The scale of this kit looks ok. Detail of the feet looks good as well as the leg frames. I like the clear green parts on the legs. Waist unit is basic and I do see it uses the same joint from the exia. Panel lining on the shoulders is very neat. Glad to see they didn’t mess up the hands on this kit like they did with the MG Wing and Deathscythe. The was not impressed with the GN drive that came with Exia and I think it should have been better. The lights look very good form the torso unit.
This just convinced me to not put the seals in the chest :] also, thanks for the heads up about the NG 1/100 00 Gundam's LED not working ._. there goes my grand master plan, but I suppose its better to be disappointed sooner rather than later. Great review as always though.
Does the toe on the foot go as far as the toe on the Perfect Grade 00 Raiser or thats is as far as it goes? Just curious, because I like the foot articulation on the 00 Raiser.
Guys, I assembled the stand, but there seems to be no way to connect the part that you put under the Gundam to the stand itself. Do I need to buy an additional part.
![MG 00 Quanta (Part 3: Weapons) Gundam 00 Movie Qan[T] gunpla review](http://i.ytimg.com/vi/0-78SIkurtk/mqdefault.jpg)
![MG 00 Quanta (Part 3: Weapons) Gundam 00 Movie Qan[T] gunpla review](/img/tr.png)
![MG Gundam 00 Quan[T] Full Saber Review - GUNDAM 00 -](http://i.ytimg.com/vi/tSpgTFxxfow/mqdefault.jpg)
@vietsoldier01 that's the main quantum system. activated when the 2 gn drives connect and setsuna performs a trans am
I bought this model at my local hobby store and man its bigger in person, yay for wing zero style ears
Good thing about 00 kits is that parts don't fall off
@02Jc19 Yeah it's pretty odd especially when its set up for an LED
Funny how I got a flickering LED and looked again at the back and noticed that the back wasn't tightened enough. Tightened it and it was fine.
@spartanK42 i put on the fingers the best i can then i put on the white armor on the hands hope that helps
This is far more impressive than I thought! The pop out GN condensers is a great gimmick!!!
Good point, 00 gundam doesn't have much to complain about next to the double x.
The scale of this kit looks ok. Detail of the feet looks good as well as the leg frames. I like the clear green parts on the legs. Waist unit is basic and I do see it uses the same joint from the exia. Panel lining on the shoulders is very neat. Glad to see they didn’t mess up the hands on this kit like they did with the MG Wing and Deathscythe. The was not impressed with the GN drive that came with Exia and I think it should have been better. The lights look very good form the torso unit.
This just convinced me to not put the seals in the chest :] also, thanks for the heads up about the NG 1/100 00 Gundam's LED not working ._. there goes my grand master plan, but I suppose its better to be disappointed sooner rather than later. Great review as always though.
@zamora252 looks like i'll have to get another exia ignition mode to get the LEDs from it
the line between PG and MG Blur more and more with every model
@KiraXStrikeFreedom
The Qan[T] purges its armor during quantum burst.
Yeah all the MG 00 kits use the same kind of LED I think you can even use the head LED unit from the PG Strike Freedom
@jiggenthepkk hopefully the mg 00 raiser will be on the market on december
i like that you showed the innerframe
the 00 raiser mg is coming out... im saving money to buy it... to bad it only comes with 1 led but also comes with 2 condensers
@derricf Of course 00 Quanta because they ( Bandai ) fixed most of the loose parts from exia in kit.
Thats are some impressive articulation in legs.
Does the toe on the foot go as far as the toe on the Perfect Grade 00 Raiser or thats is as far as it goes? Just curious, because I like the foot articulation on the 00 Raiser.
7:18 It's the Green Lantern :D
But it's looking good, I'm thinking of picking this up soon, or maybe a different MG, haven't decided yet on which one.
i heard that some parts purged for the quantum mode does this have anything to do with the pop out condensers
This is tight. :)
So, if you plan to put the MG Exia's LED's into the Quanta, you don't want to put on the Quanta's seals on those areas?
Man, I had a lot of trouble putting the fingers on this kit.
@oiram1189 hobby wave is your friend, but MG quanta might be sold out, you can alway just put in your waitlist.
What luck for me. I got the exia Ignition with LEDs in July :D
I just noticed after watching the last episode of Gundam 00, 00 quan [T]'s body kinda looks like Reborns Gundam
@MrDirectorH All gundams even from the first series were designed to be turned into toys/models
weird... the blue area for my leg armour(the back) bounces back down... like there is a spring that pushes it down...
@rrobert184 how you out the awsome stiker?? pless make video i more understand if it's video...thx
QUANTA SYSTEM BABY! Thats why it pops up
just wondering can you get the lights at any local electrical stores ? or DIY stores?
Man,the popping condensers just scream "Quantum Burst Mode"
First...I'm getting an Exia Ignition...then a 00 Raiser (And the Seven swords conversion colorcast), then The Quan[T]
How...breathtaking...
Guys, I assembled the stand, but there seems to be no way to connect the part that you put under the Gundam to the stand itself. Do I need to buy an additional part.
@TheBlitzgundam because bandai prioritized the 00 gundam movie thats why..
dude..did the extra GN drive with LED come together with the gundam? or need extra money to get it.?
Got any approach for the light?Because I don't have MG Exia
:O i shall buy this .. sooon.. too bad it doesnt come with the extra gn sword. like the magazine issue for the 1/144 scale
wait, so what was the point of the condensers popping up?
i really hope the release the gn sword IV full saber for the mg 00 qan(t).
do you know where to buy LEDs from for the quanta
I lol at DX. But I really wish they release a mg of it. If not, at least a better version of 1/100
im getting kits now. which is better mg exia ignition mode or mg quanta?
why did bandai make the mg 00 quanta and not the mg 00 raiser first??? when do you think bandai will make a mg version of the 00 raiser???
@GaMeR9281 there's no need for him to make videos on how to build it cause you've got the manual...
Can you use a separately bought green LED?
can u change the exia gn drive with the OOQ drive??
the movie shows you the pop out feature
@fred888phil thanx...
@arif530 thanks for the info.
dammit....i originally hated the asymmetry of the hg kit...now, i have to buy this mg. the articulation is far too advanced to pass up... :)
@7kiku7honda7japan hey do you know who make video make of building 00Q head??/
what? it dose not come with the LED?
the innerframe looks cheap... or is it beacuse of the sleekness of quanta?
I really like the inner frame being shown. I think it's a good MG feature to show off
I would have got this without a second thought...if it came with those damned LEDs.
@7kiku7honda7japan i forget
lol at the end. poor double x
I kind wish they would make PG 00 Quanta.
hey rob i have the i mode exia and it fikers i guess it adds ti=o the effect but its anoying
Nevermind I get it, its just for the sword.
Mg 00 quanta or mg Gm sniper
@TheBlitzgundam thats not gonna happen this year, probably on summer of 2011
it sucks why cant bandai just include an LED for this kit :(
while i don't care much for this design, it looks like they will be using alot of it if they make a mg 00.
@CaramellDancerElite a little bit but to me this gundam looks better
@Shimimadara
stop compaining theres already a 1/100 and a perfect grade
how much you get this
?
you can buy 2 led lights for 8 bucks which is really not a lot compared to the cost of mg kits GOD people are whiny these days.
I just got an LED unit and 1/100 fully articulated hand, hahaha....
it mostly look like the PG 00 gundam
i'm so buying this xD