CHEW THE FAT! CHEWING UP SOME MASSIVE FAT STUMPS WITH THE TMC CANCELA!
Вставка
- Опубліковано 12 вер 2024
- Well this got INTENSE! We are trying to chew down some MASSIVE pine fat lighter stumps as well as some big red oaks stumps that need to GO! The TMC got the job done but to wore the teeth down to the NUB!
Instagram: idigit4
Need heavy equipment or a mulcher? Call www.carolinaco...
704-363-6432
USE PROMO CODE: IDigIt
#mulching
#stumps
#satisfying
Super Munchie does an excellent job! I love watching it completely wipe out stumps 😊. It makes me wonder what kind of inventions will be around in the next 50 years.I can't believe I am in awe of a machine.
Tough stumps. A country boy will survive.
You dont use the edge of the mulcher that much, can you move the cutter teeth from the edges to the middle to save you some money?
Stumps be gone - that mulcher is fantastic - makes life easier.
You sure do a good job on every video.
You should win streaming awards for your content dude.
Great Super Munchie has a BIG appetite and the teeth to chew his food up!👍👍
Boy, that machine really made fast work of those stumps.
We need IdigIt4 tees and sweatshirts! I happen to like your logo which would nice on a t-shirt.
You Should try the double edge carbide teeth 😊
“Yeah Baby!” Makes Noise, Goes Fastest! “I WANT One!”😂
Thanks for sharing, those stumps must be petrified my friend! Sending prayers and positive vibes to you brother! Kirk from Louisiana! 🙏🏻🙏🏻🙏🏻👏🏻👏🏻👏🏻👏🏻👌🏻👌🏻👌🏻👍🏻👍🏻👍🏻👍🏻👍🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸👋🏼
Well that's a lot easier than using a stump grinder great job great video thanks Davin
Huh? That job was crying out for a stump grinder with carbide teeth. I’m not talking about one of the toy grinders, but a commercial grade unit. It would be faster and grinder a lot more of the stump. The last one I used could reach 18” below grade. This property owner will have holes in his landscape as the leftover wood below grade rots away over the next few years.
love the upbeat music on the time-lapse farther into the video. it really goes well with the mulching ! great job !
I seriously think you are lucky to have the use of the TMC mulcher Davin, I don’t think any other mulcher can handle these stumps like the TMC! I’ve watched videos on mulchers and this one seems to be the most durable and quickest recovering mulcher !
That job was crying out for a stump grinder with carbide teeth. I’m not talking about one of the toy grinders, but a commercial grade unit. It would be faster and grind a lot more of the stump. The last one I used could reach 18” below grade. This property owner will have holes in his landscape as the leftover wood below grade rots away over the next few years.
We are only grinding the stumps next to the ditch as to dig them up would destroy the ditch banks. All the other stumps are being removed. By grinding the tops of the stumps next to the ditch we are leaving the root systems in tact so that will hold the ditch banks together until new vegitation can grow that will reduce erosion.
That baby is chewing it up brother, I love this thing! I know you do too or I’m pretty sure you do! lol 😂. This is the best test of all! 👌🏻👍🏻👍🏻👌🏻
I would have thought that you wouldn't want to get the teeth in to the dirt, but I don't know everything
Getting it done sir. Good job!!!!
Good job
One if the smallest ones with a rotten core seemed to be one of the worst, but a good job none the less.
Hey ya'll. Happy Holidays. Let's get this dude over 100k. Subscribe!
Awesome let's go! Happy Holidays!
Awesome job
Nice to hear some good music brother and the Timelapse part, you always pick good music! 👌🏻👍🏻👍🏻
Love the music in this video! I noticed it’s the same as in the greenhouse vid. 😊
Yes it is!
I like that hose protector on the mulcher!
Holy smokes...the teeth are pretty shot. GREAT JOB getting them stumps.
Love me some "munchie". Eat those stumps baby.... great video!
