I've lived out in the rural sticks all of my life. The little bit of exposure I've had visiting people out in the suburbs.... They can have that lifestyle. Thanks for the content
This was the best instructional for the install. I just put the same set on my 1200, even used the same language when I dropped an exhaust nut. Thanks for the great video dude.
Thanks for the no BS installation and for providing the torque values. I'm installing mine on Tuesday after work. Already have the old pipes and mounting bracket off so should be a breeze. Hope to see some more sportster videos coming from you good job man!
Had a softail with loud exhaust, just idled through neighborhood at night and no one bitched. After watching this video I am definitely going with these pipes.
Just got the install done on my 2018 iron 1200 these F$@%n pipes are loud as hell. The youtube videos don't make them sound as loud as they really are. I'll be getting the quiet baffles over the Winter for sure. The install went great except for the fact that everyone failed to mention that one of the mounting bracket bolts for the rear pipe needs to be inserted before tightening it down. The rear brake master cylinder is in the way so had to remove everything again to get it in place. Other than that no issues at all. Really happy with the Vance and Hines FP3 fuel pack. Fired right up and ran great with the short shots map. Smells a little rich but that's a good thing no burnt pistons from a lean burning stock map. Thanks again for your video makes me laugh every time I watch it.
@@Real_Josh_King i my research they do. I have had crotch rockets, dual sports and cruzers. Most people dont pay attention when they drive. If they can hear you they pay attention more, especially if your in their blind spot. If they cant see you they can hear you. Why do you think emergency vehicles have two sensory systems. Bright lights for visual and loud sirens for auditory senses.
@@rafaelpereira3028 because it changes how much air is being brought in and pushed out, the engine is tuned for the stock setup and won't run as efficiently until the ECU (or whatever its called on a bike) is reflashed to best use the changes.
Great video, I have a question for you, you reprogrammed or installed fuelpak, and if you didn't you didn't you had no problems with the performance of your harley
@@GIBro-mm5dj Okay I have one identical to yours, I'll just install the exhausts and I won't reprogram or install the fuelpak. Thank you so much for your advice I hope I look great like you,
your neighbor is lucky i am not his neighbor. id have a whole crew at 2 am doing burnouts in front of his house. i take pride in how careful I am pulling in late at night with my loud exhausts. I can pull in without waking up my family or neighbors. i specifically go out of my way to pull in at below 1200 rpm. 90% of the time I am able to pull in idling. sometimes a slight blip. I have only had one neighbor complain, that same neighbor had a straight piped c6 corvette and woke up the neighborhood several times with domestic violence calls and police showing up with sirens. he ended up getting kicked out by the landlord who owned that property. my neighbor right next to me, the one who is within feet of my exhaust, has said they dont hear me pulling in when they are asleep. i work late. i arrive 12-2 am every night. if a neighbor wants to complain, i will make their life a living hell.
Mate have too train those people you let live in your street LOL smile and wave .... yeah sounds great thought right ? Smile and wave, so what time you get up for work ?.... want a wake up call ?... I can do that cause that's just the kind of selfless stuff I like to do for my friends ...yeah . V&H do make a quite baffle but the difference is only a couple of bells below the standard . Great video thanks.
Me too, I never make a scene at night, out of respect, they should know I have a bike, especially a Harley. For those who come to protest daytime like the video, .45 will be the only answer he can get.
@@GIBro-mm5dj okay just wondering i am getting same exhaust, heard everyone saying use auto tune but I don’t wanna, how’s it run and if I don’t use the tuner what happens
Myself was wonderin' if it's ok to Slap your neighbor in the USofA is he's Karen's husband, boyfriend, partner or dog... Here in NZ it is legal :-) LOL (pun intended)... Kidding aside, your bike sounds like heaven to me dude! Awesome DiY! You nailed it mate!
I've lived out in the rural sticks all of my life. The little bit of exposure I've had visiting people out in the suburbs.... They can have that lifestyle. Thanks for the content
This was the best instructional for the install. I just put the same set on my 1200, even used the same language when I dropped an exhaust nut. Thanks for the great video dude.
