Z900 Z Cup Racing Graphics Kit - M Designs Motorsport
Вставка
- Опубліковано 25 жов 2021
- Fun, flashy, cool, and more stop light attention grabbing than I expected. Leave a like if you like it. You can skip to the 32:00 minute mark if you just want to see the results and final commentary. The installation and sticker placement might not be interesting if you are not doing an actual install. This video is much longer than I had originally intended.
This is a documentation of the install process of the M Designs Motorsport Z Cup Racing Graphics kit. Both vendor badges and colors are customizable to whatever you use or want to support. In this video you will find placement for all stickers and notes on the install process. Sorry about the windy audio at the very end. I hope you get some useful info from the video! Go make some cool sh!t! That is what it is all about.
Difficulty level on a scale of 1-10:
8 if you have no wrapping skills.
2 if you have wrapping skills.
Tools used:
1. #8 wrench for removing front reflectors
2. #5 Hex for removing the rear fender/chain guard.
3. A vinyl smoothing tool of some sort that will allow you to push vinyl into a crevice without damaging it.
4. A heat gun.
Product Page:
This fits a 2020 and 2021 Z900. It should also fit a 2022 as the body has no changes. Kits for older and other model Kawasaki bikes are also available from the vendor. en.mdesignsmotorsport.com/kaw... - Авто та транспорт
In case you are wondering why all Z Cup races feature racers with the exact same outfits and pretty much the exact same graphics, the rules are below. They are assigned almost all the bike and suit graphics by the race promoters and do not get paid to wear the stickers. In fact, they pay to register for the races. While the stickers on my bike all represent products actually on the bike, or in use in conjunction with the bike, it does not mean anyone needs to be sponsored to have a Z Cup sticker kit with vendor stickers. Not even the racers are sponsored. The racers have limited spaces where they can apply additional graphics. So don't take yourself too seriously while making your graphics choices. Just make it look cool.
Official ZCup Graphics Rules below. Link to full rules: zcup.pt/es/regulamento-zcup-2021/
2.14.1 On the bike
All surfaces occupied by the Graphic Kit are for the exclusive use of the promoter and its partners, where the radiator sides and the bottom of the numbers are specifically reserved for the Trophy Media Partner as an attachment:
The parts of the Graphic Kit applied to the radiator side covers can be replaced by other equivalents for the individual sponsors of the pilots.
The remaining surfaces of the bicycle can be used by cyclists for their individual sponsors as long as they meet the conditions described in this point.
2.14.2 In Pilot
The entire surface of the suit provided by the promoter in the context of the entries, in particular the shoulders, chest, back, legs are for the exclusive use of the promoter and his partners.
The surfaces of the forearms can be decorated with individual pilot sponsors, as well as helmet, boot and glove decoration.
2.14.3 At the ZCUP headquarters
All the space and surfaces covered by the ZCUP space, whether in the wells or in the paddock enclosure itself, are for the exclusive use of the promoter and its partners.
It is allowing riders to show, on the site that is intended for them in the pits, a roll-up of up to 85cmx200cm with individual sponsors.
2.15 Participation
Only pilots with a valid subscription with which they are their valid sports license, with the Start Permit (if applicable), equipped with the official ZCUP suit (except in the ZCUP PaP 2021 mode but limited to 3 race weekends will be able to participate ), with the respective bicycle in accordance with the technical specifications described in this Regulation.
The deed must be in good condition, namely the emblems of the trophy sponsors, whether these technicians or others, and the bicycles must also be in good condition, with special attention, among other items, to the engine guards, the weighings and the Graphic Kit, that is, the pieces that have the numbers.
Super clean
Great!!!...👍🏻
🤩 wow!!!
perfect
Great video, looking to get a set myself. Did you go for Matt or gloss stickers?
I used Gloss stickers. I hope they go one easy for you.
I'm looking z900 belly pan v2... hard to find mostly for v1
Looks super clean!
Where did you buy your passenger Cover?
Thanks! I got it off of Amazon. Make sure you check the packing so you don;t throw out the rubber pieces: www.amazon.com/gp/product/B098XH96Y5/
nice and good video bro! Did you remove the original stickers first?
Thanks! I did not remove the original stickers.
nice work bro and pleas if you have a design of that module format jpg or pdf or real dimension
please
Thanks! I'm not really sure what you are asking for. But if it is about the sticker sheet, I don't have any measurements.
super clean! is your bellypan also from them?
Yes. The belly pan is also from them. I have an install video for it also. Thanks for the compliment!
@@OakInch where did you get the kit?
@@guillaumedebruyne2022 en.mdesignsmotorsport.com/eng
@@OakInch could you help me out, got the same bike and would like to order the same kit but so many options
@@guillaumedebruyne2022 Sure.
Kit Used: full linea zcup kit with the white Kawasaki background on the tank.
Color 1 on mine is Dark Red.
Color 2 is white hexagon.
Color 3 is white
Sponsor 1 is Dunlop
Sponsor 2 is Motul
Frontal is Empty
Large Text Box: GLOSSY VINYL
Front Number is No (I made my own numbers)
Belly Pan: Matt Black(although i see they are out of stock now.)
Belly Pan Graphics Kit:
Color 1: White
Color 2: Dark red
Type: Back Matt
Sponsors are Dunlop, Motul and Showa, but I put a gopro sticker over showa.
Super..where did you buy this sticker?
M Designs Motorsport
Why’s the back seat so fucking high
Just how they made it I guess.
@@OakInch they made a bike that’s comfy for the main rider. But the backseat sets them above your shoulders for what? So the passenger can endure torture while the main rider has no back issues? Wow. Your back seat doesn’t even look usable.
@@Illness.og. The backseat isn't usable. It was replaced with a cowl. The rear is a little high for passengers in general. I have never seen a review where they said how great the back seat is.
@@OakInch I know. That’s my issue I know I can upgrade the rear seat to a gel seat but I am referring more to the passenger riding position then the actual seat. Which I know it hard as rocks lol