Tian Sheng - Airbus A380 - 4000mAh 3S SMART Pack - Flight, Crash, & Repairs
Вставка
- Опубліковано 26 вер 2024
- Differential thrust was not getting the plane to fly straight due to a new fan on the outside left EDF. You can see the results in my failed landing attempt, which lead up to the crash. I just can't seem to win with this plane!
Airliners are their whole own world. Suppliers and stock are constantly changing. For the most current information, please visit...
www.brianphill...
--Preferred Electronics--
Tx bit.ly/3J05xSj
Rx bit.ly/3IUja5l
4S bit.ly/3vfqW4i
--Alternate Rx--
Lemon amzn.to/34Zehs9
A3 amzn.to/3yX2Mww | bit.ly/2UYmlBM
--Airliners Playlists--
Airbus A320 bit.ly/30shwlS
Airbus A330-600 bit.ly/30o8ma4
Airbus A380 bit.ly/2WAfAGV
Boeing 737 Max 9 bit.ly/3jjR0Ul
Cessna Citation II bit.ly/3hdxBT9
J65 bit.ly/3QnwkdQ
--Mini Airliners Playlists--
Airbus A380 bit.ly/32FG5hE
Boeing 747 bit.ly/3eKgO8G
Boeing 787 bit.ly/2OGfwkg
Boeing C17 bit.ly/2ZHMmYn
Cessna Citation Longitude UMX bit.ly/30u9ZD5
Support Us
/ brianphillips
www.paypal.me/...
bprc.me/YouTub...
bprc.me/Beginn...
bprc.me/Horizon
bprc.me/HorizonEU
bprc.me/TowerH...
bprc.me/FMS
bprc.me/AMain
bprc.me/Amazon
bprc.me/ArrowsRC
bprc.me/Banggood
bprc.me/BitgoH...
bprc.me/BuddyRC
bprc.me/EXHOBBY
bprc.me/FairRC
bprc.me/RCGoing
bprc.me/Turbin...
bprc.me/Ground...
bprc.me/EBike
✈ Please visit www.BrianPhill... to see a complete list of our affiliates.
We may earn small commissions when you purchase from our links, helping to support our UA-cam channel and our family of six! Thank you!
#rc #airplane #airbus
You’re great! The genuine article. Honest, humble. You’re unafraid to show and admit mistakes. You learn from them and teach us. One of the very best RC channels on UA-cam!
I'm so glad you see it this way, and I'm very happy to hear it's being well received. Crashing is regrettably part of the hobby; repairs are not too far behind ;) I want to share to good with the bad. These situations are the spice of life!!!
Brian Phillips, definitely! Great flights, bad flights, great landings, bad landings, crashes, fixes, it’s all fun! But your unedited genuineness is what really speaks to people, especially in an age of fakeness. Thanks so much!
Wife; "What happens when the 'nose -gear' falls off in flight, and I have to go look for it!?"
Husband; "What?".....🤪🤣🤣🤣❤️
You caught that? Was the pregnant silence that noticeable???? LOL
She is usually right ;)
This has to be the most luxurious RC workshop
Wait till you see my REAL work shop :) For the record, I can't wait either, it's been a long time, and I really miss my old shop :(....
I bet it will be a real beauty!
Can’t wait to see it hopefully on your exclusive tour of the opening!
Left turn,SLOW,LOW did you expect something,anything else.Your videos are just great.Cheers.
This plane was a beauty, but always needed some extra juice, and after I lost the stock fan(s) it was never the same ;( Fortunately, she now lives in a new home, where she will be loved more ;)
At least everybody in the airplane survived 👍👍overall good flight excellent footage coverage from the camera crew📽👍. Brian Megan hope you guys had an awesome Labor Day weekend.🦨
Thanks Brian ;) You too!!!
Brilliant video and awesome commentary well done guys
Thanks Chris! Wish I could just get it right with this plane!!!
This is entertaining. Great content lol. I've never built or flown a model airplane before but still entertaining to watch. Sorry for the crash, it's for the content! lol
Thanks Jason! Glad you're here with us, and if you like this, we have literally THOUSANDS more where that came from ;) Hope you'll be back soon :)
See that i am not the only one with the RC break or lose, fly away curse! Lost my Eachine micro F4U Corsair🛩️ over the weekend with a fly away, no recovery of the plane 😱😭...Thanks for sharing ! ☠️🐾🐾🐾🖖
You're welcome! I would have rather shared a perfect flight and wonderful landing, but I want to be genuine.
