I mean my range days consist of replacing zipties as they melt off. This solution offers a lot less smoke and less time remembering where I put my spare zipties.
It's not as if there isn't 30 other identical items on the market, by dozens of manufacturers that serve the exact same purpose or anything. Is this just fawning for acknowledgment in the chat by the content creator, or have you not purchased firearm accessories this decade? Magpul is only relevant because of their mags, and the fact that most manufacturers release completed firearms using the furniture. This is more fluff that none of us really desire or need.
@@innawoodsman Eh, it'll be fine. What's the worst that could happen? Seriously though, I think in most cases, unless you hit it with a waffle-face hammer, it wouldn't go off. As I understand it, the primer requires a piercing force, rather than a blunt blow to the rear.
I have a couple of the old school magpul\ noveske short throw safety levers, and I'll definitely be buying the new version. Also nice to hear about something new other than another daka pouch.
@@shooteveryday1841 yeah but it looks iffy. I mean its a massively overpriced rubber band that has a cable notch that probably will fail soon after you use it. Id have to see it on someone else's rifle first. Def not buying the Strike Ind crap to experiment with.
Mike Jones, I just got some bang bands the other day and the work. Not perfect but they are very strong and make a nice securement point for a sling as well
That stop is pretty cool. You could mount it 180⁰ opposite of your 45⁰ offset (irons or reddot) this would come in handy for zeroing and making precise shots when running an LPVO. Good stuff. Now they just need to come out with an Mlok Bayonetta lug/attachment and ill be happy.
@@pezimore M9 Bayonet, like they put on the mossberg 590's, I've also seen them on M16 A1 and A2 variants they attach via a barrel clamp system. I've never seen one that attaches to a free floated handguard, but assuming you're handguard is very rigid and securely mounted, I don't see why someone couldn't make an Mlok or Picatinny mount for one.
@@pezimore as it turns out Geissele Actually makes both an Mlok and a picatiny rail mount for an M9 Bayonet, and Sig makes a pic rail version. When I replied above I realized if never actually looked for one, so I did some searching and yeah their still being made and for sale. Looks like my AR just found its next accessory.
@@pezimore HB industries makes aftermarket handguards out of Machined 6061 Aluminum, and they also sell a more stout barrel nut to make it more rigid, I've never handled a scorpion, so I couldn't say for sure but id think that should hold an m9 Bayonet (depending on exact model is going to be around 14oz)
I want my barrier stop to be all metal... same with the selector lever... Also I prefer a lever with fewer parts. The Wire management product looks good.
Those of us with big hands need the stubby ones for an ambi option that doesn't get blocked when using it right handed. A standard length, even with a MOE grip, hits the 1st knuckle of my trigger finger and stops cold.
Wonder how the selectors will compare to the Radian Talon? *Also* Is the little red indicator on the tip removable? Looks as if it would be a good safety feature for people new to the platform.
The red tip is the forwards edge of the pin that holds the levers to the cylinder, that said, they will come in black and red so you can pick whether you want black or red tips, also I’m hoping it’s better than the old magpul AR selector(sold by noveske) which was big bulky and being a non 90 with a bulky right side it would stick into my hand messing with my grip
Man, I just zip tie my pressure pad cable around the light instead of to the handguard. I don't see anyone else doing that but my wires are completely out of the way. I like the safety selector, as long as I can make it non ambi, ambi safety selector sucks.
I think I'd prefer the handstop had a rubber tip 🪠 instead of the metal spikes ⛏. If those spikes land on a metal or cement surface, I don't think they would be very secure or very quiet.
Your marketing team is unreal. One of the few companies that's actually in touch with what people need.
Not going to lie, I’m kinda impressed by these new products announced over the past few days
Same, Magpul has their thinking caps on.
Seriously, the R&D guys deserve raises.
magpul is going to make so much money with the wire control kit. Instant purchase, no brainer, everyone needs one, everyone wants one.
Honestly, tho. I’ve always steered away from wired switches. Now I’m reconsidering.
They certainly aren’t the first, and they don’t look like the lowest profile option or the most versatile routing option either.
The BAD lever is still their best product
I mean my range days consist of replacing zipties as they melt off. This solution offers a lot less smoke and less time remembering where I put my spare zipties.
It's not as if there isn't 30 other identical items on the market, by dozens of manufacturers that serve the exact same purpose or anything. Is this just fawning for acknowledgment in the chat by the content creator, or have you not purchased firearm accessories this decade?
Magpul is only relevant because of their mags, and the fact that most manufacturers release completed firearms using the furniture. This is more fluff that none of us really desire or need.
"Adjust and customize set selectors without screws or tools" Proceeds to pull out a punch to tap out the set pin. - Magpul
I could be wrong but a tip of a 556 round May do the same thing. I think it may be spring loaded and not an actual pin that is removed.
@@Berserkable ok. Now install it without any tools
@@sluttybutt they said install it without tools not remove it without tools LMFAO
@@Berserkable I wouldn't tap on the back of a 5.56 round with a hammer though. Just a thought
@@innawoodsman Eh, it'll be fine. What's the worst that could happen?
