How to adjust a E brake ( parking brake) on Dodge charger or Chrysler 300 2011 Till 2018
Вставка
- Опубліковано 6 вер 2024
- I'm so sorry for the horrible resolution it was 1080HD I uploaded i don't know why it wasn't Full HD
I searched too much on Internet how do I adjust my Chrysler 300 Limited 2015 parking brake I didn't see any video. I made this video to show you how to adjust your your Dodge Charger or Chrysler 300 E brake parking brake
you saved my life, I was using my car without the parking brake because it is weak, now that I watch this video my car is like the new one, it helped me a lot Thank you :)
glad to hear that . you are welcome
Dear Ali
The right way is as follows:
PARKING BRAKE SHOE ADJUSTMENT
1. Place parking brake lever in “full released” position.
2. Raise and support vehicle. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE)
3. Remove plug in parking brake shoe support to
access adjuster star-wheel (1).
NOTE: Through the access hole (2), rotate the
adjuster star wheel (1) in the following direction to
expand the shoes outward against the drum.
² Left brake - Rotate star-wheel toward rear of
vehicle.
² Right brake - Rotate star-wheel toward front of
vehicle.
4. Using an appropriate tool, turn adjuster star wheel
(1) until wheel will not rotate (dead lock).
5. Back off adjuster six detents (teeth).
6. Rotate wheel, checking for light drag. If drag is too
heavy, continue to back off adjuster one detent at a
time until light drag is present. Do not back off
star-wheel more than 17 detents from wheel lock.
يعطيك العافية
الله یعافیک
@@AliGravi89 🌹❤
Hi
The gear MUST be in neutral IF it's a rear wheel drive or NO wheels will turn....!!!!!!
Put the gear in neutral IF it's rear wheel drive when adjusting parking brakes...
Thank you so much! I couldn't get my rotor off and knew it was the parking brake. You helped me win the day!
kesky88 you are welcome . thank you for watching
Good job .Thanks. But you must use jack stands man. Don’t just trust the floor jack.
Thank you for the video.
Like others have said, always, always, always use your jack stands before getting under a lifted car.
That way you can make more helpful videos in the future instead of being hurt by a jack that fails.
That's right ✅️ thanks for watching
Thank you for posting this, you have helped alot of people im sure.
Thanks man helped me tons ..
I had to this in order to get my inspection
Nice vid man. I didn't know how to do this, thanks.
I'll take slack adjustments on a tractor/trailer over a car any day lol. Thanks for the video
Your welcome 🙏
Thanks! I was hunting for something like this for a few months.
E.H. Anderson you are welcome bro
Thank you so much. I will be doing this on my 2012 challenger srt8
Did it work the same with your Brembo brakes??
Agreed , nothing more frightening than seeing the floor jack slowly lowering as I was changing a tyre
AMG ALWAYS USE JACK STANDS AND WEDGE BLOCKS WHAT'S WRONG WITH YOU!
ابو علي مايصير تعتمد على رافعة هيدروليك لازم رافعة ثابتة مادري شتسمونها بالعراق . شرحك ممتع جدا واستفدت انا بصدد تغيير البريكات لان شديت وصار ماتمسك كلش . شكرا لك على الشغل الممتع.
شکرا للمتابعة الفيديو.
في الحقيقه نحن نخاطر بل عيراق كلامك صحيح
@@AliGravi89 استمر في تنزيل مقاطع متابعك من السعودية .
@@proclick2204 شکرا انشالله راح أكون مستمر
Yikes you need some Jack stands hopefully the Jack dont give on you. Good video tho
Thank you very much for posting this. Very helpful. Need to do mine.
Thank you. Will try tomorrow
Good job thank you man this halped me too much
Thanks
Helpful
Good movie,thanks
Thank you. Good video!
Do you know if the wire from the pedal inside the car, does that wire go directly underneath and out to the rear wheel or does the wire go into the side panel and wrap around the wires that go into the driver side door?
I had a repair shop remove my door , and I looked at an installing guide for the parking brake. It mentions scuff plate and coal side trim for some reason.
I saw someone remove the side trim of another vehicle and I saw a bunch of cables that also go to the door so I’ll wondering if that’s how the layout is in one of these cars. My brake isn’t releasing fully and idk if it has to do with the wires upfront being partially disconnected.
As soon as I got my car back my parking brake was acting weird , my car was hit, rocker mounding had a little damage but not much. Idk if it was the impact which was tiny under the door or if it was the repair shop moving things around.
