hello, I have a BMW F20 XDRIVE with ACC. and I changed the rack. I coded the VIN but I still have the ESP code, and the FSCs are rejected. Do you have a solution? i want to buy FSC THANKS
Hello, I have a BMW F20 prod. date 11/06/2012 (dd/mm/yyyy) with servotronic eps, recently bought a servotronic eps produced in 06/12/12012. Can i replace the old eps with this "new"? Is it possible to inject the fsc from mine eps into the “new” or do we have limitations regarding the production date of the new eps? Best regards.
Yes. You can inject your own original "repair" fsc, it will replace old one in older eps. I can get the repair fsc for you by vin and help with injecting remotely. (cable Enet needed)
I’ ve read in multiple forums that we only can do that if the donor eps is older than the one installed in car. Have you done already the opposite and the servotronic in the end works properly?
@@mrpigzzoid that is rigth - it is only possible if installed EPS (donor) older then original FSC date. in case when donor EPS had servotronic fsc code in it.
Thank you for your help. By the chance, do you know if changing the motor from mine eps to the donor we could make it work? Or we also need to move the torque sensor?
am i only one who recognized that vin from car and eps are different?
you are right. EPS checks vin inside FSC and vin of the car. it is not checking the vin written in the EPS itself
hello, I have a BMW F20 XDRIVE with ACC. and I changed the rack. I coded the VIN but I still have the ESP code, and the FSCs are rejected. Do you have a solution?
i want to buy FSC
THANKS
Hello,
I have a BMW F20 prod. date 11/06/2012 (dd/mm/yyyy) with servotronic eps, recently bought a servotronic eps produced in 06/12/12012.
Can i replace the old eps with this "new"?
Is it possible to inject the fsc from mine eps into the “new” or do we have limitations regarding the production date of the new eps?
Best regards.
Yes. You can inject your own original "repair" fsc, it will replace old one in older eps.
I can get the repair fsc for you by vin and help with injecting remotely. (cable Enet needed)
I’ ve read in multiple forums that we only can do that if the donor eps is older than the one installed in car. Have you done already the opposite and the servotronic in the end works properly?
@@mrpigzzoid that is rigth - it is only possible if installed EPS (donor) older then original FSC date. in case when donor EPS had servotronic fsc code in it.
Thank you for your help.
By the chance, do you know if changing the motor from mine eps to the donor we could make it work? Or we also need to move the torque sensor?
@@mrpigzzoid it is always better to install full used EPS all-in-one, not changing or dismounting something like motor etc. it could be painful often
Is anybody know if ESP on F25 can be programed to increase power assistance at high speed (70mph and up)
no
Hi, how can get the FSC code for F36 serries, for EVO map?
yes. easy. 2024-1 map available already
My E93's EPS change with a 2nd hand used EPS ZBnumber 6855892, is it can work with your e-sys?
No, E-Sys is engineering software for F- and G- series.
hello. have you used a used EPS, no VIN match?
It was used EPS. Properly programmed , encoded and activated after installation
@@andreisafonov8144
Ok.thanks. I'm working on a solution for fsc... I hope to have it soon. thanks for answering
used eps is turning too heavy
yes, when it rejects (or doesn't have) FSC for servotronic
how to coding with E93
Sorry, i am not familiar with E series.
where did you get it fsc code?
It is possible to buy it from my friend.
If it was in stock car - from 30eur (repair code),
if it wasn't in stock - from 400eur.