@@garymartin9728the brand is liquid molly and I believe that's engine flush, but liquid molly does make a hydraulic lifter additive that helps quiet lifter tick😊👍
Era só o nível do óleo que estava baixo? Tu me deu um ânimo. O meu tá batendo assim fiquei com receio de ter que abrir o motor e ter algum b.o. vou trocar o óleo pra ver se resolve.
O mwu carro ficou com muito barulho e fumaça branca o mecânico disse que era a injeção tava cobrando 800,00 troquei de posto por que ondw abasteco estava desconfiado parou o barulho e a fumaça branca @@sskhan8999
Старое масло- гудрон из-за вязкости не попадало в компенсаторы, налил бензина, масло стало жидким, компенсаторы стали работать. Люди, меняйте масло вовремя!!!!
А ещё в целях профилактики мягкими промывками нужно пользоваться,чтобы нагар и шлак всякий смывать ,но не тогда когда начался бешенный масложор и различные вибрации в работе двс. Bg 109 классная вещь ,на ютуб полно видео с инструкцией применения ,проверил на себе ,краску не поднимает ,а вот говницо всякое отмыло отлично
А что можно сделать, если у меня такой же звук на дизельной Hyundai i30 FD но только при нагрузке. Т.е. на холостых работает идеально, мотор работает тише чем бензиновый, а под нагрузкой, типо в горку едешь или просто стартуешь со светофора, то звук как на видео
@@cccp8772чаще менять масло и не вестись на маркетинг, баночку залил и спишь спокойно. Чем больше пробег, тем больше картерных газов, соответстенно уменьшается интервал. К сожалению только лаб анализ на щелочное, разные моторы по разному убивают масло. Лайтовые присадки для промывки плацебо, если начался лак лайтовыми не отмоешь, а те которые работают подрывают краску поддона и т.д. т.е. надо знать можно ли в свой мотор
I knew a guy that owned an old service/Fuel Station back in the 1960’s-1970’s, they would use a small amount of paint thinner to stop valve clatter in customer’s cars. Worked great.
Paint thinner caused my valve clatter, its like a more extreme version of fuel enhancer/gas stabilizer etc i think But to be fair i dumped a gallon in 😔🤡🌎
In all honesty, liqui moly does make some great products. Ive used the ceramic oil treatment for years and I love it. Runs smooth and quiet. No idea if its going to prolong the life of the engine but it sure does run and sound great.
My neighbor uses the ceritech. He uses his cars for delivery and beats the crap out of them. Its all stop and go for 14 to 16hrs 5 days a week. He just turned 300k on his scion and it runs great. Hes been trying to get me to use it in my vehicals for a while now. I hadnt until this point because of cost but at this point, looks like its well worth it.
@@brandonsmith3782but isn’t it the same as something like Lucas oil additive? Just thickening the oil weight? Just masks the problem, doesn’t resolve it?
@@VladmirVorkeshky no, its a ceramic treatment. Supposedly it coats the moving parts with ceramic. You use it before a problem. Im a huge believer at this point. Ive watched him absolutely beat on his cars for the last 8 years. He has other issues with cars but all the engines are still in great shape.
I swear to you I have tried it on solid lifters and it really works that easy. Might have taken twice the time but it did come out with the same sound, no knock, no BS.
@@bpet6990i dont know also. And i want to find out. Yesterday my car start making same noises and somebody told me google it to see what. And now im on this video somehow
В масло 5в 40 залил присадку кондиционер металла / ЕР / Шум двигателя перестал через сутки работы двигателя , Двигатель Ниссан 2/4 . После трёх недель работы проверил компрессию , увеличилась на 1 , 5 с 9,5 Стала 11 во всех цилиндрах . Как понял произошел процесс напыления металла частиц на кольца и гильцы вобщем на весь двигатель . Проработал двигатель уже 680 000 тыс , после залива проработал 187 тыс км . Неплохая разработка !
Присадка ЕР не производит напыление, это преобразователь трения и если перестать лить при последующих заменах он вымывается. Вот так. Я её тоже использую , вещь хорошая. А что здесь заливают непонятно.
Напыление металла?) Чел ты че серьёзно?) Ты вообще понимаешь в какую сказку ты веришь?) Это вообще не логично чтоб какая то присадка какое то напыление металла сделала это просто противоречит физическим законам) Ты вообще что-ли глупый как пенёк?) Едь на ремонт своего старого как мамонт двигателя больше тебе ничего не поможет потому что там пробег как у моей бывшей бабы далеко за 500 тысяч) ни какая нафиг присадка тебе не поможет) можешь даже вместо масла присадки заливать все равно не поможет) голову не делай себе в чудеса перестань верить проснись)
Mercedes M103, it has the hydraulic compensators in the rocker arms. They can get stuck and fail to adjust properly with oil pressure. They really aren't bad to replace, and aren't prohibitively expensive. If that's an early M103 that doesn't have the updated cam and rockers there can be cam lobe wear from the engine being run with bad compensators. That engine likes 15w40 or even 15w50 with a good zinc content as well.