Man u deserve a medal 👏 u didn't annoy me like others. U just showed what's necessary
Just trying to keep the peace.
you are a lot nicer than i am. i would have laughed in that guys face and told him maybe he should move to a cabin in the woods.
Love thy neighbor right?
The ad lib commentary is golden!!!! 🤣🤣🤣
Reminds me of myself whenever I do a DIY project.
Thanks for the no BS installation and for providing the torque values. I'm installing mine on Tuesday after work. Already have the old pipes and mounting bracket off so should be a breeze. Hope to see some more sportster videos coming from you good job man!
Had a softail with loud exhaust, just idled through neighborhood at night and no one bitched. After watching this video I am definitely going with these pipes.
I see you neighbor Karen's husband ken is tripping over your badass exhaust 😂🤣
Karen's husband, that's badass
Just got the install done on my 2018 iron 1200 these F$@%n pipes are loud as hell. The youtube videos don't make them sound as loud as they really are. I'll be getting the quiet baffles over the Winter for sure. The install went great except for the fact that everyone failed to mention that one of the mounting bracket bolts for the rear pipe needs to be inserted before tightening it down. The rear brake master cylinder is in the way so had to remove everything again to get it in place. Other than that no issues at all. Really happy with the Vance and Hines FP3 fuel pack. Fired right up and ran great with the short shots map. Smells a little rich but that's a good thing no burnt pistons from a lean burning stock map. Thanks again for your video makes me laugh every time I watch it.
Thanks for the vid! You gained 10 extra views from me watching it back and forth as I installed mine.
Awesome dude
Wow. Nice neighbor. It’s not even 8pm yet.
“Come on you BITCH!!” - sounds like my kinda mechanic work
I love my ShortShots! If your neighbors think they are load now take the baffles out :D
Hahaha fuck yeah 🤘🤘
😂😂😂
You serious.... Guess I'm gonna have some fun stopping by with the victory. lol
Loud as hell.
Me everytime I have to pick up a wrench 4:13
igotthis 😂
yup
What's louder vans and Hines or screaming eagles?
Wow that was quick
Im upgrading my iron to the stage 1, after remapping how much does the fuel consumption increase?
Never noticed a change. You should be within a mpg or 2.
Great video! Loud pipes save lives!
Research shows that’s not really accurate.
That being said, loud pipes sound better though.
@@Real_Josh_King i my research they do. I have had crotch rockets, dual sports and cruzers. Most people dont pay attention when they drive. If they can hear you they pay attention more, especially if your in their blind spot. If they cant see you they can hear you. Why do you think emergency vehicles have two sensory systems. Bright lights for visual and loud sirens for auditory senses.
Just found your channel, love it ! Subbbed
Sounds great
Wow you need to either get out of that neighborhood or show your neighbors what do you think of them!
I just try to keep the peace. Throttle down until I am off the block.
I’m sorry but do you need to tune the bike after putting on the exauhst?
It is highly recommended. My bike ran a bit rough before the tune.
you have to install fuel pack fp3 ?
No, but you should tune the bike after you change the intake and exhaust
@@GIBro-mm5dj why?
@@rafaelpereira3028 because it changes how much air is being brought in and pushed out, the engine is tuned for the stock setup and won't run as efficiently until the ECU (or whatever its called on a bike) is reflashed to best use the changes.
Does the kit come with new gaskets?
I got mine used so I can't confirm. Worst case, the gaskets are like 10 bucks on Amazon.
Great video, I have a question for you, you reprogrammed or installed fuelpak, and if you didn't you didn't you had no problems with the performance of your harley
Nope, runs great
@@GIBro-mm5dj Okay I have one identical to yours, I'll just install the exhausts and I won't reprogram or install the fuelpak. Thank you so much for your advice I hope I look great like you,
@@GIBro-mm5dj Last question, the chek engine is active on your bike or not
Brother that torque you used paw the screws of the heads helps me please is the only thing I need to tighten
This guy reminds me so much of David Wallace from the office
Thanks
Thanks
Is this with the baffles or with out the baffles
Baffles are in
Did you notice a difference in the Torque/Power?
