Awesome video as always. Magnus broadheads are fantastic and speak for themselves. Thank you for the videos and taking your time to teach this stuff. If I win I’d love a pack of black hornet 125 grain 4 blade. Thanks again!
Congrats, brother!!! Send me your address either by message on FB, Instagram, or email and I'll get them shipped out to you ASAP! Congrats again and best of luck!
125 grain stinger buzz cut 4 blade, took my 1st deer this fall with those on the front of my Easton axis. I was only able to find a single 3 pack before the season.
Looking to build new arrows in 2021. Plan to go with stinger or stinger buzzcuts. Will decide on 100vs 125 gr once I figure out what new bow likes to eat!
Can we stealth strip the inside of the holes to eliminate the metal on metal sound? 🤣🤣 But that new broadhead coming out in 2021 in 125gr would be amazing.
I have 100gr Black Hornet Serrazors and live them. My dad tried the 125gr Stinger Buzzcuts and couldn't get them flying with his Xbow. I'd love to try the 100gr Buzzcuts.
A good topic for your next can of worms video (if you feel like putting yourself through another one of those lol) would be crossbows. There are lots of compound guys that just have an extreme prejudice against crossbow hunters going as far as petitioning to stop them from hunting. I feel this comes from a really uneducated perspective on the topic. I'd be more than happy to provide the objective nuances of the subject.
I am a sharp knife 'nut'. I constantly check knives...so much so, I see a knife block in someone's home. Eventually, I will pull a knife and check the edge. knives or blades do not necessary go dull, they need to be maintained "honed"; the edge has rolled. I think that needs to be clarified. There is a difference between: honing and sharpening. I absolutely luv the Lansky Sharpening System, can't wait to add this to my kit...plus, I'm a huge fan of wet sharpening. If you use Sandpaper....over 240grit. Purchase Autobody sanding paper. This was brilliant...As has become AJA form....easily explained and visuals were Great
#MagnusBroadheads Razor Sharp, 100% Lifetime Guarentee, and built like a rock! Would love to try the new Snuffer three blade heads. I shoot magnus a lot so I have some, but never have shot the Snuffer 125gr but my favorite so far is the stinger ser razor 125gr or even the 100gr... Either would be awesome!!!
Hi!! If you want to find the factory Edge, use sharpie, and the marker on the edge will show you when you're at the right angle. Kme is much better than Lansky, of course its more expensive. But if you're a hunter, you will sharp your hunting knife as well. Diamond "stone" is better than the rela stone, because it's doesn't get hollow after time. Kind regards Robert Kind regards Robert.
I have a Lansky that I used to use for knives. I've never thought to use it for my broadheads... I currently shoot the straight-edge Black Hornets in 100 grain. I'd like to try out the ser-razors next. I'm already subscribed and following on IG!
I would like to try the 150gr stinger buzzcuts or the 125gr black hornet ser razors. I just liked and followed magnas broadheads on Facebook and subscribed to your channel. Thank you very much for the opportunity. Good luck to everyone in the contest and in the woods.
I would love to have the new #magnus snuffer broadhead's, magnus come razor sharp out of the package, they are some of the toughest on the market. I bought the black hornet's and the stingers, but I would love to have a pack of the three blade Snuffer's!!! Nice video man...been awhile. I never win but I can hope can't i!??..lol
Great job explaining the sharpening process. I am looking forward to obtaining some Magnus stinger 125 grain four blade broadheads to try with my recurve bow.
I'd like a set of 125 gr. 4-blade Stinger buzzcuts. The Black Hornet Serrazors did a great job this season. Too bad my shot placement was less than ideal...
Nice video. I wanted to try the Black hornet Ser Razor 125g heads for this season, but the COVID delays set delivery back 6 weeks. I missed my window, so I will have to wait until next year to give them a go.
Oh no I am a day late! Loving the videos trying to take my archery tackle a step further. But just in case, I'd love a pack of magnus hornet 4 blade 125 grain! Thanks! Happy new year!
I’m 12 years old and am looking for some broadheads to go hunt with. Im looking for my first bow deer and am hoping to take it down with the Stinger broadheads in a 150 grain to get some higher FOC for my low draw weight.Good luck everyone!
I've been using Lansky Sharpening kit for over a decade. You might want to clean out your stones with warm water & soap to clean to out the pores (done occasionally, when they get really dirty & a paper towel won't work.) .