@@inverted311 Because it's an additive. After you run the engine for 15 minutes or so, you drain the oil completely and put fresh clean oil in. I used Liqui Moly cleaner in my 1.8tfsi once when I bought the car. After that every 15.000km new fresh oil instead of the 30.000km that's the official interval. Never had any issue oil related with the car. Bought it with 40.000km and is now on 192.000km.
Soy mecánico, y he usado el producto y le digo que por increíble que parezca, es verdad, eso funciona y así de rápido se elimina ese molesto ruido... Hasta que lo probé pude creer, ..
Там на банке по-немецки написано, что это просто "промывка мотора". Чипа очиститель от нагара. Он типа жидкий и просто папа в компенсаторы. Нормальное масло нужно лить изначально, а не любой дешак
@@tomwoods8678 XcelPlus Engine Treatment. Still expensive. But i trust it. My dad used it in the 80s already - all his cars got more than 300.000km on it as he sold them (still running fine). Im using it since 2009 and my Peugeot 307 got 411.000km now. I know, its no wonderstuff... yearly oilchange with a decent oil helps aswell as driving the car as it needs and maintain it well.
@@tomwoods8678 I also heard good stuff about Liquimoly Ceratec and some of my friends use it - but i wont change the "never change a running system" system :D
Great stuff. I used the oil treatment on an old M. Benz E320 my father left me when he passed. The engine came alive. No knocks, quieter idle, and overall better performance. Noticeably better.
@@Ruben_54 I added just under 2 bottles of the Liqui Moly - Cera Tec engine oil additive product right after an oil change. Highly recommend. After about 2 months of light driving, I added the Liqui Moly MOS2 Anti-Friction Engine Treatment product. Best treatments I've used. The engine purrs.
Suenan los taques al ir bajo de nivel de aceite , al rellenar el aceite sube de nivel y lubrica los taques que estan en la parte mas alta del motor y al llegarle bien el aceite dejan de sonar😅
@@ebbeweber1310 there are several uploaded videos about flushing with diesel. 1 miniute of idle doesn't harm anything as the diesel fuel can lubricate.
Ini hanya untuk kasus temporary tidak bisa digunakan dalam jangka panjang, harus kuras oli dan setel klep standarnya, dan cek apakah knalpot berasap dan bau oli, kalau bau oli klep hrs dicek total
EL LIQUIDO TRAE METALES PARA SELLAR LOS ESPACIOS ENTRE LOS METALES Y ASI SELLA LOS ESPACIOS Y EVITA EL GOLPETEO. 👌 AL CAMBIAR EL ACEITE SE TENDRA QUE PONER DE NUEVO EL RESTORE (RESTAURADOR) DE RUIDOS POR GOLPETEOS.
У меня на старом Фольксвагене гидрокомпенсатор застучал. Промывочным маслом вылечил тот самый дядя Вася из гаражей. Сказал что начнём с меньшего. Гидрик заткнулся , отъездил три года и продал.
Я проехал на рено f4r 800.000 км. Уже в 350.000 стал ехать лениво. Что я сделал: - раскоксрвка митсу шума - перед заменой масла - замена масла каждые 10.000 После 3-4 раза стал понимать, что те горки уже не сажают машину как прежде... Делал раскоксрвка каждую замену масла... И проехал ещё 450.000+ км.
@@user-dx9ti8xz3p как делал я: перед заменой масла: - прогреть двигатель до 60-70° - выкрутить свечи - поставить поршни в среднее положение (прокрутив шкив коленвала, либо стартером чуть по чуть и измерять проволочкой) - залить ШУМУ и сразу закрутить свечу на этом цилиндре. ПОВТОРИТЬ с остальными цилиндрами. ОСТАВИТЬ на 30-40 минут. ***я прогревал ещё раз до 60-70°, и повторял заливку второй раз так же на 40 минут. -завести прогреть двигатель. - слить масло. - заменить фильтры. - залить масло. И прокатиться минут 20-30 БЕЗ НАГРУЗКИ (на 2500 - 3000 оборотах). Используемая химия: Mitsubishi Shumma, MZ 100139 EX, 250 мл
Я в своей Сиерре,использовал присадку Хадо,до замены и после,два раза. Машина ,делали капремонт мне,Броварские шикарные,возле вокзала. 259 наездил,и после меня 250 три хозяина каталось,без капиталки.
У меня на старенькой тайоте, когда щуп уже до масла не доставал, так же цокать мотор начинал (предполагаю компенсаторы). И если долить туда, да хоть камазовского масла, получался тот же эффект...
Это когда масла так мало в поддоне, что маслонасос черпает смесь воздух- масло и тут залили ещё порцию масла. Хоть воду залейте, по первости будет тот же эффект, прекратят стучать компенсаторы (не знаю есть ли они в этом движке, по виду должы быть, тогда ещё думали о удобстве использования техники) и в зазоры подастся порция масла, а потом как повезëт (час работы или неделя..).