Nah, just lots of sound.
your neighbor is lucky i am not his neighbor. id have a whole crew at 2 am doing burnouts in front of his house. i take pride in how careful I am pulling in late at night with my loud exhausts. I can pull in without waking up my family or neighbors. i specifically go out of my way to pull in at below 1200 rpm. 90% of the time I am able to pull in idling. sometimes a slight blip. I have only had one neighbor complain, that same neighbor had a straight piped c6 corvette and woke up the neighborhood several times with domestic violence calls and police showing up with sirens. he ended up getting kicked out by the landlord who owned that property. my neighbor right next to me, the one who is within feet of my exhaust, has said they dont hear me pulling in when they are asleep. i work late. i arrive 12-2 am every night. if a neighbor wants to complain, i will make their life a living hell.
just took stock exhaust off my 2019 883 and all bolts were loose
Yeah, I was shocked on how loose they were.
Mate have too train those people you let live in your street LOL smile and wave .... yeah sounds great thought right ?
Smile and wave, so what time you get up for work ?.... want a wake up call ?... I can do that cause that's just the kind of selfless stuff I like to do for my friends ...yeah .
V&H do make a quite baffle but the difference is only a couple of bells below the standard .
Great video thanks.
Nice sound, I'll don't care so much about neighbours.need to compromise the fact that you are riding an Harley-Davidson.
Me too, I never make a scene at night, out of respect, they should know I have a bike, especially a Harley. For those who come to protest daytime like the video, .45 will be the only answer he can get.
Did you have to use auto tune ?
Nope, have not tried it.
@@GIBro-mm5dj okay just wondering i am getting same exhaust, heard everyone saying use auto tune but I don’t wanna, how’s it run and if I don’t use the tuner what happens
Yes Sir. My 07 with Vance and Hines chrome shortys are the best sound ever even over Rush pipes on a 1200 Sportster low
O boy.lol.how was ur summer?
Great, just idle down on my block.
Beautiful sound!
Hahaha 3:27 and 4:16 that is every guy every time he works on a car or bike. Something always makes you say these two things 😂
That's crazy. My neighbor starts his Harley at 4 AM and it never wakes me up. People wanna bitch about something.
Let em bitch lol sounds great 👍 you know that neighbor wants one now
Holy shizzy, your on it for a few minutes and there crying already, it’s still daylight for Pete sake. Time to take the baffles out
What did he say I have to know
You know what you can say to ur neighbour. 👆
.45
Myself was wonderin' if it's ok to Slap your neighbor in the USofA is he's Karen's husband, boyfriend, partner or dog... Here in NZ it is legal :-) LOL (pun intended)... Kidding aside, your bike sounds like heaven to me dude! Awesome DiY! You nailed it mate!
Screw the neighbor. It’s a great sound and you should enjoy it
Go purchase a box of foam earplugs and hand them out to your neighbors. Just tell them "good lookin' out..."
lol your neighbor is a pansy and has no say to tell you your bike is too loud if it was my neighbor id idle my bike in front of his house
Oh you want to complain because it's too loud?? I'll make sure I drive past your house at all hours then..
Neighbor is right. Anyone with those Moron&Hines pipes is an idiot that lacks attention.
@@chrisbloodshoofd ok little girl 🤣🤣🤣🤣
How is it going with your neighbours? I preemptively went out and bought beer and wine for all my neighbours...... eeeeeh.
Loud pipes annoyed neighbors Harley no helmet America fuck yeah
Gah i hate horrible neighbours! They make life crap!!!
He said tourqed 😂😂
Let them yell all they like, who cares
If my neighbors complain about any of my bikes on daytime, I'll show my .45, that's answer.
Dude step out of the car and face me like a man if you have a "request".
Keep riding and crank your bike up. You paid for it and don't let people tell u how to live ur life. It's not a HOA Subdivision
is the stock air filter high flow ?