@@BrianPhillipsRC And thats what its all about! SEMPER Fi!
Reminds me of flying the Twin Otter....must have power in a bank. I also think with that plane, you need more runway and less obstacles since it does not maneuver like an acro. Very scale indeed. I do get great repair tip from you!
Brain tried to make a good landing on a bad approach that time. Circle to land on his home VOR. Lol. Great video for pilots.
Baron pilot here
yep, Terry, I could have made some very small changes to my flight and came down with a beautiful landing, but I made a couple bad choices, which lead to a crash....oh well, live and learn. One thing I always say is that you learn more from a crash than from a successful flight. I'm always learning ;)
Erich - Glad you could get some good out of my perpetual mishaps with this beauty ;)
Nice to see you back with this plane Brian. Looks really NICE.
It looks nice, but would be nice if the edf fan repair I did would have been just slightly better...
Interesting, you had a benign engine failure prior to V1, and aborted your takeoff...how very scale of you. Sweet model Brian!!!
I was trying desperately to keep flying, despite the "Captain's" orders - LOL
I didn't even have to replace all 22 tires, as they didn't catch fire or blowout ;)
Low Pass So Cool !!!
I'm sorry I couldn't get better one :(...
Terrain! Pull up! Pull up! Terrain!
😂 😂 😂 😂
I know...again
Such a delicate plane.
I think this particular plane has seen a lot of life, and I can't believe it's in "one" piece...well 7 or 8, but it could be made to be in 1 piece fairly easily. I've had a lot of planes that have gone to RC heaven on much lighter crashes ;)
You and your wife have the best attitude, keep it up y'all
Thank you Sean! You seem like a glass-half-full kinda guy ;) LOL
I was really pulling for ya after the landing gear repair(in this video.) It hurt to see it nose strike on take off again due to landing gear failure.
Yeah, but this plane had a good life, and no biggie!!! She was a total BEAUTY ;)
OMG you're scaring me Brian about flying this once I'm done with all that crazy mod work 😬 maybe I'll just do scale detail and hang it on the celling in the office, I'm kidding of course I'll fly it 😉👍🛩
You can do it. It actually FLIES GREAT!!! BUT you gotta remember, I'd been pushing this plane for years, and the EDF's were not in prime condition. When it's new, it flew really nice!
You should drill a hole on both end and use a small metal rod and glue those 2 together to reinforce it
Isn't that what I was doing? (notwithstanding heat vs drill)
Enjoyed the video thanks
You're welcome!
The trouble with jets with tapered wings are they are prone to tip stall. They need speed on turns. You should be able to buff it up.
Sure
The scheme does make it look very nice. Just keep trying to fly it. I mean crash it, no...fly it. Wait...crash it. No.... definitely fly it!😃lol. AirHammer out!!
yes, exactly.
Need to try the “plastic” that you cure with ultraviolet light....been thinking about getting some for these types of repairs. 🤓
I bet it gets hot when it's setting up still...be careful on foam ;)
Use some coarse all thread. It will screw into both halves of the part with a little CA so it doesn’t unthread
I guess I could use a small screw, and cut the head off, then slot it for a "set screw" kinda feel..then heat it and thread it into the plastic....issue would be that the nose gear needs to line up at the end of all that screwing ;)
Brian Phillips true nothing works quite like new parts. Too bad with planes you have to buy half a plane a quarter of a plane or you just can’t get a part period. To get landing gear brackets for the FMS PA-18 you have to buy the wings. Appreciate the reply
I know it wasn't meant to be, but that was the most humorous video ever. Your attitude is remarkable. Thanks for the life lesson in anger management. :) (😀You) (🤬Me)
LOL - This is me on camera, remember ;)
That thing flies like a champ! Keep fixing it. Don’t let all those sleepless nights of added features and repairs go to waste!! :)
I was thinking of giving it to you....