@@user-hh4kc1ti4z когда меняете масло в двигателе, обратите внимание на звуки, примерно секунду слышен подобный звук как на видео (в следствии масляного голодания), затем масляной насос успевает нагнать в систему маслоканалов порцию смазки и звуки исчезают. Чудо жидкости дающие реальный результат в двигателе это масло и бензин, ну и ацетон для промывки форсунок (бензинка).
Любой здравый моторист вам скажет: промывки всё без исключения это зло для ДВС, если уж и хочется промыть возми самое дешёвое масло с похожими допусками и промой им, больше шансов оставить ДВС живым
Płukanie silnika w niczym nie szkodzi czyści nagar w pierścieniu i nawet przestaje auto kopcić i brać olej nie wiem ty do szamana jeździsz nie mechanika
Субару Легаси в4 твин турбо у нас масло митшубишн налили обычно утром чуть чуть силиндр стучает а так масло до замена не жрёт не грамм меняем каждый 3. 4. Тысячи км потом налили другое чуть по дороже нет стука радуемся не жрет масло ездим много и часто быстрее год как у нас спидометр 180 а до нуля дальше несколько сек турб яма и опят второй т и до нуля до 260 км час раньше после 180не надали дальше сказывается 2000 год выпуска в4. 420шт пвто компания . Порш чтота делается не пришивка коробок не чего Завадского состояние спасибо большое вам
Actually liquid Moly motor flush frees stuck rings and stuck lifters. I used it in my Honda as it was Bruning oil because the oil ring gets gunked up. Instantly fixed my oil consumption issue and made the top end much quieter. Not a snake oil cover up.
@bryceocain5234 but you obviously know it's a bandage at best and if rings are getting dunked up then values are sticking open and the motor needs to be fixed via rebuild right.
@derin111 if there's enough build up to gunk up piston rings stick valves or stick lifters it's time for a rebuild and any good mechanic will agree it's the best thing to do at that point before it does break. See right now it's cleaning the parts replace gaskets and bering and rings and use all the parts you already have, it's cheap.
У жены форд фиеста на нем сильно гремит диск сцепления, при нажатии на педаль мотор работает тихо, при отпускании гремит. Лучший образец для рекламы подобного рода присадок.
It’s a Mercedes I work in automotive the proper way to do that is to drain the oil after you remove the oil filter do not use any oil flush it going to have hi mileage it’s a Mercedes add a small bottle of oil treatment not that big bottle if you need that change the motor add treatment then oil the right type and grade and that should work fine do it right 😊😊😊😊😊
I had one do that to me on a f150. I changed the vvt solenoid after it started making noise again. Now it's smoot like butter. Next I will change the injectors when they come in the mail. Then I'll be getting better fuel mileage. That's the beauty of being able to work on vehicles.
@@Sheburek_iz_90x если честно хватит на долго это точно, проблема в самих гидриках была их просто под замену, а так продавалась она крайний раз весной 22-го
Кто то рядом перестал стучать по кастрюле,?
Najlepszy komentarz.Leże ze śmiechu 😂😂😂.
😅😅
😂😂😂😂😂😂😂😂
🤣🤣🤣🤣🤣🤣🤣🤣
Muy bueno!😂
Si saben leer ingles el bote dice que es un Flush o lavado de motor, se pone antes de el cambio de aceite😊
y si lo esta haciendo bien o no user- re5
?
Adding any oil when the level is low will quiet the lifters.
NO WAY THATS CRAZY🤯🤯🤯🤯
CORRECTO!!! 👍
Así de simple bro.....👍👍👍👍👍👌
น้ำมันฟลัชล้างคราบเขม่าตะก อนในน้ำมันเครื่อง
Вентилятор сразу перестал задевать за плистиковый телевизор😂😂
What is he putting in the engine?
@@garymartin9728the brand is liquid molly and I believe that's engine flush, but liquid molly does make a hydraulic lifter additive that helps quiet lifter tick😊👍
Дуфузор называеться
@@garymartin9728ослинную мочу ! Попробуй
Дифузор😅
И чувак перестал стучать ключами за своей спиной😂
Bro, that sound is coming from the car. ☠️🗿
Wrench LMAO
Скорее всего просто мотор сам перестаёт стучать через некоторое время, звук относительно видео сдвинули и всё
These ppl clearly have never heard an engine run. That is 100% valve train noise
100%
Автор всех за лохов считает
Долил оказывается нужный уровень масла😂
Era só o nível do óleo que estava baixo? Tu me deu um ânimo. O meu tá batendo assim fiquei com receio de ter que abrir o motor e ter algum b.o. vou trocar o óleo pra ver se resolve.
Этот бутылек 0,5 промывка масляной системы.
O mwu carro ficou com muito barulho e fumaça branca o mecânico disse que era a injeção tava cobrando 800,00 troquei de posto por que ondw abasteco estava desconfiado parou o barulho e a fumaça branca @@sskhan8999
Просто звук убрал в видео.
