my chest is wide and I find that inputting the bra-strap to bra-strap measurement mine being 6.25" is so close to the arm hole, it barely has any allowance left. should i add the hemming allowance in that case?
you can always increase shoulder measurement. I sometimes use between 7-7.5 and still get good results. Just make sure your measurements are correct especially your round shoulder measurement, it’s the most important measurement here.
Thanks for the tutorial New subscriber, please am little confused on the sleeve part, after cutting out the first sleeve, u open it and measure 11.5 for the arm hole and later divide by 6 and it gave u 1.9 you times it by 2 =4 for the cir to be Fuller please i want to know why you divide by 6 while ur sleeve circumference is 9
Your video is so through, I think it might help to put terminology in captions because sometimes it's hard to hear what you're saying due to dialect differences but I think putting technical terminology in captions during the first occurrence will help. Thank you for the video
When connecting the dart on the off shoulder to the bust line, it passes through the chest line, so whatever you get after connecting the dart on off-shoulder to bust-line becomes your chest line dart. After doing mine, I got 1 inch on the chest line. Thanks for the feedback, let me know if this is helpful ❤
The waist dart is 0.5 on both sides. To get the underbust dart, add 0.25 to 0.5 =0.75 on both sides of the underbust. So underbust dart would be 1.5(0.75+ 0.75). To get the dart for off-shoulder line, use the underbust dart, mark 1 inch on the side facing armhole and 0.5 on the side facing the CF, then add 0.25 to both sides. Connect these to the bust point, after connecting, the chest dart would be formed. So just measure what you have on the chest line.
To get your chest line , subtract 2 inches from your bust line. That is if your bust line is 10 minus 2 inches, that means chest line is 8 inches. Or measure your armhole depth
Not well explained. Nice outcome. When doing a tutorial u can't assume the viewers know certain things......the purpose is to explain what, how and why. Nice top but I'm completely lost.
Thanks; well explained. But how i did not know how u got ur 9inchs for the off shoulder? Am making this style now, but got confused on the 9inchs explanation 🤔 Please kindly reply 🙏
I will be so glad if you can kindly do another tutorial on the sleeve part cos you were little so fast for me to understand it thank u if possible kindly send me ur WhatsApp number for better inquiry thanks so much
I love the decency of the dress
Very well explained and one of the best off shoulder tutorial have seen.
☺️ thanks 😊
I really like the way you cut this one I really understand thank you❤❤
Beautiful dress,looks good on you 👍
Thanks so much
Thanks for easy teaching
Glad you like it 😊
So helpful ma ,thank you so much
for anyone watching it recently i think she said airstay is what she added to the front. I believe it is a type of interfacing or synonymous
Good job👍
Thank you! Cheers!
Very well explained... thanks sharing.
So nice of you
Hello
Your video is very educative so helpful
Thank so so much
Weldone ma
Pls we need more of you o😁 dnt forget us here
Never😂, I’ll try my best, thank you 😊
Velly well explanation
Thank you 😊
I love this top😍😍😍😍
I’m glad you do, thanks❤
Que belleza de blusa,me encanta ese diseño,gracias por compartir
Bendiciones
You’re welcome, glad you like it 😊
Beautiful 🥰👍🙏
Thank you very much!
Welldone 😊
Thanks 😊
Please if you are joining the dart will you be joining with half inch
Yes, that is the allowance I added while cutting.
Very nice.. a new subscriber
Thanks and welcome
So beautiful
How did you get off shoulder measurements
Wear a bra, measure from one strap to the next at the point you want the off shoulder.
Watch this video: ua-cam.com/video/caUAI7pkVcc/v-deo.html… I showed how to take the measurements in between the video.
my chest is wide and I find that inputting the bra-strap to bra-strap measurement mine being 6.25" is so close to the arm hole, it barely has any allowance left. should i add the hemming allowance in that case?
you can always increase shoulder measurement. I sometimes use between 7-7.5 and still get good results. Just make sure your measurements are correct especially your round shoulder measurement, it’s the most important measurement here.
Please what do you mean by off shoulder line minus ...
Please watch the video and indicate where exactly you are confused
Very precise. Tnx sk much,pls give us a tutorial on trouser ,tnx
Ok coming soon😊
I love your work 😘😍🥰❤️💯,.
