UNI-T UTi260B affordable thermal camera for 3D printing enthusiasts (review, unboxing, samples)
Вставка
- Опубліковано 6 сер 2024
- UNI-T UTi260B thermal camera is one of the best in its price range with thermal resolution of 256x192. In this video I will talk about the specifications and reasons why I chose this infrared camera. After this I will do the unboxing and the review. In last part I will try to find some practical usage for this camera not only in 3D printing, but in everyday life.
Check the price on Banggood (affiliate link):
www.banggood.com/custlink/v3K...
Buy me a coffee:
www.buymeacoffee.com/mytechfun
Other support methods:
/ mytechfun
www.mytechfun.com/donation
Contents:
0:00 Introduction
1:12 Specifications
2:54 Unboxing
5:33 Review
12:33 Live Screen
13:23 Samples
21:09 Conclusions
#thermalcamera #3dprinting #ircamera - Наука та технологія
Helpful video, thank you!
Thanks for the video! I bought it for 218$ with discount.
Great Video, I installed that stick on insulation on the bed of my ender3 to try and get more even heating but have no way to tell if it works. This device would fit the bill
I got the same, and realy like it. I think the only thing I miss is to be able to use a fixed temperature range. The camera always auto adjust and you can miss details when one point is very hot or when you want to compare different locations.
You can use a polished metal surface as a "mirror". Instead of measuring the temperature of the metal, you measure the temperature of the reflection.
Excelente video
The emissivity describes how much thermal radiation the material emits in relation to its temperature. When set incorrectly for a material your reported temperatures will be incorrect. Also, shiny surfaces will most likely report the wrong temperature.
What's the highest temp you ever get with yours ? Mine doesn't go past 199.7 C .
theoretically you can disassemble camera connect a buzzer from the LED contacts .
Great thinking. Probably buzzer can not fit inside, but you gived me another idea: photoresistor + buzzer (outside on some 3D printed holder), so it detects the leds. Bulky, but in "monitoring" it would be on some tripod anyway.
i have same camera and it do hanging when i set low gain or high gain it become freeze so i have to turn it off then trund on to work again do you have this proplem?
Thanks for the review.
do you know it the quality is enough be to detect a wall moisture from rain or leaking pipe ?
Only if the moisture has different temperature. 1°C difference is enough to be noticed.
InfiRay C210 uses exact same bolometer and supports UVC. In fact, InfiRay is manufacturer of bolometers used in your camera.
UVC means you can connect it directly to your PC and record video
The C210 appears to cost twice as much.
i have c200 and it now supports UVC. but how to record video?
@@backgammonbacon C210 only $300 in China
@@VideoBite the video capability is for c200pro.
Where Is the software for record the video?
I see these on aliexpress
You could check how good printer enclosures are
Hello.Do you use the smartphone charger to charge the battery?
Yes
what does the 9fps framerate affect? some models have 25 some have just 9. But i don't know what benefit will 25fps have?
fps effects movement. how fast the thermal camera can react to changes. 25fps better for electronics.
Hello. Where do you buy this support?
What support? Camera holder? Search for "magic arm for camera"
@@MyTechFun thank you
Hi, are you still using this Thermal Imager? I've had bad thing happened to me, I just bought it and when I firstly charged it fully it started to make whistling sound and wouldn't turn on anymore. It died completely.
I have two questions. How do I disable it? I haven't found any information on the internet, it has some sort of secret I think. It's very tricky or they did it like this on purpose.
2. Important question to me, I measured resistance between 5 volts and gnd on the Type C connector. It shows 200 to 210 ohms. It's not full short circuit, but close. If you have such a chance, can you tell what's your resistance?
P.s still cannot understand how it could happen. It looks awesome. Amazing quality. Best brand. And it dies after first charge....
Sorry about your product, I am still using it without any problems so far. There is a button do disable it (try long press if it is freezed). Also it disable after 10 minutes. Try to contact the seller, send it back if necessary.
@@MyTechFun I already disassembled it and found out that one diod was soldered very poorly. I was unlucky receiving a defected one.
@@StoneTL So, you could fix it?
@@MyTechFun not yet. This diode is in sot-323. But I'm working on it. Hope I didn't fry the main IC and it will work again without replacing parts. :)
$250‽
Jj