@@sskhan8999 присадка для старых двигателей она существует
Sounds like they got to tap it music man in there.
For Sale
Runs great
Mechanically Sound, would drive anywhere.
Yeah, within sight of my house
Старое масло- гудрон из-за вязкости не попадало в компенсаторы, налил бензина, масло стало жидким, компенсаторы стали работать. Люди, меняйте масло вовремя!!!!
А ещё в целях профилактики мягкими промывками нужно пользоваться,чтобы нагар и шлак всякий смывать ,но не тогда когда начался бешенный масложор и различные вибрации в работе двс. Bg 109 классная вещь ,на ютуб полно видео с инструкцией применения ,проверил на себе ,краску не поднимает ,а вот говницо всякое отмыло отлично
Ну не включай мастера!!!! Гудрон не твоё в интернете!!! Тут приколы....
А что можно сделать, если у меня такой же звук на дизельной Hyundai i30 FD но только при нагрузке. Т.е. на холостых работает идеально, мотор работает тише чем бензиновый, а под нагрузкой, типо в горку едешь или просто стартуешь со светофора, то звук как на видео
@@cccp8772чаще менять масло и не вестись на маркетинг, баночку залил и спишь спокойно. Чем больше пробег, тем больше картерных газов, соответстенно уменьшается интервал. К сожалению только лаб анализ на щелочное, разные моторы по разному убивают масло. Лайтовые присадки для промывки плацебо, если начался лак лайтовыми не отмоешь, а те которые работают подрывают краску поддона и т.д. т.е. надо знать можно ли в свой мотор
Уровень стал, гидрики закачали
😂 Probably just running low on oil and hearing the hydros ticking... Half a liter of oil would have done the same 😁
Exactly 💯....we. ant add some water flud to the oil.pressure oil will reduce
@@sdkreviewdz what you trying to say?
Exactly what I was thinking! 😂
Exactly!
Exactly
And the guy behind stops kicking the key On a metal Part 🤣🤣🤣
Card on the bicycle wheel
😂😂😂😂😂😂😂😂😂😂😂😂
U r so funnyyyyyyy foooo😅😅😅
Is a common rumor by mercedes
I knew a guy that owned an old service/Fuel Station back in the 1960’s-1970’s, they would use a small amount of paint thinner to stop valve clatter in customer’s cars. Worked great.
I remember that. It was spirits. Like denatured alcohol. Not too much.
Paint thinner caused my valve clatter, its like a more extreme version of fuel enhancer/gas stabilizer etc i think
But to be fair i dumped a gallon in 😔🤡🌎
😱
We use to use kerosene
I have even seen a leather belt cut down and used for a rod bearing! And yes it worked!
Лучший сон перекупа😂
😂😂😂
Still ticking
😂😂😂😂😂😂😂😂
Stop blocking the mic
Да это компенсаторы стучали, долил уровень и все
In all honesty, liqui moly does make some great products. Ive used the ceramic oil treatment for years and I love it. Runs smooth and quiet. No idea if its going to prolong the life of the engine but it sure does run and sound great.
My neighbor uses the ceritech. He uses his cars for delivery and beats the crap out of them. Its all stop and go for 14 to 16hrs 5 days a week. He just turned 300k on his scion and it runs great. Hes been trying to get me to use it in my vehicals for a while now. I hadnt until this point because of cost but at this point, looks like its well worth it.
@@brandonsmith3782but isn’t it the same as something like Lucas oil additive? Just thickening the oil weight? Just masks the problem, doesn’t resolve it?
@@VladmirVorkeshky no, its a ceramic treatment. Supposedly it coats the moving parts with ceramic. You use it before a problem. Im a huge believer at this point. Ive watched him absolutely beat on his cars for the last 8 years. He has other issues with cars but all the engines are still in great shape.
@@brandonsmith3782what’s the specific product called? I got pretty bad lifter tick
Какой пробег у вашего автомобиля?
I swear to you I have tried it on solid lifters and it really works that easy. Might have taken twice the time but it did come out with the same sound, no knock, no BS.
It says on that can : Engine flush. How does that work actualy?? What happened did it thined the oil or how that knock dissapered???
What is this
Which exact liquimoly product is used in this video? Thanks up front
@@bpet6990i dont know also. And i want to find out. Yesterday my car start making same noises and somebody told me google it to see what. And now im on this video somehow
Same as using Engine honey it gets thicker and stops the lifters tapping for a little while
В масло 5в 40 залил присадку кондиционер металла / ЕР /
Шум двигателя перестал через сутки работы двигателя ,
Двигатель Ниссан 2/4 .
После трёх недель работы проверил компрессию , увеличилась на 1 , 5 с 9,5
Стала 11 во всех цилиндрах .
Как понял произошел процесс напыления металла частиц на кольца и гильцы вобщем на весь двигатель .
Проработал двигатель уже 680 000 тыс , после залива проработал 187 тыс км .
Неплохая разработка !