Is beautiful ❤️
Pls is it compulsory to paste anything on the lining
And can I use paper gum to do d neck of both d front and back lining
It’s not compulsory.
Yes, you can. Using Paper gum is easier and still comes out clean
Thanks ❤
Thanks to you. I need the tutriel of the sleev of this blouse.
It’s in the video
Thanks for the tutorial New subscriber, please am little confused on the sleeve part, after cutting out the first sleeve, u open it and measure 11.5 for the arm hole and later divide by 6 and it gave u 1.9 you times it by 2 =4 for the cir to be Fuller please i want to know why you divide by 6 while ur sleeve circumference is 9
The 6 is a standard measurement used when cutting full circle.
I didn’t divide it by the circumference
@@riyalandfashion thanks for replying me, Now i understand where you got the 6 but i thought u should have said 6.28 instead lol
Your video is so through, I think it might help to put terminology in captions because sometimes it's hard to hear what you're saying due to dialect differences but I think putting technical terminology in captions during the first occurrence will help. Thank you for the video
Thank you
Please I don’t understand the under bust measurement
How do you get the measurement for one bra strap to the next
Wear a bra, from the point where you want the off shoulder to start measure from one bra hand to the next.
Pls how do you get the dart for the chest line ma
When connecting the dart on the off shoulder to the bust line, it passes through the chest line, so whatever you get after connecting the dart on off-shoulder to bust-line becomes your chest line dart. After doing mine, I got 1 inch on the chest line. Thanks for the feedback, let me know if this is helpful ❤
@@riyalandfashion this passage is still not clear to me
The waist dart is 0.5 on both sides. To get the underbust dart, add 0.25 to 0.5 =0.75 on both sides of the underbust. So underbust dart would be 1.5(0.75+ 0.75). To get the dart for off-shoulder line, use the underbust dart, mark 1 inch on the side facing armhole and 0.5 on the side facing the CF, then add 0.25 to both sides. Connect these to the bust point, after connecting, the chest dart would be formed. So just measure what you have on the chest line.
If you still don’t understand, leave a message here 08133537627.
@@riyalandfashion okay will try drafting out the pattern and get back to you thanks a lot for the help🥰
Can this be use for every sizes
yes, I haven’t sewn it for every size though.
◦•●◉✿What u did here most peoples doesn't show ◦•●◉✿it, they would just show the cutting and ◦•●◉✿that's all. But urs is special. 😍👍✿◉●•◦✿◉●•◦✿◉●•◦
You are just too much God bless you
Explain better for a beginner how u get chest line thks
To get your chest line , subtract 2 inches from your bust line. That is if your bust line is 10 minus 2 inches, that means chest line is 8 inches. Or measure your armhole depth
Let me know if I misunderstand your question
Please is the aim hole depth different from chest line🙂@@riyalandfashion
Not well explained. Nice outcome. When doing a tutorial u can't assume the viewers know certain things......the purpose is to explain what, how and why. Nice top but I'm completely lost.
Noted…I’ll recreate it. Stay tuned ❤
Very true
I wonder oo
Thank you for successfully confusing me even more🙂
Thanks; well explained. But how i did not know how u got ur 9inchs for the off shoulder? Am making this style now, but got confused on the 9inchs explanation 🤔
Please kindly reply 🙏
Measure from one bra strap to the next . I uploaded a video on how to sew off shoulder jumpsuits, I showed how to take this measurement there
◦•●◉✿Love ur tutoring all through, sorry to ask ◦•●◉✿is this the normal u talk or u ve cold cos ◦•●◉✿ur voice happens to be shaking. ✿◉●•◦ ✿◉●•◦✿◉●•◦
❤❤
Pleas I don't understand madam
there’s another video on this
Please redo this construction video. However, your 1st video showing how to draft the pattern was good.
Didn't understood your explanations well especially on the first sleeve
Very much confusing
Your explanation is not clear to me at all. Just wasted my data. Mmmtcheeewww
Not explicit
Nice top but I'm struggling to hear you, please speak out in your next video, because I can't make out what you're saying
Noted 👍
Talk so fast
Too fast couldn't even finish watching
I have same video on my channel
I will be so glad if you can kindly do another tutorial on the sleeve part cos you were little so fast for me to understand it thank u if possible kindly send me ur WhatsApp number for better inquiry thanks so much
08133537627
Thanks