Hyundai I10 full service with basic tools(Detailed)

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 62

  • @prince_kingdomm
    @prince_kingdomm 5 років тому +6

    Please make video on Gearbox oil change for i10

  • @ganamaran
    @ganamaran 5 років тому +3

    Nice job, good motivation like chrisfix, please add spec of the consumables. Thanks

  • @Soulenergy31
    @Soulenergy31 5 років тому +3

    God bless u bro! Thanks for such an informative video

  • @ingalway
    @ingalway Рік тому +1

    Excellent video. Thank you.

  • @ayushmanmukherjee7556
    @ayushmanmukherjee7556 5 років тому +2

    Great video! Very detailed and informative.. keep up the good work!
    And I had a question!
    Hyundai recommends 20w40 or 20w50 mineral oil from Servo in Santro Xing (2005)
    So my question is should I go with 5w30 synthetic or just stick to the manufacturer's recommendation?

    • @diyguy7378
      @diyguy7378  5 років тому

      Please follow what is written in owner's manual.
      Regarding oil grade, it remains the same whether its synthetic or mineral oil.

  • @sandysutb
    @sandysutb 5 років тому +1

    Very well explained and informative video. Thanks

  • @moguaii
    @moguaii 4 роки тому +1

    Thanks from Europe

  • @yogeshjaiswal4111
    @yogeshjaiswal4111 6 років тому

    Very well explained process from an expert .

    • @diyguy7378
      @diyguy7378  6 років тому

      Mr jojo 007 , Thanks for appreciating my work....

  • @inaciocfernandesfernandes7890
    @inaciocfernandesfernandes7890 5 років тому +1

    Informative video nicely explained thanks for the video

  • @رضوان-ك7ط
    @رضوان-ك7ط 2 роки тому

    جزاك الله خيرا وبارك الله فيك

  • @briananderson6316
    @briananderson6316 6 років тому +2

    Can you tell me which Spark Plug Hyundai recommend for the 2010 i10 with the 1.1 engine please.

    • @diyguy7378
      @diyguy7378  6 років тому +1

      You can use Bosch or NGK

  • @Lebethu
    @Lebethu 7 місяців тому

    Thank you

  • @economics1998
    @economics1998 5 років тому +2

    very nice video. where you got Hyundai
    genuine spares.

    • @PlayJewel
      @PlayJewel 5 років тому +3

      economics1998 there are many shops dedicated to selling genuine hyundai parts. Or u can buy online from websites like boodmo.com

    • @economics1998
      @economics1998 5 років тому

      @@PlayJewel Thank you

  • @shivakumar-ld4tn
    @shivakumar-ld4tn 5 років тому

    Namaste, What is the NGK sparkplug no,. For 1.2 kappa engine.

  • @adrianbadea1179
    @adrianbadea1179 4 роки тому +1

    How to change the air filter for clima? 🤔🙄

  • @tnamen1307
    @tnamen1307 5 років тому

    Please show how to check resistance on spark plug HT cable wire hyundai i20???

  • @briananderson6316
    @briananderson6316 6 років тому +1

    Nice video good work 👍🇬🇧

  • @sharatkumar2671
    @sharatkumar2671 8 місяців тому

    What is the size of oil filter wrench cap ?

    • @diyguy7378
      @diyguy7378  8 місяців тому

      Hi, I don't see any size defined on socket, what you can do buy filter from auto shop and take that to tools shop and ask for socket to open it.

  • @hiteshkharbanda1527
    @hiteshkharbanda1527 4 роки тому

    How to check coolent in Hyundai i10
    Bcz Coolent Box Mouth is very small
    So how can we guess about the same
    Pls reply

    • @diyguy7378
      @diyguy7378  4 роки тому

      Coolant level is clearly visible in container check in day time, to check quality use screwdriver and insert it in box, coolant should be green in color.

  • @omkarbhambure92
    @omkarbhambure92 3 роки тому

    I am having same car but in this the rpm is high how to. Reduce it tell me

    • @sujitdas2855
      @sujitdas2855 3 роки тому

      Get throttle body cleaned with idle actuator...that should solve the problem, if not than get the sensor voltage checked, for i10 it should be between 3.19 to 3.21volt, the voltage can be adjusted easily from the sensor, just need to unscrew two screws of sensor adjust it and tight the screw back...though a multimeter is required to check the voltage...for better clarity refer UA-cam..."idle actuator cleaning of i10" and you will get various videos..