Присадка ЕР не производит напыление, это преобразователь трения и если перестать лить при последующих заменах он вымывается. Вот так. Я её тоже использую , вещь хорошая. А что здесь заливают непонятно.
Напыление металла?) Чел ты че серьёзно?) Ты вообще понимаешь в какую сказку ты веришь?) Это вообще не логично чтоб какая то присадка какое то напыление металла сделала это просто противоречит физическим законам) Ты вообще что-ли глупый как пенёк?) Едь на ремонт своего старого как мамонт двигателя больше тебе ничего не поможет потому что там пробег как у моей бывшей бабы далеко за 500 тысяч) ни какая нафиг присадка тебе не поможет) можешь даже вместо масла присадки заливать все равно не поможет) голову не делай себе в чудеса перестань верить проснись)
Металлоплакирующих присадок множество. Наилучшие - 🧩 молибденовые, добавляются при каждой замене ⚠️ масла✌️👍💪
Да ER нормальная тема
Как полностью название ЕР?
Mercedes M103, it has the hydraulic compensators in the rocker arms. They can get stuck and fail to adjust properly with oil pressure. They really aren't bad to replace, and aren't prohibitively expensive. If that's an early M103 that doesn't have the updated cam and rockers there can be cam lobe wear from the engine being run with bad compensators. That engine likes 15w40 or even 15w50 with a good zinc content as well.
Спасибо сэр 👍
Whatever he added looked super thin...lol
@@inverted311 Because it's an additive. After you run the engine for 15 minutes or so, you drain the oil completely and put fresh clean oil in.
I used Liqui Moly cleaner in my 1.8tfsi once when I bought the car. After that every 15.000km new fresh oil instead of the 30.000km that's the official interval. Never had any issue oil related with the car. Bought it with 40.000km and is now on 192.000km.
Good information thanks
No cats? My understanding is zinc destroys cats.
😂Del otro lado del carro o detrás de cámara esta el que le pega al metal jajajaja
Todo puede ser 😂
@@miguelgonzalezpolo9703
Не может такого быть!
Вспомните, когда и правда застучит...
Mit Öl funktioniert das gleich viel besser....
isi 😂😂😂😂
Soy mecánico, y he usado el producto y le digo que por increíble que parezca, es verdad, eso funciona y así de rápido se elimina ese molesto ruido... Hasta que lo probé pude creer, ..
Там на банке по-немецки написано, что это просто "промывка мотора". Чипа очиститель от нагара. Он типа жидкий и просто папа в компенсаторы. Нормальное масло нужно лить изначально, а не любой дешак
Какое масло нужно лить, умник
Это правда масло нужно лить хорошее тока где его взят???
Подсолнечное
Use cheap oil for engine flush and good oil vor running time
En Monterrey México no he podido encontrar quien venda este excelente aditivo. Alguien sabe dónde lo venden ?
Me pareció verlo en autozone soy de mty bro
Si lo encuentras o lo. Encuentro te comento
No le des tanta fsma al producto ese, cuando El motor esta sonando asi es por falta de aceite hechale cualquier aceite y va a dejar de sonar
روغن لیکو مولی هست مکمل روغن ما تو ایران اصل این روغن رو داریم❤
Back in the late 80's they had Motor Up, good stuff
Still using Motorup extreme and the "real" Slick50 thats sold under another name :p
@@ehkuh
Whats the real slick50 called now?
I've heard about it but never the name.
Z max🤘
@@tomwoods8678 XcelPlus Engine Treatment.
Still expensive. But i trust it.
My dad used it in the 80s already - all his cars got more than 300.000km on it as he sold them (still running fine). Im using it since 2009 and my Peugeot 307 got 411.000km now. I know, its no wonderstuff... yearly oilchange with a decent oil helps aswell as driving the car as it needs and maintain it well.
@@tomwoods8678 I also heard good stuff about Liquimoly Ceratec and some of my friends use it - but i wont change the "never change a running system" system :D
NESECITO ESE LIQUIDO PARA MI EXPOSA
Yo. La lubrico hermano usted no se preocupe
Se lo echas cuando duerme y deja de roncar 😁
Jajajaja 😂😂😂
El mejor comentario del mundo 😂😂😂😂
😂😂😂😂 ela está te batendo 😢😢😢
Great stuff. I used the oil treatment on an old M. Benz E320 my father left me when he passed. The engine came alive. No knocks, quieter idle, and overall better performance. Noticeably better.
What treatment do you use I have a 2004 e320 would like to ad one thank you
What is the name of this product please
@@Ruben_54 I added just under 2 bottles of the Liqui Moly - Cera Tec engine oil additive product right after an oil change. Highly recommend. After about 2 months of light driving, I added the Liqui Moly MOS2 Anti-Friction Engine Treatment product. Best treatments I've used. The engine purrs.
Como se llama el producto y sirve para la caja de canvio para camion
Офигеть! Бегу в магазин, волосы назад😂
:)
😂😂😂😂😂😂😂😂
Волосы назад и резко в бок
@@user-ml2yf8jf1lНа повороте 😂
Ннеет стой не надо! Нет ! Не надо. Сначала посмотри другой комментарий где 1.5 тыс лайков прочти их а потом беги
There's a guy in the background tapping a wrench on the fender.