I switched to Magnus buzzcut 100 grain broadheads very impressed with the performance of the heads and of course snorting some fairy dust. Can't beat free😉😉
We use sandpaper in woodworkiing a lot for sharpening. I'll go as high as 8000 grit for planes and chisels. I strop with .25 microns diamond paste, I use Lansky on all my knives.
Well I didn’t make it in time for giveaway 😂 but any way figured I’d mention that edge pro has a kit to level stones once you make them to a bowl I’m sure would still work for any stone. I have just gotten an off brand guided system which works fine but the stones are junk actually was able to put edge pro stones on and all I can say is they are really nice quality stones that don’t seam too expensive. I can’t say anything about lansky stones as I have never used them but if lansky doesn’t have a kit for leveling the stones you could check out the one from edge pro it would extend the life of your stones saving some extra cash. My question to you is that if you were able to level stone back up to get more life out of stone would you still use sandpaper or just simple use stones more?
Or you can just buy new blades. hahahaha. Blades are cheap. Once you start removing metal you start changing the weight. Not worth all the hassle. Buy new blades
Im not to familiar with the magnus i use iron will but if I were to win id definitely go for the heaviest 2 blade they offer keep up the great work nate I've been following you for quite a while an took ur opinion's on the iron will and the tethrd setup and have been very happy with both recommendations.looking forward to getting back out into the pa woods next weekend good luck to anyone still grinding it out
You would have been better off and had better structural integrity of the edge had you just used sand paper on the steeper angle up to 1000g, then stropped it.
There is no point to start on wrong angle it just gives you more work. also if you want really sharp blade dont ever go against the blade with the stone or anything, do it inside out only.
Hi Jack, Before I say anything about the broadheads, I would like to say this: Thank YOU for what YOU do for the archery community. Archery has been my sanity project for the entirety of 2020. I have upgraded my bow, sights, strings, releases, rest, stabilizers, and strings. Your videos helped to guide me in my selection. I appreciate what you do in the archery community. I work on my bows at home, and there is so much value in the content you provide. Especially for the average jack, like me. Thank YOU, sir. Now, I would be very happy to take Magnus Black Hornets 125 grain 7/16 X 1 1/4 into the field next season. These heads have always caught my eye. I just do not have a shop near me that sells them. Again, Thank you.
I really like how the 125 grain stinger flys. Hoping to take a deer out next week with it. Enjoyed the sharpening tutorial. I’ve got one using the stay sharp system on my channel. Seems to follow the same concept as well. Great video though!
Is it only the glassfiber arrows that can "explode" and go through your hand or is the carbon arrows also a risk? I'am really interested in compound archery and wonder if i should stick with aluminum as a beginner.
I would want any pack of broadheads from magnus!.. I have bought one pack of black Hornets so far and really like them. I'd love to win a pack of them would be pretty awesome. I'm excited now to see what they are coming out with next! I think I already follow them on Facebook but I check to be sure. Awesome video man.
I picked up a Lansky leather strop to go with my kit as well as the serrated blade stone. Both great tools to go with the kit. I just picked up a pack of QAD Exodus to try out and they are super sharp out of the box. I’m hoping to try them out on turkeys this spring to see how they fare vs the Black Hornet which I shot my last turkey with. Got a pass through but the main blade got gouged pretty bad. Of course Magnus sent me a new head for free. I’ve been impressed with the holes the Exodus leave from other people’s reviews with it being a 1-1/4” three blade and it seems like a very tough head.
@@averagejackarchery I traded off a few of my Cutthroats for three Iron Will solids and I wasn’t really impressed. They didn’t fly well at all compared to my VPA three blades and cutthroats and the blades just didn’t seem worth the $99 a pack price. Sold them and got the Exodus to try.
Awesome video as always. Magnus broadheads are fantastic and speak for themselves. Thank you for the videos and taking your time to teach this stuff. If I win I’d love a pack of black hornet 125 grain 4 blade. Thanks again!
Congrats, brother!!! Send me your address either by message on FB, Instagram, or email and I'll get them shipped out to you ASAP! Congrats again and best of luck!
Nice video on broadhead sharpening.
125 grain stinger buzz cut 4 blade, took my 1st deer this fall with those on the front of my Easton axis. I was only able to find a single 3 pack before the season.
Stinger Buzzcut 150grain! Been studying ranch fairy and bought all the jigs to build my own arrows. Haven't decided on the broadheads yet.
Looking to build new arrows in 2021. Plan to go with stinger or stinger buzzcuts. Will decide on 100vs 125 gr once I figure out what new bow likes to eat!
