N54 Upgraded Oil Cooler Install - 25 Row G-Plus

Поділитися
Вставка
  • Опубліковано 10 гру 2024

КОМЕНТАРІ • 14

  • @drratt
    @drratt 4 місяці тому +2

    Thank you for the in depth install 🙏🏽

    • @Calvinm
      @Calvinm  4 місяці тому +1

      You're very welcome!

  • @2stocke9x
    @2stocke9x Місяць тому

    I have the same oil cooler, currently going to try to remove the 2 AN ends where they go into my thermostat. I have some 45 degree replacement fittings that I will try and push into the hose to hopefully have the 45‘s sitting flush. I recommend you try the same.

    • @Calvinm
      @Calvinm  Місяць тому

      Let me know how that works out. Currently my set up with the two 90’s coming out of the thermostat housing is not idea. The one closest to the rad fan rubs on the plastic fan cover. Had to make a little bracket to stop the rubbing. I was also thinking of getting a -10 extension for the driver side hose to put the 90 before the passenger side hose.

    • @2stocke9x
      @2stocke9x Місяць тому

      @ That worked out perfect. The 2 45’s in place of the 2 90’s are perfectly flush with no extensions or adapters. Spent all of 13$ on those 2 single 45’s.

  • @luisavellaneda2832
    @luisavellaneda2832 Місяць тому

    Can u make a video how to install that charge pipe? 🥲

  • @deivyleon409
    @deivyleon409 2 місяці тому

    One of the lines comes w a straight fitting .you vouldve used that side to hook up to the oil filter housing side and prevented the two 90s rubbing together .ask me how i know .

  • @Jeff-bw5kw
    @Jeff-bw5kw 3 місяці тому

    Great DIY, Calvin. So, how has it been working out? How's the overall quality? Any leaks? Any regrets? Have you tracked your car, and can say for sure the oil temps don't exceed 2xx deg. F when pushing it? Thanks again!

    • @AmgKevo
      @AmgKevo 3 місяці тому

      Mine kept leaking from the hose itself. Other than that it’s great

    • @Jeff-bw5kw
      @Jeff-bw5kw 3 місяці тому

      @@AmgKevo Where exactly was it leaking? Between fittings, or where the fitting is installed on the hose? Just wondering if this is a quality issue (I.e., cheap crap), or install problem. Thanks

    • @AmgKevo
      @AmgKevo 3 місяці тому +1

      @@Jeff-bw5kw from the hose itself where the seal that connects to the fitting into the oil cooler housing. Got a brand new hoses to replace it and it’s been fine ever since

  • @IccDani
    @IccDani 2 місяці тому

    do you need to add extra oil?

    • @dabigbadwolf5081
      @dabigbadwolf5081 2 місяці тому

      Yes, should be about half a liter

    • @dabigbadwolf5081
      @dabigbadwolf5081 2 місяці тому

      You can fill up the oil cooler before connecting it too.