No as someone with valve lash, this is definitely it.
😅
@@crimson57rosethis works?
@@sbeoverkill so you can sell it sure, but I think it's just creating foam where the two different oils mix which deadens the sound for a while.
😂
Those Great German products work well.
Definitely seen some amazing success using the same brand.
Fala para nós qual é o nome desse produto que você está usando no carro
Suenan los taques al ir bajo de nivel de aceite , al rellenar el aceite sube de nivel y lubrica los taques que estan en la parte mas alta del motor y al llegarle bien el aceite dejan de sonar😅
Ist aber kein Öl was rein gefüllt wird.
Le boi,a la Idea de que alguien está golpeando algo!!!@@Der-mit-dem-Lack-Tanzt
@@Der-mit-dem-Lack-Tanzt ale ten płyn jest wlewany do oleju, spływa do miski olejowej i miesza się z pozostałym olejem podnosząc jego poziom.
Then the oil level would have to be so low the oil pump isn't getting any oil, otherwise the oil will reach also the tumblers ,low level or not.
No es peligroso para el motor?? No le puede tirar la compresión hacia adentro y dejarlo sin aros?
La última vez que lo usé se me descabezó una válvula y me marcó el pistón.
¿Que producto es?
A hydrolic pusher had sludged oil blocking it. Flushing the engine time to time with diesel and running about a minute, cleans the sludges off.
What is this stuff
Better still, run diesel oil every now and then. Run it nice and hot and it will clean the inside of your block. You`re welcome
A good way to ruin your bearings...
@@ebbeweber1310 there are several uploaded videos about flushing with diesel. 1 miniute of idle doesn't harm anything as the diesel fuel can lubricate.
@@hugueslecorre4893 Don't belive everything you see on YT....
Liqui Moly has nanobots that adjust your valves in real time.
With billions of nano wrenches
The $hit you see on youtube is unreal
For real
Adjust valves?! Oil?!
Состав из Фиксиков😂
Ini hanya untuk kasus temporary tidak bisa digunakan dalam jangka panjang, harus kuras oli dan setel klep standarnya, dan cek apakah knalpot berasap dan bau oli, kalau bau oli klep hrs dicek total
What is the exact name of the product? Can it be added to engine oil? Can you give me information?
Ok when I pour it in stop tapping that screw driver will make millions 😂😂
Muy buen producto cual me recomiendas para el consumo de aceite bro
Lily Moly es lo más,muy recomendable,todos los productos 👌🤓
Πολύ σωστα
@@user-jh5hg5sx8b el limpia inyectores es increíble 👌
I've used this stuff before and it worked for ticking lifter. Car had been sitting for a while
Кто-то так-же с бодуна🤣🤣🤣🤣🤣🤣
😅😅
Петросян прям
Я .... такая же хуйня...
У меня стучат гидрики уже три года, пока не нагреется, хотя масло всегда в норме и не доливаю от замены до замены.
Хундай? У меня тоже самое
@@Jury_777 нет, приора.
mejor demostración, imposible!!!
EL LIQUIDO TRAE METALES PARA SELLAR LOS ESPACIOS ENTRE LOS METALES Y ASI SELLA LOS ESPACIOS Y EVITA EL GOLPETEO. 👌
AL CAMBIAR EL ACEITE SE TENDRA QUE PONER DE NUEVO EL RESTORE (RESTAURADOR) DE RUIDOS POR GOLPETEOS.
😂😂😂
У меня на старом Фольксвагене гидрокомпенсатор застучал. Промывочным маслом вылечил тот самый дядя Вася из гаражей. Сказал что начнём с меньшего. Гидрик заткнулся , отъездил три года и продал.
Я проехал на рено f4r 800.000 км.
Уже в 350.000 стал ехать лениво.
Что я сделал:
- раскоксрвка митсу шума - перед заменой масла
- замена масла каждые 10.000
После 3-4 раза стал понимать, что те горки уже не сажают машину как прежде...
Делал раскоксрвка каждую замену масла... И проехал ещё 450.000+ км.
Из-за гидрика продал? 😅 С женой развелся на второ день после свадьбы, так как уже не целка?
@@user-fu2nd2hd1g Продал не из-за гидрика. Продал старый автомобиль чтобы купить новый. А с женой своей ты конечно шутканул..
@@smsgoshaраскоксрвка что это?
@@user-dx9ti8xz3p как делал я: перед заменой масла:
- прогреть двигатель до 60-70°
- выкрутить свечи
- поставить поршни в среднее положение (прокрутив шкив коленвала, либо стартером чуть по чуть и измерять проволочкой)
- залить ШУМУ и сразу закрутить свечу на этом цилиндре.
ПОВТОРИТЬ с остальными цилиндрами.
ОСТАВИТЬ на 30-40 минут.