Can we stealth strip the inside of the holes to eliminate the metal on metal sound? 🤣🤣
But that new broadhead coming out in 2021 in 125gr would be amazing.
Black hornet. for sure awesome broadheads 👍
I have 100gr Black Hornet Serrazors and live them. My dad tried the 125gr Stinger Buzzcuts and couldn't get them flying with his Xbow. I'd love to try the 100gr Buzzcuts.
A good topic for your next can of worms video (if you feel like putting yourself through another one of those lol) would be crossbows. There are lots of compound guys that just have an extreme prejudice against crossbow hunters going as far as petitioning to stop them from hunting. I feel this comes from a really uneducated perspective on the topic. I'd be more than happy to provide the objective nuances of the subject.
Buzzcut 150 grain 4 blade, please
Fellow pa bowhunter here. I would do a 125 grain stinger for penetration. I am s2itching to fixed blade, i have had too many iseued with mechanicals
125 grain black hornets are my favorite, but I think a solid blade version of it in 125 or 150 grains would be fantastic!
I am a sharp knife 'nut'. I constantly check knives...so much so, I see a knife block in someone's home. Eventually, I will pull a knife and check the edge. knives or blades do not necessary go dull, they need to be maintained "honed"; the edge has rolled. I think that needs to be clarified. There is a difference between: honing and sharpening.
I absolutely luv the Lansky Sharpening System, can't wait to add this to my kit...plus, I'm a huge fan of wet sharpening. If you use Sandpaper....over 240grit. Purchase Autobody sanding paper.
This was brilliant...As has become AJA form....easily explained and visuals were Great
Magnus seem like top notch construction, currently in 2022 they are experiencing up to 8 week delivery issues.
#MagnusBroadheads Razor Sharp, 100% Lifetime Guarentee, and built like a rock! Would love to try the new Snuffer three blade heads. I shoot magnus a lot so I have some, but never have shot the Snuffer 125gr but my favorite so far is the stinger ser razor 125gr or even the 100gr... Either would be awesome!!!
Hi!! If you want to find the factory Edge, use sharpie, and the marker on the edge will show you when you're at the right angle.
Kme is much better than Lansky, of course its more expensive. But if you're a hunter, you will sharp your hunting knife as well.
Diamond "stone" is better than the rela stone, because it's doesn't get hollow after time.
Kind regards Robert
Kind regards Robert.
I have a Lansky that I used to use for knives. I've never thought to use it for my broadheads... I currently shoot the straight-edge Black Hornets in 100 grain. I'd like to try out the ser-razors next. I'm already subscribed and following on IG!
I would like to try the 150gr stinger buzzcuts or the 125gr black hornet ser razors. I just liked and followed magnas broadheads on Facebook and subscribed to your channel. Thank you very much for the opportunity. Good luck to everyone in the contest and in the woods.
I would love to have the new #magnus snuffer broadhead's, magnus come razor sharp out of the package, they are some of the toughest on the market. I bought the black hornet's and the stingers, but I would love to have a pack of the three blade Snuffer's!!! Nice video man...been awhile. I never win but I can hope can't i!??..lol
Man I geek out on this stuff lol Magnus 100 grain Hornets would be my choice..keep up the educational videos teach!
Great job explaining the sharpening process. I am looking forward to obtaining some Magnus stinger 125 grain four blade broadheads to try with my recurve bow.
I'd like a set of 125 gr. 4-blade Stinger buzzcuts. The Black Hornet Serrazors did a great job this season. Too bad my shot placement was less than ideal...
Nice video. I wanted to try the Black hornet Ser Razor 125g heads for this season, but the COVID delays set delivery back 6 weeks. I missed my window, so I will have to wait until next year to give them a go.
Oh no I am a day late! Loving the videos trying to take my archery tackle a step further. But just in case, I'd love a pack of magnus hornet 4 blade 125 grain! Thanks! Happy new year!
I’m 12 years old and am looking for some broadheads to go hunt with. Im looking for my first bow deer and am hoping to take it down with the Stinger broadheads in a 150 grain to get some higher FOC for my low draw weight.Good luck everyone!
I've been using Lansky Sharpening kit for over a decade. You might want to clean out your stones with warm water & soap to clean to out the pores (done occasionally, when they get really dirty & a paper towel won't work.) .