Hey dude i love the munchie vlogs but just one thing !
When you are mulching stumps you put the head down the stump
to fast and it stops the head turning or slows it right down and you have to back off
If you lower it down very slowly it will keep turning and get threw the wood better 👍
TOTALLY ENJOYED WATCHING THE VIDEO DAVIN 😊
Good video again🇺🇸👍😇😇⭐
It might be easier to drill a hole and light a fire in the stump. Most of it would be burnt out below the ground. I've found this to be a very effective method for clearing stumps.
You now know what they mean when they talk about hard wood. LOL. Those stumps that were so hard appeared to be wild cherry which is a very hard wood.
Great video that grinder is a beast
Very nice job,machine is impressive,but helps having you run it.just keep doing what your doing.👍👍👍😎😎😎
That was SO much fun!!
Great job, I noticed some stumps were much harder
To munch,
Work on a farm for 20 years my main job was flailing Road sides ditches and hedges the flail mower had 4 belts on it and yes tell tail signs that belts are on way out oh yes and on a farm there are loads of belts on most equipment plus I've somehow got a mechanics background oops
Is it expensive to replace the grinding teeth?
Very ex ..couple of hundreds depends diamond,carbide ,or tungsten . .normal wear you just sharpen with grinder or reversal teeth on some models..😅😅😅 as well straight shaft teeth cost 3-5k 😅😅
They aren’t as expensive as you might think. Growing up my grandfather always told me a knife is useless if doesn’t have a sharp edge.
I was gonna say I thought you were stalling the head more than normal so was thinking they were hard.
What’s the advantage/disadvantage to starting low and working up vs top down Davin?
I think dry dirt/stones/clay was the one that chewed up the teeth, there was a lot of it around the stumps.
Love that setup as well davin, i definitely need an 120 and a concella, or the prinoth im not picky
The ASV is an awesome machine and both the Prinoth or the TMC Cancela are both great heads. Would recommend either!
Great video!
Very Nice Work
At 1:20, it's a beautiful cloud pattern! Closed Captioning says the drone of the machine is music... I don't disagree. lol
Hi buddy
Good job and video Brother
Thanks Jeff!
@@idigit4967 you’re welcome brother
Is that iron wood holy crap.
IS it considered efficient to grind stumps with a drum mulcher? Since it kills the teeth how do you charge for a job like this? Price per stump?
I mean, if that's the tool you have, it seemed like it did a good job. But the Fecon Stumpex is fun to see in action, too :)
Depending on the stump grinder this is much more efficient. When you go subsoil depending on your terrain you might run carbides in the center.
A hard day Davin.
hello Devon it's is randy and i like yours video is cool thanks friends Devon friends randy
Saya sangat suka alat ini
Dand Devon, thoser must of been some nasty stumps to grind those teeth down the way a lot of those teeth ended up. YIKES!! Personally I would not try and push another job out of her, without getting new teetch, just to be on the safe side and not damage your machine. just saying.. God bless.
How often do you sharpen teeth
Just here to see how many people say you shouldn't grind stumps with a mulcher.
🤣 yeah me too LOL
You once called carbide teeth useless, but how about now?
I never said they were useless in general, just useless for what I do in my area. Context is everything homie.
16:02 you need to stop doing time lapse you're wrecking the VIDEO'S by doing that. I love the sound of the tree's being chipped up and the grinding up
When belts sqeal like that there to loose or totally gone and need changing for someone to say its normal has no idea 🤔
And how many hours do you have running forestry mulchers....?
Good work fantastisch men you te best fried Top 🚜🚛🪤😎🎧🎄👍🌤🧤🍻🪵
I would have thought that you wouldn't want to get the teeth in to the dirt, but I don't know everything
When bidding a job you look at time, area and the biggest thing is wear on your knives. Anyone as seasoned as Davin knows and accounts for all these things. Main priority is achieving the end result the client is looking for.