Brian Phillips I should open an RC plane junkyard! 😂
Hi have you looked to see if there's a RC Boeing 747 if not keep up the good work and keep making awesome content 😀😀
Yes I have. I always have my eye out for RC airliners.
Here's a Boeing 747...but much less cool ;) - XK A150 Boeing 747 amzn.to/2J5nBgl / bit.ly/39XD6Bp
I think your a private pilot too?
Anyway. Ya know then. You can't make a great landing without a great approach.
Looked like Controled flight into terrain. Lol.
Oh for others. CG to far forward fly like crap. To far rear they fly once!!!
Great channel. You got me back into RC.
Safe is so nice. I bought the P51 eachine and now the Citation. Want the flaps too.
Can we add a servo for steering and Rudder?
Thanks
I'm NOT a full scale pilot (yet). I'd like to get into GA, but would FAR prefer to get into ultra lights or powered parasailing. GA is so expensive, and I just don't want my family to have to sacrifice SOOO much to help me live my dreams, but when the kids are grown, maybe that would be a possibility.
As for flaps on the Citation, it's better to add flaps on the Rudder channel, do some fancy programming, then use the aileron channel to drive the steerable nose gear. That's how I did it, and it worked pretty awesome. I also made a small piece of plastic to help make coordinated turns, which is mounted on the nose gear..looks like nothing, since it's clear plastic, but it works like a 10-15% Aileron to Rudder mix...which is exactly what was needed. Ground handling is accomplished by using the ailerons to drive the steerable nose gear,even though you're also moving the ailerons...which is not perfect, but if you're moving fast enough to NEED the nose gear, the aileron are going to be working IE you be flying :)
I feel for you Brian
thanks
I just got through watching the movie “Seabiscuit” so I was really pulling for this plane to find the power to pull off a win on that go-around. Don’t put that horse down! She must fly again. Thanks guys, y’all are the best!
🤔🙄😁😂🤣 👍✌️
LOL - I was pulling for Seabiscuit too....but she will live to see another day ;)
Enjoyed!
Glad ;) Thanks
I thought I had bad days😂 but you take it good you just keep going. I still give you a five star ⭐️⭐️⭐️⭐️⭐️ I was flying my little Sport Cub S 2 and I noticed the gears in the motor were making some noise I didn’t like it. So I blew it out real good and I looked around my car to see if I had some kind of a dry lubricant for it I didn’t want to put oil on it. I had a can of pledge furniture wax I sprayed that inside on the gears what a world of difference so quiet and now the propeller windmills when I let off the throttle it is so much better and it plus it stays clean. I just love it 100 times better. You should try it it’s really cool.🤔😉
That's a GREAT idea, BUT be careful. Some of the accelerants in those cans will eat foam ;)
amzn.to/2DEqFjJ - this works good, but same thing, be careful with the over spray ;)
RC question, but about smaller planes. How do you check voltage on the little 1 cell umx batteries? Thanks
I use the same voltage alarm you see in this setup, but I built a little jumper cable, or I just hold the pins in the connector, if they'll reach. Good question Cindy!
@@BrianPhillipsRC Ty
I love everything other then the landing gear 😆
LOL I know, they're the only part of this model that makes you scratch your head.... BUT if you saw the stock gear, you'd be drooling over how much better they look, even though they're NOT scale...wrong number of wheels, but we tried our best to give it the "look".
It still looks sweet tho !
Love to see how you repair many thanks
You're welcome Tim! I do a lot of it, and try to film some of the highlights. Filming repairs is the hardest part of what we do, but I know so many people enjoy watching that part.
It looks so awesome in the air I don’t know what to say.Maybe change the whole power system. I think the plane is worth fixing up,anyway it’s up to you guys.Great video guys hope your having a good weekend 🦆
Thanks Mike! She does look good in the air!
That’s a very nice rc plane. I wonder where to get one of those. It’s so fun.
I wish I could tell you were - they're probably gone world wide no ;(... Tian Sheng made a great plane. Too bad it was such a lot of work to make it sweet, but then it just didn't fly too many times ;(
Here's some other choices that might trip your trigger...
