FYI, you can wax all cotton and cotton-polyester-blend materials with that Fjällräven wax. The fancy-sounding "G1000" is just a regular 65%-35% polyester-cotton blend fabric. Many outdoors jackets and pants are made out of such fabric. It is the cotton that soaks up the wax. Oh yeah, and you shouldn't wax the elastane-polyester parts (the black, stretchy panels).
Hawk Tools sells Fabric Wax designed to last for years. We use a proprietary mixture of Beeswax, Natural Oils and Pine Tar that leave a durable and water proof layer on most any blended or canvas fabric.
if they don't soak the water after wax so, what happen when you go hike in 80-90 degree ? you're gonna melt inside or boil. Are they even breathable after wax?
I gotta be honest...I will probably never wax mine again. The wax didn't last long and really didn't add much water resistance. Fjallraven has a spray as well that I am very interested in trying. It's what they use on the KEB line.
Quick question, im a bike commuter and thinking about doing the process to a few of my garments for when the weather is bad, how does the garments feel after using these particular bar of wax?
The garments don't feel bad...they'll loosen up quickly, but I have to admit I wasn't very impressed at how the wax held up, or how it actually performed. People might get better results than me, but I still got absolutely soaked...I wore my trousers in the snow without snowpants and I got drenched...it was wet snow, but it didn't help all too much. Still worth trying it though...it aids in fabric toughness longterm.
@@outerlimitless I do not believe this pant is rated for winter/snow/wet snow. They are a Spring and Fall pant (according to the sales rep). I also wanted to say that the pant is not treated with any toxic chemical to make the pant waterproof.. thus the wax. This product does not harm the environment, a key plus about these pants.
Yeah, I was ok with the hair dryer, but I can see the iron working well. I just didn't want to hear my wife yell at me when she got wax on her clothes!! Haha, thanks for watching!
Lol, I jst tried waxing a Swiss M70 Alpenflauge field jacket. Forget it. I must have spent an hour just on the hood. I think the G1000 is doable but this coat's material is far too thick and not nearly as tightly woven which is a must. Oh well live and learn. By the way this surplus jacket is unbelievable for being less than $20 Canadian. Essentially a load bearing vest built into the coat...its just insane.
It takes a long time for sure! I'm tellin ya...to do a good job is quite a bit of work. I'm curious about the jacket...I'll definitely take a look. Thanks for watchin!!
I've only waxed them the one time...to be honest it was almost a waste of time. I guess if it toughens up the fibers then it's worth it, but don't expect these pants to be water resistant. They were during my video, but the first time I wore them after waxing them was in one of my videos...it was the March hike to Flat Mountain Pond...it was snowey and sleeting and I got completely soaked. It's still worth trying it though...I'd suggest giving it a shot to see if it works for your needs.
I am going to wax my Vidda Pro trousers just like you did. I have a silly question,do you iron them after you wax them and if you do what is the setting on the iron? I am a guy and new at this. thanks.
I'm not sure about the iron, but the hair dryer worked well. I'd say just experiment with the iron, but start low...if it melts the wax, you're good. I would not go too high at first. I can tell you that it's almost not worth waxing them unless you're into doing it for the project. Mine got immediately soaked and after a wash it's like the wax was never there...I don't think I will wax them again. But, honestly go for it anyway...it's not gonna hurt...actually strengthens the fabric, and it's one of those things...the more you do, the better you get at other projects anyway. So good luck!!
IRONS DO NOT RUIN POLYCOTTON. You're like the 4th person I've seen that said something to that effect. Just stick it on a low cotton setting, and you're FINE. Even Fjallraven says you can use an iron. I have no idea why people think an iron will damage polycotton material.
I did the same job as you. I tried to test the waterproof of the garment under the rain, not under a tornado and... Fuck it doesn't work.???i repeat three times and still not work. Wtf I'm going mad. I'm gonna take it no more. I've barents Pro pants and I used the g1000 greenland wax. I really cannot understand. The pants are now really stiff and heavy cause the wax, looking like Leder biker pants. Any tips guys??? What I did wrong?
YES, I agree with you completely. I got totally wet the first time I used them...was in a reasonable snow...not even rain. The good news is they dry out fast. They wax will break in eventually and the pants will soften again. Just keep wearing them. I will never wax my G1000 again. I think it's useless.