Seriously though, I think in most cases, unless you hit it with a waffle-face hammer, it wouldn't go off. As I understand it, the primer requires a piercing force, rather than a blunt blow to the rear.
The barricade stop is brilliant. The selector too.
I feel like it doesn't really do anything a vertical grip wouldn't do...
@@FORGOTENcreatr1 regular grips will slide around more. This way looks like it will grip surfaces better. Like different feet for bipods.
I love my K2+ grips and CTR and STR stocks. Magpul makes great kit.
Love the barricade stop, a company in tune with what people want
The barricade stop looks really awesome. I might have to grab one
I have a couple of the old school magpul\ noveske short throw safety levers, and I'll definitely be buying the new version. Also nice to hear about something new other than another daka pouch.
I don’t even own an AR yet but, Magpul is becoming one of my favorites for accessories for my future AR!
Go get you one dawg b4 it gets hard to buy, no matter the brand or price you’ll love your first one. I think you’ll make a great rifle!
The wire control kit will be a day 1 buy for me...lets just hope its not a 2025 release.
That’s just how it is. But don’t worry you can buy some new socks or underwear and a new daka instead of the products you want.
I want to see them in person. Zip ties haven't failed me yet 😂
Strike industries sells them right now
@@shooteveryday1841 yeah but it looks iffy. I mean its a massively overpriced rubber band that has a cable notch that probably will fail soon after you use it. Id have to see it on someone else's rifle first. Def not buying the Strike Ind crap to experiment with.
Mike Jones, I just got some bang bands the other day and the work. Not perfect but they are very strong and make a nice securement point for a sling as well
Can we attach a barrier atop to either side of the Handguard so the front of our gun looks like a hammerhead shark?
He’s asking the important questions
@@operatpoor9445 😂
Then you put it upside down so the stock is the tail 😂🦈🦈🦈🦈
Impressed with every magpul product I've ever bought for any platform
That stop is pretty cool. You could mount it 180⁰ opposite of your 45⁰ offset (irons or reddot) this would come in handy for zeroing and making precise shots when running an LPVO. Good stuff.
Now they just need to come out with an Mlok Bayonetta lug/attachment and ill be happy.
what company will make a bayonet to mount on it. standard akm bayonettes maybe? or perharps mosin bayonettes or something goofy like that
@@pezimore M9 Bayonet, like they put on the mossberg 590's, I've also seen them on M16 A1 and A2 variants they attach via a barrel clamp system.
I've never seen one that attaches to a free floated handguard, but assuming you're handguard is very rigid and securely mounted, I don't see why someone couldn't make an Mlok or Picatinny mount for one.
@@pezimore as it turns out Geissele
Actually makes both an Mlok and a picatiny rail mount for an M9 Bayonet, and Sig makes a pic rail version.
When I replied above I realized if never actually looked for one, so I did some searching and yeah their still being made and for sale.
Looks like my AR just found its next accessory.
@@vegeta420z Badass. You think my cz scorpions plastic body would hold up lmao
@@pezimore HB industries makes aftermarket handguards out of Machined 6061 Aluminum, and they also sell a more stout barrel nut to make it more rigid, I've never handled a scorpion, so I couldn't say for sure but id think that should hold an m9 Bayonet (depending on exact model is going to be around 14oz)
That wire management system is exactly what I need! Can’t wait till it’s released
zipties
Imagine buying a $20 dollar piece of plastic to solve a problem that you could have solved with 99¢ roll of tape.
@@agentoranj5858 or a 5 cent zip tie
@@spartanpatriot3163 Where do you buy individual zip ties?
Check our arson Machine mlok wire guides, they are smaller and less expensive and machined aluminum!!
That wire stop is fire… good stuff.
Baricade stop, mandatory on every carbine from now on. Perfect idea.
Hope this will all be offered in OD Green as well!
Love the wire route and new button set up
Definitely getting these....and a bipod
The modular Fire selector switch is ideal 👌🏻
Wire control kit is great!
"Without screws or tools" then uses a punch at 0:19 ................
thought the exact same thing
Wonder if you could use just the tip of a 5.56 round.
great quality-of-life improvement products!
"Smaller packages, bigger unfair advantage" was my slogan in college.
I'm really interested in the barricade stop seems fun
The stop and wire kit look like must have items.
I want my barrier stop to be all metal... same with the selector lever... Also I prefer a lever with fewer parts. The Wire management product looks good.
Barricade stop doubles as a close quarters bludgeon.
Still waiting on magpul P320 mags….
Yeah, I'm ready and willing to throw my money at this.
That barricade is pretty nifty. Something I never really thought about
Magpul is doing it again with innovating new gear. Those wire control clips are going to be 💰.
Manta Defense & Modlite already make clips like that
Wire control kit: *exists*
Zip ties: “am I a joke to you?”
Jk it looks like a nice option for those wanting a more elegant solution.