***я прогревал ещё раз до 60-70°, и повторял заливку второй раз так же на 40 минут.
-завести прогреть двигатель.
- слить масло.
- заменить фильтры.
- залить масло.
И прокатиться минут 20-30 БЕЗ НАГРУЗКИ (на 2500 - 3000 оборотах).
Используемая химия: Mitsubishi Shumma, MZ 100139 EX, 250 мл
Que producto es ??
como se llama el producto?
Я в своей Сиерре,использовал присадку Хадо,до замены и после,два раза. Машина ,делали капремонт мне,Броварские шикарные,возле вокзала. 259 наездил,и после меня 250 три хозяина каталось,без капиталки.
Бро у меня опел астр j пробег. 450000 масло жрет как думаеш поиожет?
@@user-km2uf4ze5rМегафорс
О чём ты написал?,объясни)
Это все правда , сам пробовал. Залил и мотор перестал издавать не только стук , но другие звуки.
Заклинил что ли? 😎
@@ganibalkarfagen3850 у знакомого на ф 10,реально клину дал и километра не проехал.
Что залил????
@@sergsokolov4253 название и фирму не помню уже, присадка фирмовая какая-то. Если нужно название, могу уточнить))
@@ganibalkarfagen3850Ага😂😂
У меня на старенькой тайоте, когда щуп уже до масла не доставал, так же цокать мотор начинал (предполагаю компенсаторы). И если долить туда, да хоть камазовского масла, получался тот же эффект...
A dealership trick is adding Heavy oil to a car that's ticking!
😊😊 acho que ele baixou o volume do celular e deu esse efeito fantástico no motor....motor mudo...kkkk😅😅😅
Эта присадка супер. И клапана равняется, и сцепу восстанавливает, если не подделка то даже развал сделает и шины наварит
А как с бензином? Бензин назад в бак восстанавливается? Очень нужно
У меня давление в шинах выравнелос 😂
Como se llama el producto por favor
Al vídeo le tapan el micrófono pero sigue oyendo el sonido de lifther.😂
Это когда масла так мало в поддоне, что маслонасос черпает смесь воздух- масло и тут залили ещё порцию масла.
Хоть воду залейте, по первости будет тот же эффект, прекратят стучать компенсаторы (не знаю есть ли они в этом движке, по виду должы быть, тогда ещё думали о удобстве использования техники) и в зазоры подастся порция масла, а потом как повезëт (час работы или неделя..).
Это не масло это штука поднимает вязкость масла
@@user-hh4kc1ti4z когда меняете масло в двигателе, обратите внимание на звуки, примерно секунду слышен подобный звук как на видео (в следствии масляного голодания), затем масляной насос успевает нагнать в систему маслоканалов порцию смазки и звуки исчезают.
Чудо жидкости дающие реальный результат в двигателе это масло и бензин, ну и ацетон для промывки форсунок (бензинка).
One of the most important: the oil (quantity, quality, change frequency) and in turbo engines: temperature.
Масло в гидрики попало. Чудо! Мотор греметь перестал!
Alguien me puede decir q producto uso
Любой здравый моторист вам скажет: промывки всё без исключения это зло для ДВС, если уж и хочется промыть возми самое дешёвое масло с похожими допусками и промой им, больше шансов оставить ДВС живым
Płukanie silnika w niczym nie szkodzi czyści nagar w pierścieniu i nawet przestaje auto kopcić i brać olej nie wiem ty do szamana jeździsz nie mechanika
@@sidsid4862шаман😂
@@filipq4 I jak ktoś jeździ trupami nie robi nic koło silnika od początku nie dba to tylko płakać się chce jak czytam takie wypociny
Każdy rozsądny mechanik wie że płukanki działają ale tylko dobrej marki na przykład z liqui moly
@@adamknight7634 Ropa zwykła ropa też zadziała jako płukanka
Уровень масла проверять периодически надо, а приставкой ты его просто повысил до рабочего уровня!
Когда проморгал уровень,уже ничего не поможет,будут стучать гидрики.
Кстати эту присадку тоже пробовал,не помогает.
Ларгус 16клап.
Присадкой наверное😊
Sizden sonra ne olursa olsun, öylemi ?
Aynen, herhalde 1 sene turkiyede yaşamış.
Desde el 2007 lo empezaron a introducir en agencias en toluca
Это промывка двигателя перед заменой масла.
Я всегда так делаю на своих машинах.
Pos le faltaba aceite
La neta si 😂😂😂
При работающем двигателе не возможно что либо залить туда, если ни верите попробуйте, будете полностью в масле если попробуете
Audi A4 b5 доливал неоднократно без проблем...
Если движгу пиздец . То конечно будет с года воздух гнать ..
Hermano tu motor esta x tronar
Не говори херни , тыщу раз так делал
Не все моторы как ты думаешь
Puedo ponerlo en un viejo 6 cilindros?
Мечта каждого перекупа!