J65 bit.ly/3EpgpoR + AR637T bit.ly/3OlgIpB OR AR8360T bit.ly/3crfA6H
Citation Longitude bit.ly/3aQIYTq (BNF)
A380 amzn.to/3OviGE3 (RTF)
747 amzn.to/3EREOVC (RTF)
787 amzn.to/3J3Fppx | bit.ly/2y3C1e9 (RTF)
Are them airliners hard to fly are what they look nice and I wouldn't mind having one but you trying to make it look like it was complicated on Landing
I ran out of power on landing, that's why I crashed. The plane is not overly hard to fly, but I had just fixed an EDF fan, which made the differential thrust a little wonky, and I didn't have quite enough YAW control to get the plane to point down the runway....so I aborted, and made that turn into the "bowl"...I had to stay down in it because I didn't have enough power to get over the trees, and I knew I was going to try to land, I just ran out of thrust at the end of the turn, and she did what all planes do when they run out of power...they "land" ;)
Love the vid man
Great! Thanks itay raz!
Hey Brian I'm really interested in the old 380 if you were to decide to retire it you make it look so good when it flies across your driveway so Slow and Low
It looks so good, agreed, but this plane is a commitment ;) Every time I fly it, I have to fix it BEFORE and AFTER - LOL!!!
If you haven't tried Hysol before, it is sick stuff! I'd use it on that front gear. CA is too fragile on that particular application. Sweet plane and awesome videos!!!
Hysol? Is it similar to other epoxy???
@@BrianPhillipsRC www.hisco.com/Product/398457-30769?gclid=CjwKCAjw19z6BRAYEiwAmo64LQlEKxJIIuMUx4TcPQg3OFuglpZEQaPJKOtaQ3li-qpLsF-B7qpDDBoCHn8QAvD_BwE There is a link if you can work with that but yes, i am an apprentice of a 40+year builder and I thought CA was the bees knees until he introduced me to it. Hysol is made by lock tite. It has an 8hr dry time BUT you will not worry about that front gear again! Love your vids btw! You are one of the people that got me into this hobby without knowing also! :)
how are you able to fly in small places aka your front yard i at least need a open field to fly a small plane
Practice and desire.
Would love to get on a live workshop.
I want the HABU jet you showed.
Should I buy a DX8 and bind or take the 2.4 radio.
The RTF is a great option if you're new to the hobby. It's seems pricey, as the RTF, but when you go out and find everything you need, you'll find that it's a pretty good value. Here's one other detail....the DXS that comes with the RTF Habu is very good (surprisingly) and you can dedicate it to your simulator when you DO get a DX8 or DX9 or IX20 :) for your normal flying needs.
Habu STS 70mm bit.ly/3fRaLj7
iX20 bit.ly/38XUA1I
iX12 bit.ly/3h8yQmF
DX9 bit.ly/2OxrIni
DX8 bit.ly/390KOf1
DX8e bit.ly/393nRry
Horizon Hobby bit.ly/38ZFade (If I missed something ;)
Thanks for helping support us, when you get ready to buy this stuff. If you follow the links, you will help to fund our channel, regardless if you're getting a small item, or the most expensive plane. We really appreciate you coming and want to help you have success Terry!
Hey Brian 🖐️ I have a question for you regarding the UMX brick external ESC mod. How can I get in touch with you?
Here.
I LIKE!!!!!
Thanks ;) Me too, but she's left my life for another man :(.... But she's happier there and flying again - LOL
Hey, man. I like your channel. But why did you try to land at the wrong wing direction ? This was basic mistake.
Wind directions change. I don't even remember this flight. I think this was after I tried to fix an EDF, and I never really got it 100%...she was a wonderful plane in her heyday, but it was a TON of work to get her into this condition, and I learned a LOT doing it...but at the end of the day, she let me down one too many times ;(
I can’t believe that huge plane can run on a 3s
Yeah, but it's still a 3S power system ;)
Hey Guys. Very sweet scale plane down to the Rolls-Royce engines!!
Thanks Sean ;) Megan and I worked really hard on those decals!!!
Nice this rc airliner, I'll try someone too
It's a great plane, but hard to get this one...it's ILLUSIVE...if it's IN STOCK, and shipping to where you live, buy it ASAP!!!