I switched to Magnus buzzcut 100 grain broadheads very impressed with the performance of the heads and of course snorting some fairy dust. Can't beat free😉😉
We use sandpaper in woodworkiing a lot for sharpening. I'll go as high as 8000 grit for planes and chisels. I strop with .25 microns diamond paste, I use Lansky on all my knives.
Could use another pack of stinger buzzcut 100 gr 4blade. Thanks for the sharpening tutorial, very helpful.
I need Stinger Buzzcuts, 4 blade 150. I HOPE they are putting out the Black Hornets Ser Razors in 150 grains!
Magnus Black hornet - I am subbed that how I saw this. I have the stinger. Want to try the hornets
I never win anything, but the best broadhead's in the world is the #StingerBuzzcut 125 or 100 grain!!!???
I also have a Lansky and use it to sharpen Swhackers. Right from the box they’re sharp. After the Lansky at 25 degrees, scary sharp.
I’m shooting 150g Buzzcuts. Wouldn’t mind trying the ol foamers 125g ser razors
Well I didn’t make it in time for giveaway 😂 but any way figured I’d mention that edge pro has a kit to level stones once you make them to a bowl I’m sure would still work for any stone. I have just gotten an off brand guided system which works fine but the stones are junk actually was able to put edge pro stones on and all I can say is they are really nice quality stones that don’t seam too expensive. I can’t say anything about lansky stones as I have never used them but if lansky doesn’t have a kit for leveling the stones you could check out the one from edge pro it would extend the life of your stones saving some extra cash. My question to you is that if you were able to level stone back up to get more life out of stone would you still use sandpaper or just simple use stones more?
Or you can just buy new blades. hahahaha. Blades are cheap. Once you start removing metal you start changing the weight. Not worth all the hassle. Buy new blades
Jack I just wanna lyk u r one of the best on the internet helping us. Seriously fucking props to you. If you have a patron I’m definitely tipping
I would like to try Magnus stinger killer bee 150 grain. Good luck everyone. great information channel
4-blade 125 grain Stinger Buzzcut
Great video and broadheads!!!
Another good video AJ!
BTW... when you reach puberty that beard will come in thicker! :)
That is so wrong .. you never go from a high angle to a low angle . Why ? You’ll never hit the apex . Go from low to high it’s called a micro bevel .
125 grain Magnus ser razor would be next for me! I use a 150 grain Magnus buzzcut that I like to hone in nice and scary 👌
If I were to win my favorite broadhead is the stinger killer bee buzzcut 4 blade 100 gr. It’s a solid main blade so it’s a little quieter.
Im not to familiar with the magnus i use iron will but if I were to win id definitely go for the heaviest 2 blade they offer keep up the great work nate I've been following you for quite a while an took ur opinion's on the iron will and the tethrd setup and have been very happy with both recommendations.looking forward to getting back out into the pa woods next weekend good luck to anyone still grinding it out
Very informative vid bud. If I won I would love some black hornet 125 4 blade thank you.
A big reason I watched this was to see how much metal you took off vs the final weight of the blade. I'm very disappointed you didn't weigh it!
Oh. And I use the Lansky pedestal. Strokes are 12-8-5-3 on each stone both sides equally.
Switching to fixed blades, 125gr Black Hornet Ser Razor (4 blade) is the one for me!
Nice If I’m selected, I would like a pack of 125 grain stingers buzzcut thanks again for all the work that you do
My favorite head, not terribly expensive but I haven't broke one yet, and I buried one in plywood repeatedly just to try barely lost it's edge
150 grain black hornet supposed to be coming out, that’s what I’m waiting on.
125 grain stinger buzzcuts, I took 2 deer with them this season. Absolutely the best broadhead for me.
You would have been better off and had better structural integrity of the edge had you just used sand paper on the steeper angle up to 1000g, then stropped it.
Those stinger buzzcut 150 2-blades look mean!
Stingers & Buzzcuts have a 20o profile, as per Magnus.
There is no point to start on wrong angle it just gives you more work. also if you want really sharp blade dont ever go against the blade with the stone or anything, do it inside out only.
Really instructive in his video. Very cool sharpening system.
If I won I'd like the 125 grain 4 blade Black Hornet Ser Razor
I’ve always wanted to try out the 125 grain 4 blade black hornet ser razor
Hey brother you’re alright , I’d play hot wheels with you any day might even let you use some of mine lol
Buzzcuts 125-grain 4 blades... Love em!
150 gr Magnus stingers and Awsome videos keep them coming
stinger buzzcut would be awesome to try on a whitetail. Good luck to all!
Nice content. I'd like the Stinger buzzcut please.
