शिक्षा के इस मुद्दे को उठाने के लिए news 18 और विवेक जी का बहुत-बहुत धन्यवाद. बिहार के शिक्षा व्यवस्था माध्यमिक स्कूल से लेकर कॉलेज, यूनिवर्सिटी तक कहीं भी अच्छी नहीं हैं। जब सरकारी स्कूल सरकार दी ही है तो प्राइवेट की जरूरत क्यों है क्योंकि सरकारी स्कूलों में पढ़ाई नहीं होती मैं अपना नामांकन सरकारी और प्राइवेट दोनों स्कूलों में करवा रखा था लेकिन सरकारी स्कूल में सिर्फ पोशाक के पैसों क लिए जब कभी जाता था और अभी कॉलेज में हूं लेकिन कॉलेज में टीचर कहते हैं पढ़ाने के लिए लेकिन वहां टाइम पर सिलेबस खत्म नहीं होती और सरकारी छुट्टी बहुत होती इसलिए मैं तीनो साल प्राइवेट कोचिंग ही किया
I have a question about this... after completing stressing ,while releasing, master wedges sometimes struck in strands. I saw one worker pulling the master wedges from inside the jack , how could you release the wedges if struck... why dont use the back block ??
Ghulam Murtaza once the ram is retracting it releases the pressure off of the master wedges. If a wedge on the steel head slips or breaks the master wedge will catch the strand then it will be impossible to pull the master wedge off by hand. Instead of destressing though... you cut the strand that is stuck 3 inches long behind the ram/master wedge that’s stuck. Then get a torch and burn the middle wire of the strand (the strand consist of 7 intertwined steel cables one being in the middle the other six around it) so burn the middle one and it will cause the strand to collapse and blow out the back end...( it usually just gets caught with all of the other stressed strand) once you do that. The master wedge that was once stuck will be worthless lolbut the ram will be able to come off of the cables. Tada.
शिक्षा के इस मुद्दे को उठाने के लिए news 18 और विवेक जी का बहुत-बहुत धन्यवाद.
बिहार के शिक्षा व्यवस्था माध्यमिक स्कूल से लेकर कॉलेज, यूनिवर्सिटी तक कहीं भी अच्छी नहीं हैं।
जब सरकारी स्कूल सरकार दी ही है तो प्राइवेट की जरूरत क्यों है क्योंकि सरकारी स्कूलों में पढ़ाई नहीं होती
मैं अपना नामांकन सरकारी और प्राइवेट दोनों स्कूलों में करवा रखा था लेकिन सरकारी स्कूल में सिर्फ पोशाक के पैसों क लिए जब कभी जाता था
और अभी कॉलेज में हूं लेकिन कॉलेज में टीचर कहते हैं पढ़ाने के लिए लेकिन वहां टाइम पर सिलेबस खत्म नहीं होती और सरकारी छुट्टी बहुत होती इसलिए मैं तीनो साल प्राइवेट कोचिंग ही किया
thanks for uploading this video.I heard about post tensioning but did not see.now my doubts are cleared
Thank you so much
Please keep uploading such videos.
🙏🙏🙏🙏🙏
Very nice live illustration of post tensioning। , Thanks
Thanks for the video. A question- How come the wedges are removed? I thought they hold the strand in place.
Haven't experienced stucking of wedges ever as the jack comes to its original position the wedges remain outside the jack
Thank u for giving total detail process
very informative...thanks a lot
Thanks for the video.
What this is the company name
Hum bhi ase he work karate he.. Master bej me Mom bhi lagate he... Bhai cable cutting thik ni he...
Bhai grauting me lime water use karte he kya ap...
Y clean with lime water
How much pressure applied to remove the slack of ht strands.
I think this is at new Mumbai Metro? Post tensioning of Y Blocks(viaduct).
I have a question about this...
after completing stressing ,while releasing, master wedges sometimes struck in strands. I saw one worker pulling the master wedges from inside the jack , how could you release the wedges if struck...
why dont use the back block ??
are you engineer?
what is your question?
Destress the cable
Ghulam Murtaza once the ram is retracting it releases the pressure off of the master wedges. If a wedge on the steel head slips or breaks the master wedge will catch the strand then it will be impossible to pull the master wedge off by hand. Instead of destressing though... you cut the strand that is stuck 3 inches long behind the ram/master wedge that’s stuck. Then get a torch and burn the middle wire of the strand (the strand consist of 7 intertwined steel cables one being in the middle the other six around it) so burn the middle one and it will cause the strand to collapse and blow out the back end...( it usually just gets caught with all of the other stressed strand) once you do that. The master wedge that was once stuck will be worthless lolbut the ram will be able to come off of the cables. Tada.
Holding devise to keep the tensioned cable in position also be shown
Grauting pump and mixar
Nice
We are the manufacturer of wedges and tensenor and croper
what process is used for removal of entrapped air n water...?
Air you don’t worry to much about because it’ll later get grouted.. but water can be blown out of the grouting holes via air pressure testing
@@anthonyrenemolina grouting means filling slurry into segments rht after allignment done post tensioning
great
Master wadges are reusable??
Sir pr tensioning aur post tensioning ma tendons 20 ya 50 years k baad loose nahee hotay?
अगर सरकार की दी गई व्यवस्था में अच्छी पढ़ाई होती तो लोग प्राइवेट स्कूल और कोचिंग में अलग से क्यों पैसा खर्च करते
sir PSC girder ka elongation Kasey nikal tey hai ?
Is this Dynamic prestress company?
Amit Palande freyssinet system
Sir what is post tension and its use
Muhammad Ahmad it’s the future of steel
Force over tonnage
N e ed Ht stand supplyer
sir ye Pune ka hai kya??😂😂
Mayank chowdhary .ap
Mayank chowdhary g
Banyak ribet
151