Love how 'scale' this aircraft flies and amazed at all the proper surfaces and fan management controls you've incorporated. Here's to squeezing a bit of good karma from this old bird in the future. BTW, your anger management skills are a cut above, puts mine to shame. :)
LOL - I've done this a few times before, with THIS plane, in THIS spot...I'd say I'm well practiced with crashing this plane - LOL LOL LOL
where do you keep all your planes ??
Most in the basement, a few in the office, some in the kitchen. All over the place ;)
How much does that cost what's the cost on that
This plane is kinda hard to come by, about $400 or so, but I have loads of time making it not look like a cartoon.
Hi frend.Can you send me the electrical circuit of this Rc aircraft?
I have videos showing the setup, if you're interested. Check out the playlist for this plane, there's a link in the description to the playlist, and a place to buy one, if you wish.
I watched all your videos but can you send me a diagram of the electric circuit of that Al 737 aircraft?
Link pls where can i buy it
in the description
How much does it cost
Check the link, I paid about $350ish, then loads of additional stuff and TONS of time to make it not butt-ugly like how it came out of the box ;)
did you buy that plane and if you did can you put a link by my comment please
Yeah, this one I did buy, but it's been FOREVER and I modified it to death. It was sooooo ugly at first. We have a LONG playlist, but unfortunately, I don't think anyone is selling it now :(
Hey Brian , i have one of those kind of planes ... glider... flown once repaired 4 times. 😉
I figure there's at least one in each hangar ;)
You will never be bored owning that plane lol ✌️
LOL - I DO get a bit sick of fixing it ;) BUT, if I want to fly it, I need to be more patient. It's so beautiful, it taunts me as I walk by in the "hanger"
Cool 😀
thanks!
Seems like a typical Central Asian flight
I'll take your word for it ;)
Have you thought of doing a giveaway yet
I haven't.
Epic
Can you reverse thrust?
not on this one, but I added all the other cool stuff. Reverse thrust would be a no-go as it would require another channel and I already had to be super creative to get all these controls to work as it is.
Brian Phillips Not to mention be an octopus to be able to operate all of the controls;)
What are you going to do now
Put it in the basement and fix it on a rainy day ;)
I like that I want that that is real nice
Thanks Fred!
Hey Brian, That Thang Is Like A Real Boying Airliner! LMAO
Ummmm, it's an Airbus ;) LOL
Boy-ing ;) Got it!!!
@@BrianPhillipsRC Your A Bit Slow, Butt A Good Pilot! LMAO
My grand tundra does the same, just crashes for no reason... 🥺🥺
LOL
Why do you have to crash every plane?
I don't crash every plane
I wouldn't care what the cost is/was, I'd definitely stomp that 1 into a pile of recycled material! (& Keep the electrics!).
(Off camera, brian & camera crew does the iowa stomp until there is nothing left!)
LOL - No, I sold this off to a good home ;) she lives again, FYI ;)
I thought you were going to crash into your house!
Sorry to let you down!!! ;) I promise to share one when it happens.
I’m sorry to say this but
5:00 That was what Boeing said.
Haha lol its true
LOL - Very nice!!!! "....It doesn't have to be a 'fancy repair'...."
4 CELL!!!!!!!!!!!!!!!!!!!!!!
Not sure the EDF's would handle it.
With all the crashing it's more like a Boeing.
LOL - At least it flies, unlike the full scale A380's - LOL
Ca aint the way
LOL
IH NO!
It's no biggie ;) She'll live to fly again.
Noice 👌:)
Thanks!
Pilot error
yes and defective, crappy EDF, and crappy repair by yours truly.
I would certainly not fly a winged aircraft in that terrain. A Helicopter may be. There are powerlines very close and trees in the area. A real aircraft would not be flown with these obstacles more should da RC plane.
Airbus 380 looks like junk no thank you!!!!
The only think it does well is looking good. This plane has been crashed more times that I can keep track...and it's an exercise in patience as I generally have to fix it before AND after I fly it.
I'm hoping you'll see this comment because I think this will fix your issue with the front landing gear. This stuff is amazing and it works! It's not a gimmick. Found this at a farm show, you can actually drill and tap the stuff. thelastglue.com/. Check it out.