Why not forget the wax and just stick them in the washer.... wash with Nikwax Tech Wash first to get them clean, leave them in the washer then wash them in Nikwax Cotton Proof.... gotta be easier than messing about with wax?
The was is a pain in the ass...honestly...i'd prefer just to wear them and do nothing...I barely even wash them anymore...they actually don't get terribly grubby even in tough conditions.
I think you probably could...but I'm not convinced it will stay liquid long enough to work well that way. Not too sure though...I have melted beeswax into my boots before and it makes kind of a mess...it requires really working the wax and eventually digging out the stuff that's caked on.
If my wife complains about the wax or the hair dryer next time she needs the car fixed she can fix it herself. It's about co-existence in the matrimonial deal we all have.
Ok... because the next time she irons wax onto her cute little black dress before a night out with the girls, I can assure you it might not go so well. Yes.. co-existence.
Was no problem. No need for doing the work twice. Just add the wax, melt it in and move on. No big deal...I've done 2 heavy coats and it worked fine...
Hawk Tools sells Fabric Wax designed to last for years. We use a proprietary mixture of Beeswax, Natural Oils and Pine Tar that leave a durable and water proof layer on most any blended or canvas fabric.
FYI, you can wax all cotton and cotton-polyester-blend materials with that Fjällräven wax. The fancy-sounding "G1000" is just a regular 65%-35% polyester-cotton blend fabric. Many outdoors jackets and pants are made out of such fabric. It is the cotton that soaks up the wax. Oh yeah, and you shouldn't wax the elastane-polyester parts (the black, stretchy panels).
I'm about to wax my vidda pro's; a very useful and practical vid so thank you kindly for the upload.
Hawk Tools sells Fabric Wax designed to last for years. We use a
proprietary mixture of Beeswax, Natural Oils and Pine Tar that leave a
durable and water proof layer on most any blended or canvas fabric.
if they don't soak the water after wax so, what happen when you go hike in 80-90 degree ? you're gonna melt inside or boil. Are they even breathable after wax?
I gotta be honest...I will probably never wax mine again. The wax didn't last long and really didn't add much water resistance. Fjallraven has a spray as well that I am very interested in trying. It's what they use on the KEB line.
I waxed my jacket with 2 light coats and used 6gm of the 90gm bar. In used a hair dryer which I find a better method
Quick question, im a bike commuter and thinking about doing the process to a few of my garments for when the weather is bad, how does the garments feel after using these particular bar of wax?
The garments don't feel bad...they'll loosen up quickly, but I have to admit I wasn't very impressed at how the wax held up, or how it actually performed. People might get better results than me, but I still got absolutely soaked...I wore my trousers in the snow without snowpants and I got drenched...it was wet snow, but it didn't help all too much. Still worth trying it though...it aids in fabric toughness longterm.
@@outerlimitless I do not believe this pant is rated for winter/snow/wet snow. They are a Spring and Fall pant (according to the sales rep). I also wanted to say that the pant is not treated with any toxic chemical to make the pant waterproof.. thus the wax. This product does not harm the environment, a key plus about these pants.
Having used a heat gun and an iron, my vote is on the iron. Much more uniform finish. But, not are effective. Take care.
Yeah, I was ok with the hair dryer, but I can see the iron working well. I just didn't want to hear my wife yell at me when she got wax on her clothes!! Haha, thanks for watching!
This is excellent, thanks!
Glad to help!! It works pretty well, but it's certainly not waterproof by any means.
Lol, I jst tried waxing a Swiss M70 Alpenflauge field jacket. Forget it. I must have spent an hour just on the hood. I think the G1000 is doable but this coat's material is far too thick and not nearly as tightly woven which is a must. Oh well live and learn.
By the way this surplus jacket is unbelievable for being less than $20 Canadian. Essentially a load bearing vest built into the coat...its just insane.
It takes a long time for sure! I'm tellin ya...to do a good job is quite a bit of work. I'm curious about the jacket...I'll definitely take a look. Thanks for watchin!!
Do you do this after every wash? Or like every 3 washes? Thanks for the vid!
I've only waxed them the one time...to be honest it was almost a waste of time. I guess if it toughens up the fibers then it's worth it, but don't expect these pants to be water resistant. They were during my video, but the first time I wore them after waxing them was in one of my videos...it was the March hike to Flat Mountain Pond...it was snowey and sleeting and I got completely soaked. It's still worth trying it though...I'd suggest giving it a shot to see if it works for your needs.