Лучшая реклама! Главное все честно!😹😹😹
😂😂😂😂 тот кто подстукивал чуть всю картину не испортил среагировал на поздно 😅😅😅
Does it work oñ people ? I just fixed my oil leak. 20 w 50w and made sure the oil filter was tightened good this time.
Субару Легаси в4 твин турбо у нас масло митшубишн налили обычно утром чуть чуть силиндр стучает а так масло до замена не жрёт не грамм меняем каждый 3. 4. Тысячи км потом налили другое чуть по дороже нет стука радуемся не жрет масло ездим много и часто быстрее год как у нас спидометр 180 а до нуля дальше несколько сек турб яма и опят второй т и до нуля до 260 км час раньше после 180не надали дальше сказывается 2000 год выпуска в4. 420шт пвто компания . Порш чтота делается не пришивка коробок не чего Завадского состояние спасибо большое вам
Ready for sale! 😊
😂😂😂 Масло слейте, а потом долейте тот же эффект будет.
Не будет
🙃 do you have any blinker fluid you sell? I think I’m out of that as well.
Para bajar el volumen del carro?
При температуре 70 практически любой гидрик перестаёт стучать
Реально работает , проверено личным опытом !👍👍👍
Здравствуйте что налил Какое масло?
What is the name of this substance that was added to engine oil until the sound disappeared?
Minyak tu ejas screw tepek sendiri ke? Tak nampak minyak tu bawak masuk spanar pun.. 😅😂
Don't fix it cover up the problem and sell it, great idea George 😂😂😂
Actually liquid Moly motor flush frees stuck rings and stuck lifters. I used it in my Honda as it was Bruning oil because the oil ring gets gunked up. Instantly fixed my oil consumption issue and made the top end much quieter. Not a snake oil cover up.
@bryceocain5234 but you obviously know it's a bandage at best and if rings are getting dunked up then values are sticking open and the motor needs to be fixed via rebuild right.
@@JohnManus-ow6fdStuck hydraulic lifters isn't 'broken'. They just need freeing.
@derin111 if there's enough build up to gunk up piston rings stick valves or stick lifters it's time for a rebuild and any good mechanic will agree it's the best thing to do at that point before it does break. See right now it's cleaning the parts replace gaskets and bering and rings and use all the parts you already have, it's cheap.
Didn't stop it. Wouldn't it be easier to just adjust them??
In this Mercedes M103 engine Valves are automatically adjusted. Sludge sometime blocks the oil paths not letting the oil
Circulate
У жены форд фиеста на нем сильно гремит диск сцепления, при нажатии на педаль мотор работает тихо, при отпускании гремит. Лучший образец для рекламы подобного рода присадок.
My dad's 5.4 triton made some noise. He put diesel oil in it to make it stop knocking.
Движок идеальный, новый, т к на работающем двигателе залить масло не получится, газами выдует его вверх.
У меня так было когда залил подсолнечное масло
В себя залил?
Вкладыши новые выросли😂 Фантазёр ты меня называла😅
Ese aditivo es muy bueno te ayuda a que el cambio de aceite sea cada 90 mil kilómetros
Que aditivo es y vale para diesel
В месте с двигателем?
тот самый чувак который перестал стучать ключ об ключ … 😅
Como se llama el producto
Le agregó el nivel correcto y a demás su compañero dejó de pegar con la cuchara 😂
Ликви моли конкретно помогает от стука гидрокомпенсаторов,было такое у меня
Es otro golpeando la carroceria
ja-ja
Lo mismo pensé. Demasiado obvio 😂
Da muss noch mehr rein . Bis oben voll 😂
Yes it's quit now because the ticking internal parts are now GLUED TOGETHER ‼️👍👍👏👏
It’s a Mercedes I work in automotive the proper way to do that is to drain the oil after you remove the oil filter do not use any oil flush it going to have hi mileage it’s a Mercedes add a small bottle of oil treatment not that big bottle if you need that change the motor add treatment then oil the right type and grade and that should work fine do it right 😊😊😊😊😊
Where Can I buy this oil?
I miss that single cam in-line 6 cyl Benz engine.
That's when they built a car
Dealerships be doing that with cars so when they sell them, they don’t make any noise. My engine blew up.
I had one do that to me on a f150. I changed the vvt solenoid after it started making noise again. Now it's smoot like butter. Next I will change the injectors when they come in the mail. Then I'll be getting better fuel mileage. That's the beauty of being able to work on vehicles.
Двигатель нагрелся и гидрокомпенсаторы перестали стучать, у меня на Хундае даже капот открывать для этого не нужно, просто постоять покурить 5 минут )
That's a liqui Molly aditive for cars, but we usually use it in the fuel 😂
Обычная присадка для гидриков, я так Приору продал 😅
Не хороший ты человек
😂😂
@@Phoenix-tc6lk согласен, было такое 😄, все равно её забрали перекупы 🤷🏻😄
@@archman94он так и продаётся друг? И на сколько км его хватит?
@@Sheburek_iz_90x если честно хватит на долго это точно, проблема в самих гидриках была их просто под замену, а так продавалась она крайний раз весной 22-го