I like that modular fire selector, I'm tired of so-called "ambi" selectors that are stubby on the right side.
Those of us with big hands need the stubby ones for an ambi option that doesn't get blocked when using it right handed. A standard length, even with a MOE grip, hits the 1st knuckle of my trigger finger and stops cold.
I don’t need any of these but appreciate the effort. My light is a new design that eliminates the cord and pad that makes everything so awkward
My brother and I are always faitful to Magpul's upgrades.
The wire routing will be a nice addition.
Magpul should team up with a paint manufacturer and put out a Magpul FDE spray paint.
Or Magpul FDE cerakote color
@@feraligatorade99 you’re fucking with us, right?
Brownells alumahide is almost an exact match, like 99% match.
Duracoat sells magpul FDE paint.
@@shooteveryday1841 the Brownnells is a closer match.
That’s cool but I want a fold out barrier stop now
I'd really like to see some X95 parts. There's not a lot on the market for the X95, so a Magpul K2 cutlass would sell pretty well.
I’d love to see a Magpul charging handle for the AR. And maybe a cover for the AK charging handle similar to the zenit co type ones
When is this releasing
I'm definitely buying
You know, a roll punch does count as a tool.
When is that wire control kit coming out?
Awesome, happy to see some new, very useful stuff
THANK YOU MAGPUL!!! Once again, MAGPUL delivers the goods. 😀😃👍👍👍👍
I want those barricade stops and wire control kits.
That slogan is great. Smaller packages bigger unfair advantage. Well put!
Any news on when these will be available? Ballpark weeks? Months?
honestly pretty impressed
Make OD Green pmags!!!!
I need all of these
I want that knights!!!
Besides the cable management it's hard to add something new when you already have a Daniel Defense 🙃
Nice job, Magpul!
I'm liking the upgrades for my Daniel Defense.
Goddamn these look great! Magpul once again leads the way!
I want the AR stand, you guys going to offer it?
Damn you magpul ✊️! I would have bought these last year.
Excited for the safety
i hope it has a picatiny mount for the barricade
Selector levers: sold. Haven't been happy with a bunch I've tried. I'll take 4 right now, please. Bulk discount? Thanks. 🙂
Could you tell me what kind of weapon light switch did you use in the video?
Just waiting on the savage 110 long action stock
What stand is at the beginning of the video?
Would it be frowned upon to put 3 barricade stops on the barrel of a gun? Both sides, and bottom?
Like the wire management kit the rest is yeah.
What rail is on the rifle with the barricade stop?
Please make a pistol grip and rail for the X95 Tavor. We need a K2+ X95 grip.
Did someone step on that suppressor?
Magpul, you guys really need to bring back foliage green.
Please tell me the barricade stop comes in pic rail.
I love Magpul
Strike industries makes cable management attachments for M-lok. A little chonkier but do the same.
Strike Industries is imported trash. Magpul is domestically manufactured quality product that's made affordable to the average consumer.
@@d3ltaohniner261 not everything, but yes most of their stuff is imported. Just stating the fact that the product is not unique.
Magpul has become the meta
Nothing I need, everything I want
Does the cord management come in grey ?
Wonder how the selectors will compare to the Radian Talon?
*Also* Is the little red indicator on the tip removable? Looks as if it would be a good safety feature for people new to the platform.
The red tip is the forwards edge of the pin that holds the levers to the cylinder, that said, they will come in black and red so you can pick whether you want black or red tips, also I’m hoping it’s better than the old magpul AR selector(sold by noveske) which was big bulky and being a non 90 with a bulky right side it would stick into my hand messing with my grip
Cool! More stuff Magpul is announcing that we we won’t have for 2-3 years.
What handguard is that?
Magpul continues to innovate! The wire control kit is a must have for me
If it’s magpul. Is it really an upgrade?
Love it, great products !!
I wish that the barricade stop was a little smaller more streamlined but I like it
What handguard was on that rifle?
Dear Magpul please make Pmags for the Mini 14/30
Man, I just zip tie my pressure pad cable around the light instead of to the handguard. I don't see anyone else doing that but my wires are completely out of the way.
I like the safety selector, as long as I can make it non ambi, ambi safety selector sucks.
What brand is the ar?
AKs getting any love this year?
How about the Savage 110 stock that has been "coming soon" for 3 years
Can we for the love of God get p mags in 6.8 spc or non lwrc please
I’m still waiting for my savage model 10 chassis
I think I'd prefer the handstop had a rubber tip 🪠 instead of the metal spikes ⛏. If those spikes land on a metal or cement surface, I don't think they would be very secure or very quiet.
If they were rubber theyd be destroyed very quickly.
@@americanball_2841 The tips could be easily replaceable.
Just the tip
Does anyone know what rail is shown?
Is that the "Homedepot" guy?
Anybody know which rail is featured on the rifle?
Make the ACR type rifle!!
I don't get why the light routing thing exists. My streamlight came with a switch setup and the mounting and wire routing is way cleaner than that.