  • @sameer9446
    @sameer9446 4 роки тому

    Very good vedio bro

  • @jaywest7479
    @jaywest7479 5 років тому

    Is it always the good to use the old oil on the seal

    • @diyguy7378
      @diyguy7378  5 років тому

      Yes, no issue in that. I don't want to use my hands in new oil 😀

  • @briananderson6316
    @briananderson6316 6 років тому

    Thanks for your reply 👍

  • @honorplay4631
    @honorplay4631 4 роки тому

    Good job bro

  • @bankniftytommorow
    @bankniftytommorow 6 років тому +1

    Sir please make the video on coolant change of same car (i10)

    • @diyguy7378
      @diyguy7378  6 років тому

      Dear, I had flushed coolant 2 years back only, will check if change is required will definitely change it and upload video as well.

    • @bankniftytommorow
      @bankniftytommorow 6 років тому

      @@diyguy7378 Ok sir ji.

  • @GauravSingh-bs8en
    @GauravSingh-bs8en 4 роки тому

    Nice one parformas Yaar

  • @briananderson6316
    @briananderson6316 6 років тому

    Where is the MAP sensor located and should it be cleaned also ?

    • @diyguy7378
      @diyguy7378  6 років тому

      Hi,
      It's on throttle body, you can clean it using STP carb spray cleaner.....

  • @rahulbadgujar9918
    @rahulbadgujar9918 5 років тому

    What is ur tyre size... Do they affect handling

    • @diyguy7378
      @diyguy7378  5 років тому

      Its 175 70 R13, handling would be better but you have to compromise with average.

  • @kalimyasin9016
    @kalimyasin9016 3 роки тому

    Aur petrol car ka sirvish dekhayye

  • @makwanasunil79
    @makwanasunil79 4 роки тому

    I10 car 80 ki speed hone par vibrat karti hai, kyaa problems ho sakta hai

    • @diyguy7378
      @diyguy7378  4 роки тому

      Car ke tyre check karwao, tyre ful gaya hoga...

  • @RakeshKumar-sx4dp
    @RakeshKumar-sx4dp 4 роки тому

    Make service video of Santro Xing

  • @AJ-lv
    @AJ-lv 5 років тому

    hw much engine oil is recommended by company.. 3 litres or 3.5 litres

    • @diyguy7378
      @diyguy7378  5 років тому

      Please refer your owners manual...

    • @m.f.k515
      @m.f.k515 5 років тому

      Mere channel ko subscribe kro me aisa videos banunga

  • @ankitgoel6sep
    @ankitgoel6sep 4 роки тому

    what is the size of socket

    • @diyguy7378
      @diyguy7378  4 роки тому

      Sorry oil filter socket size is not written on it, go to any tools shop and ask for i10 or xcent oil filter socket...

  • @makwanasunil79
    @makwanasunil79 4 роки тому +1

    Bahut baar alignment karvaaya bhirbhi meri car left side khich jaati hai.

    • @ScanAlone
      @ScanAlone 4 роки тому +1

      Bhai company se karao bahar se mat krao bahar se steering calibration nhi ho pati vo company me hi krte hai tbhi thik hogi

  • @akshunyabajpai9286
    @akshunyabajpai9286 6 років тому +1

    Speak Louder. Are you on tbhp?

    • @diyguy7378
      @diyguy7378  6 років тому

      Akshunya Bajpai
      Hi,
      No I am not on TBHP.

  • @kalimyasin9016
    @kalimyasin9016 3 роки тому +1

    Vistar se

  • @PlayJewel
    @PlayJewel 5 років тому +1

    U should never go under the car without using iron stands. That jack alone is not reliable.

    • @diyguy7378
      @diyguy7378  5 років тому

      Dear John
      I had used jack stand as well, you can check in video.

  • @akshunyabajpai9286
    @akshunyabajpai9286 6 років тому +1

    You have overfilled the oil.

    • @diyguy7378
      @diyguy7378  6 років тому

      Akshunya Bajpai
      No we can't fill as we have tight it horizontally.

    • @akshunyabajpai9286
      @akshunyabajpai9286 6 років тому

      DIY Guy I am saying that you have filled the engine oil above the F mark on dipstick. It is going to damage the oil seals in the long run.

    • @diyguy7378
      @diyguy7378  6 років тому

      Hi Akshunya Bajpai
      I follow owners manual to check all those specifications...