A golden rule is after 3-4 washes. Then the wax will have worn off.
Try to wash cool by hand and it will last longer. A wash on 40 gets rid of all the wax
Dont wash them brush off debris. And put them in the freezer overnight. If really smelly. Smoke them.
I am going to wax my Vidda Pro trousers just like you did. I have a silly question,do you iron them after you wax them and if you do what is the setting on the iron? I am a guy and new at this. thanks.
I'm not sure about the iron, but the hair dryer worked well. I'd say just experiment with the iron, but start low...if it melts the wax, you're good. I would not go too high at first. I can tell you that it's almost not worth waxing them unless you're into doing it for the project. Mine got immediately soaked and after a wash it's like the wax was never there...I don't think I will wax them again. But, honestly go for it anyway...it's not gonna hurt...actually strengthens the fabric, and it's one of those things...the more you do, the better you get at other projects anyway. So good luck!!
The box the wax comes in states low/medium heat, without steam.
Great gear ..Longevity.. Tip !!!
Apply Wax. Turn garment inside out. Place in dryer on high for 15 minutes. Repeat. Hair dryer is too long, and an iron will get ruined.
Seems like a pretty good plan...does it leave any wax in the dryer?
no....because it's turned inside out.
@@outerlimitless Just make sure he doesn't tell his wife it was your idea 😳
IRONS DO NOT RUIN POLYCOTTON. You're like the 4th person I've seen that said something to that effect. Just stick it on a low cotton setting, and you're FINE. Even Fjallraven says you can use an iron. I have no idea why people think an iron will damage polycotton material.
Got three pairs of these !
You gotta get the vented ones if you haven't yet...they have a different pocket arrangement and are worth checking out.
I did the same job as you. I tried to test the waterproof of the garment under the rain, not under a tornado and... Fuck it doesn't work.???i repeat three times and still not work. Wtf I'm going mad. I'm gonna take it no more. I've barents Pro pants and I used the g1000 greenland wax. I really cannot understand. The pants are now really stiff and heavy cause the wax, looking like Leder biker pants. Any tips guys??? What I did wrong?
YES, I agree with you completely. I got totally wet the first time I used them...was in a reasonable snow...not even rain. The good news is they dry out fast. They wax will break in eventually and the pants will soften again. Just keep wearing them. I will never wax my G1000 again. I think it's useless.
Fjällräven clearly states that waxing your garment will not make it waterproof, just water resistant. The wax makes the fibre more abrasion resistant.
love the vids by the way
Thanks!! I'll do my best to keep it up!
Why not just spray them with ScotchGuard and be done with it?
Scotch guard is GARBAGE! Try this and you'll be blown away.
Just melt the hole block and paint it on! Rubbing little bit on does not do much.
thx
Why not forget the wax and just stick them in the washer.... wash with Nikwax Tech Wash first to get them clean, leave them in the washer then wash them in Nikwax Cotton Proof.... gotta be easier than messing about with wax?
The was is a pain in the ass...honestly...i'd prefer just to wear them and do nothing...I barely even wash them anymore...they actually don't get terribly grubby even in tough conditions.
more wax = less breathability
could you melt some of the bar and paint it on?
I think you probably could...but I'm not convinced it will stay liquid long enough to work well that way. Not too sure though...I have melted beeswax into my boots before and it makes kind of a mess...it requires really working the wax and eventually digging out the stuff that's caked on.
@@outerlimitless it has to fuse with the material in order to work. Wax on, melt in.
If my wife complains about the wax or the hair dryer next time she needs the car fixed she can fix it herself. It's about co-existence in the matrimonial deal we all have.
Ok... because the next time she irons wax onto her cute little black dress before a night out with the girls, I can assure you it might not go so well. Yes.. co-existence.
"Impregnation" oh hell nawwwaawwwhhhh
I did that a few times....haha!
Jesus, don't follow this guy's method. Put 2 light coats on instead of a shitload on one coat! That's why he had leftover residue
Was no problem. No need for doing the work twice. Just add the wax, melt it in and move on. No big deal...I've done 2 heavy coats and it worked fine...
Hawk Tools sells Fabric Wax designed to last for years. We use a
proprietary mixture of Beeswax, Natural Oils and Pine Tar that leave a
durable and water proof layer on most any blended or canvas fabric.