
Will you make one for me? Love to have one.
I'm sorry.
We do not make any production, sales etc.
Can anyone tell mee what is the material used for the wings and the wing skeleton
And also give hint about making this type ornithopter body design
nice work
Thank you
Hey..that's pretty awesome bird you got there.! What kind or type of service did you use for wing flaps (digital or analog) and did you take out the mechanism in a servos.?
Hello, i am an engineering student please provide me the detail of making this ornithopter please make a video of making this ornithopter. Please help me....
servomotor buena idea
Excellent.
Thank you
According to you which Ornithopter worked better
The one which you created using bldc or this one?
Excuse me, I do not know what “bidc” is.
In any case, the aircraft and controls are original.
I mean BLDC motor.
The details are put in the comment section at the bottom of youtube video, but the drive source is only equipped with two general servomotors.
In this video, the servomotor uses SAVOX SV-1270TG
Good
作りかたおしえてくれるならとてもありがたいな!
教えられる能力はありません。下記kakutaさんの記事を参考にしてみては。
www.rcgroups.com/forums/showthread.php?1737587-Kazu-Orni-Making-of-SnowyOwl
Sir , I'm planning to use tower pro MG995 high power servos for wings,and any other two for tail controls. Can u suggest any ardruino control units , battery pack for this type servos?
The MG995 servo is considered to have insufficient capacity such as speed, torque, and operating angle.
I do not understand the contents, but please do your best.
What is the minimum servo Torque required for this?
Do you have to flap your remote control?
I'm sorry, I don't understand the meaning of the question. (Use Google Translate)
@@y.takemura8488 彼は、羽ばたき動作を実現するために送信機のジョイスティックを手動で振動させる必要があるかどうかを尋ねていました。または、フラッピングアクションのオーバーライドと組み合わせた自動サイクリング信号発生器を使用していますか?
He was asking if you need to oscillate the transmitter joysticks manually to achieve flapping action. Or do you use an automated cycling signal generator mixed with overrides for flapping action?
I am asking this too!
@@gregmckeeswildthings9647 Another way to put this problem is how do you convert your throttle input in the remote controller into frequency of flapping.
كيف الحصول عليه
Please help me.....material i need
Great
Thank you
How do you control turns? By moving tail surfaces? Or by servo differential?
By moving the amplitude center position of the left and right wing
The tail which the whole body is fixed to the twist body also twists,
The ladder effect occurs and turning operation becomes possible.
@@y.takemura8488 You are a genius!
I like this toy
thank you
Sir please give me ideas about servo control and flight module
Are you planning to make a servo drive flapping machine?
The current servomotor is not recommended for the driving source of the fluttering machine because the torque is small and it is not powerful.
In my case, I am working because it is interesting how to make it fly with small torque, how to make it fly, and what kind of control you can control and make it fly as you think.
If you just want to skip the flapping machine, it would be wise to choose another driving method.
@@y.takemura8488 Thanks for your wise answer. But do you thing that some modern, digital, coreless, high-voltage and powerful (but I guess unfortunately expensive) servo can do the job? Thanks.
Nice
Thank you
Where could I get one like that
I do not sell it in particular.
y. takemura did you build it?
Except for purchased parts, it is handmade.
y. takemura wow you are pretty smart!!
y. takemura where you from? Japan?
I wil buy...
It is not selling.
@@y.takemura8488 sucsses friennd
Thank you