Can you give me some advice?
The wire is going underneath the car for sure. If something hits the line under the car, it will damage it .
Also, if wire inside the car tuch the break releaser spring or something it will not working properly make sure it's ok inside
When you push the pedal, is it moving little and not releasing, or is it locked not moving at all
جزاك الله خير
I'm trying to adjust mine but my wheels don't free spin like yours in the video. Is it supposed to be in neutral? I have a 2016 charger.
Theres a hidden clip under the holder in center co sole to put the car in neutral
Is it the Same for the charger 2020 scat Pack?
Yes it's
@@AliGravi89 thx my friend
Its same on dodge journey 2011??
It should be smiler
My emergency brake is stuck.. Is there like a hatch that could have gotten stuck?
Go ander the car and try to lose the adjustment nube and try from inside to realise it
❤❤عاشت ايدك
Awesome
عاشت ايدك علاوي.. ال2010 هم هيج ينظبط الهاند بريك
احمد محمد اي اعتقد نفس الشي اغلب سيارات نفس الشي
Ali Gravi 89 ممنون والف شكر ابو حسين الورده..اني سيارتي بريكهة ابد موزين بدلت فلنجات ودسكات ونفس الشي يكولون بريك الكرايسلر مو مظبوط صح هذا الحجي لو لا وشكرا الك مره ثانيه
احمد محمد البریك بنزات بيها مو دسك و فلنجه نفس مال سيارات الكبيره
Ali Gravi 89 اي بيها دسك والبنزات شغلها بس للهاند بريك شلهة دخل بالبريك وشكرا الك
احمد محمد اني احكي على اي بريك لانه الفيديو على اي بريك. اذا عندك ABS مو كلش زين تقدر تستعمل های الدسکات یصیر احسا اذا ما عندك اي مشكله ويا اي بي اس www.google.iq/search?client=ms-android-samsung&dcr=0&biw=412&bih=358&tbm=isch&sa=1&ei=CL0uWs_TOczSsAehla-QCQ&q=thermoquiet+for+chrysler+&oq=thermoquiet+for+chrysler+&gs_l=mobile-gws-img.3...6266.11536.0.12156.10.10.0.0.0.0.230.1452.0j7j3.10.0....0...1c.1j4.64.mobile-gws-img..0.1.229...0j0i5i30k1j0i24k1.0.NJvkUhx9Hwk#imgrc=Gc8fwxJJDLkZ_M:
عاشت ايدك حبيبي
شكرا
@@AliGravi89 هسة كملت سيارتي مثل ما انت نزلت بالفيديو. بالاول رفعت تاير واحد بعدين شفت التاير ميتحرك بسبب الديفرينشال. وراها شفت الفيديو مالتك وعرفت لازم ارفعه بالجك عربانة وهمزين عندي واحد ووراها طبقت الفيديو.. شكرااا
thanks alot
So on 2014 SRT8 charger !! Is the Er brake on both rear wheels or just the left driver side rear wheel only? Ty
it's the same both wheels
Ali Gravi 89 ty good vid 👍🏼
Ali Gravi 89 so if i have to change e brake ! I then have to buy two kits left nd right ? Ty
@@Rjelectricfingers yes you have to buy both
2014 SRT8 charger has same ebrake system on both rear wheels or only one wheel?
both wheels Same like this one
What will happen if i make it really loose will that mess my brakes up and like the car won’t stop when i push the brakes or what?
nathing going to happen only the E break will not work any more and when you press it will get lose and soft
Thanks bro you’re fucking amazing lmao sorry for my language but my car has been doing this thing where my e brake won’t work even if i press it in or out and the brake pads are stuck and now i can do this and it will let go because i don’t use the e brake so much
سلاو ئةوة حياري بريك ؟؟؟؟؟
بّه لئ عیاری بریکه
سةيارامن گلايزير ٢٠١٢ بريك وئ لة نشيوان باش ناراوستيت دةبيت يلا گيري ب بةمة p هنگي دئ راوستيت وةكي
تة بكةم تةواوة
Dealer trying to charge me $300 saying they need to take apart rear brakes 😒
Bro if break shoe need to replace you going to take apart bout for adjusting it doesn't need only like this video
@@AliGravi89 I know, they’re behind the rotor. They don’t need replacing at 50k
Daing brah you got some hairy ass arms!
Daing bro that's real man heand
God created like that not me so just watch it and like