I see most comments in my "Held for review"...but since you're link isn't to any adult dating sites (AKA Porn), then this is no biggie ;)
CHUCK IT
No way it’s fixable
Sorry mate I don't mean bin it. I ment hand launch it Toss it
Oh lol my mistake just misunderstood you since the plane was broken at the end
LOL - I could fix it without too much effort. Wheels up, wheels down is the only way to fly this beauty ;) HOWEVER, I had seriously considered installing strong magnets on each nacelle, and allowing them to "break away" on landing to rid the plane of the landing gear, also then I could slope soar with this plane ;)
Hi Brian, good morning. . . What a beautiful airbus a380 model, could you tell me where I can buy it? Is that the landing gear that it originally brought or did you modify it?
It really is beautiful. . . I like your channel, without a doubt it is a show for all of us who enjoy airplanes.
Best regards.
You can buy them at the link in the description....there's a link to the playlist of other videos about this plane, and a link to buy. They're right there next to each other, sorry about that...but not enough characters in the description on UA-cam to give a full explanation of such things.
I modified everything on this plane, pretty much. Check out the playlist, and you'll see ;)
how much is it and where does this plane sell
Check the description ;)
@@BrianPhillipsRC thank you friend
How’s it going Brian it’s been a little while since I’ve seen the airbus on here. But still always look forward to your videos, always get a good laugh in...lol I hope you and yours are doing good still through this pandemic. How about them new planes coming out the Gripen and the mid 29 and I heard FMS has a euro fighter coming out as well. Hope to see them all on your channel. Have a great day and happy and safe flying!! PS how’s the haying going?
Thanks Seth. We're doing great, despite what the media would have you believe. I even work in one of the "hot spots" of the country, and I personally visit and have visited and WILL keep visiting one of the "hot spots" in our "hot spot". I can't wait till the rest of the country wakes from it's stupor. I'm getting stick of driving in neutral.
As for the planes...Motion RC doesn't want to work with me. Too bad, I've reached out a number of times, and they repeatedly refuse. I guess when I have 1,000,000 subscribers, maybe they'll listen....not holding my breath - LOL ;)
As for the Hay, yes...that's why we've been busy this weekend. I'm about to go and bale the hay. Last night I got all of it raked into wind rows, except for a small triangle on a hill. The dark and dew was making it way too dangerous.
I just uploaded a video showing the last piece of equipment to pass over the bridge ;) Hope you checked it out. We kinda missed showing this from our initial run...so we HAD to get it captured.
We will also showcase our spears, for handling and moving the bales from the back to the front. These mini rounds do take a little more handling than that of a 4X4 bale, but my little 1025R wouldn't be able to make it up and down a hill with a 4X4 (or it would be pretty tough).
Brian Phillips yea Ik this whole thing is stupid and doesn’t seem like anything is going to change for awhile sucks... and for Motion they said there not handing out planes anymore at the moment that’s what James started. I believe there pretty naïve because if it wasn’t for people flying their products I would’ve never owned a motion RC plane it’s sad there so blind to the fact that is what helps them sell O well it’s there loss. And yes I did watch the video as well like I’ve stated before I watch all even not RC videos because your great at what you do and that’s entertain your viewers, And about 70% of the things I own for RC I’ve purchased after watching it on your channel. And I’m glad everything is going well with the hay the season is almost over anyways well at lest where I am. So have a good evening and stay safe always looking forward to the next video...Safe flying.
‘Lack of thrust’
Translation: stalled it
No, this plane has been in trouble for a while. It used to have power, but the "repairs" I made (IE Wrong fan caz I couldn't get the right one) were not sufficient.
I will own up to stalling a plane, but sometimes the plane is just broken ;( I've let this plane go to a good home ;) She is flying again!
So sorry, but still a cool video. Thank you guys.
I'll fix it AGAIN ;) I gotta get some better EDF's for this beauty.
@@BrianPhillipsRC Cool, I do enjoy your videos. You guys put a smile on my face, thank you. Greg
Hello Brian and Mrs Megan aka camera crew, still haven't caught on all you guys videos i will thats a promise. As always well done. I remember all of the build and mods that plane has. Awesome!!!! Thanks for the video keep flying you guys.
No problem! We're glad to have you when you can make it by ;)