Would love to try the 125 BH ser razor.. really like your videos.. keep it up
Hi Jack,
Before I say anything about the broadheads, I would like to say this: Thank YOU for what YOU do for the archery community. Archery has been my sanity project for the entirety of 2020. I have upgraded my bow, sights, strings, releases, rest, stabilizers, and strings. Your videos helped to guide me in my selection. I appreciate what you do in the archery community. I work on my bows at home, and there is so much value in the content you provide. Especially for the average jack, like me.
Thank YOU, sir.
Now, I would be very happy to take Magnus Black Hornets 125 grain 7/16 X 1 1/4 into the field next season. These heads have always caught my eye. I just do not have a shop near me that sells them.
Again, Thank you.
Most welcome!!! Thanks for the kind words!
I use the 100 gr black hornets, and I'd love another pack.
Stinger Buzzcut 150 grain 4 blade is on my list to try
Great video. Black Hornet Ser Razor 125 for me.
Great video. Would love to try the black hornet 125 4 blade.
Those black hornet look prett deadly would like to give them a try.
Stinger 125. Thanks for the info
I'll bite - 100 grain magnus buzzcuts.
The stinger Buzzcut 150 gr looks great to me!
I really like how the 125 grain stinger flys. Hoping to take a deer out next week with it. Enjoyed the sharpening tutorial. I’ve got one using the stay sharp system on my channel. Seems to follow the same concept as well. Great video though!
great video! Stinger Killer Bee 125 grain 4 blade broadhead
Buzz cut. My son loves his and would like to try some
I've been looking to try out those stinger broadheads. good luck to everyone trying to win!
Would love to try 125 grain stinger 2 blade!
I want to try out some magnus 125g stingers on a higher foc arrow
Currently shooting buzzcut 100s. I would probably try out 125s with a new arrow build. "Why would I know anything?" (wearing Magnus hat)
🤥🤥🤫🤫🤭🤭
Buzzcut stingers 125 grain
I'd love to win the heads... but shipping to Canada would break the bank lol
So much sadness. :(
Black Hornet ser razor 100gr 2 blade!
What about a montech style fixed blade?
Black Hornet Ser Razor 125!!!!
Is it only the glassfiber arrows that can "explode" and go through your hand or is the carbon arrows also a risk?
I'am really interested in compound archery and wonder if i should stick with aluminum as a beginner.
Carbon arrows are incredibly safe. The biggest issue is when folks get creative, don't maintain ntheir equipment, and decide to shoot damaged arrows.
Magnus Black Hornet Ser-razor
Would love to try some buzzcut 125s!
Would you choose Black Hornet or Stinger for Deer?
(600 gr. Total arrow weight on a 300 spine Apollo)
Either with that setup!
Sharping skills are mandatory with bowhunting if you respect the game you hunt. Well done sir.
Well said!
Snuffer ss I like the 3 blade 100 gr
buzzcut heaviest you can find
I always liked 3 blades. Snuffer looks like a broad head I should try! But then the jig doesn’t work for those?
Different method for those! Perhaps the easiest method of all actually. Tex Grebner has a great video on sharpening Snuffers.
Black Hornets are the Shiz.
I’d try the black hornet ser razor
I would want any pack of broadheads from magnus!.. I have bought one pack of black Hornets so far and really like them. I'd love to win a pack of them would be pretty awesome. I'm excited now to see what they are coming out with next! I think I already follow them on Facebook but I check to be sure. Awesome video man.
The 125 ser razor 2 blade. Here's my question do you use oil on your fine and ultra fine stones?
Yes! Have for years.
125 Black Hornets
I picked up a Lansky leather strop to go with my kit as well as the serrated blade stone. Both great tools to go with the kit.
I just picked up a pack of QAD Exodus to try out and they are super sharp out of the box. I’m hoping to try them out on turkeys this spring to see how they fare vs the Black Hornet which I shot my last turkey with. Got a pass through but the main blade got gouged pretty bad. Of course Magnus sent me a new head for free.
I’ve been impressed with the holes the Exodus leave from other people’s reviews with it being a 1-1/4” three blade and it seems like a very tough head.
Exodus is definitely in my top 5 of all time fixed heads.
@@averagejackarchery I traded off a few of my Cutthroats for three Iron Will solids and I wasn’t really impressed. They didn’t fly well at all compared to my VPA three blades and cutthroats and the blades just didn’t seem worth the $99 a pack price. Sold them and got the Exodus to try.