Buenos Dias. Mi señor. Sos un talentoso,hace y explica tus proyectos con sencillez y con una perfeccion. Que hace que se entiendan y enamoran hacerlos.😊 Muchas gracias
I made one of these for a project once. Used my DeWalt trim router...lol...took the better part of a day but the results from one of these rigs is always nice when properly done. Great work, as usual J. Glad to see you again and staying busy and, most of all, safe. Also, I see you FINALLY got some sawdust on you...lol!
Roland you've already made before what I made. Very good. Actually this jig is what I need, not for video. I'm warried about your safety from the virus. I'm safe and do the same things as usual. See you.
Maestro excelente guia, sin embargo me surge una pregunta, cuando la tabla a rectificar tiene poco grosor, la fresa no alcanzara a rectificar? Gracias de antemano por su respuesta. Saludos desde la ciudad de México.
Another good clean build. Had you thought about making adjustable feet height so you can use it for different thickness blocks? And maybe a wider flatter router bit? That slab of tree trunk has lovely grain/ring pattern? What will it be when you've finished it?
I think you could uses a larger bit. When I moved the router quickly on the work face, many marks appeared and surface was rough. Thanks for watching sir.
@@j-woodworking9573 I've done this successfully with my 2-1/2hp dewalt router and a short 1" straight bit with a slight shearing angle. The straight bit is easier to hone (and less expensive) to replace. In my case, I found uneven downward force was making the surface rough. A heavier router seems to be an advantage here, sandpaper of course fixes all this :-)
Hola maestro me gusta la idea , y tengo una pregunta. Se podría hacer una guía así muy parecida para pulir con una pulidora o amoladora, para pulir una piedra de mármol ? Muchas gracias por su respuesta
Hello, nice to see you still made video. Great, I hope you're all right. Nice job, and good idea. In the begining of the video, what is the tool you use to pre-drill ? It seems to be usefull
Очень много альтернативы.Пластик, подшипники ,много.
Buenos Dias. Mi señor.
Sos un talentoso,hace y explica tus proyectos con sencillez y con una perfeccion.
Que hace que se entiendan y enamoran hacerlos.😊 Muchas gracias
I made one of these for a project once. Used my DeWalt trim router...lol...took the better part of a day but the results from one of these rigs is always nice when properly done. Great work, as usual J. Glad to see you again and staying busy and, most of all, safe. Also, I see you FINALLY got some sawdust on you...lol!
Roland you've already made before what I made. Very good. Actually this jig is what I need, not for video.
I'm warried about your safety from the virus. I'm safe and do the same things as usual. See you.
Hello
I had to wait until the end of the video to understand the usefulness of the router tool !! it's very smart !! 👍
Thank for this vidéo !
Thanks for watching sir.
I'm happy to see you again.
유용하네요. 높낮이 조절은 루터 비트의 길이로 하나요?
지그는 기본 높이를 제공하고 있으니 나머지는 루터 날을 움직여 조절합니다
감사합니다
Maestro excelente guia, sin embargo me surge una pregunta, cuando la tabla a rectificar tiene poco grosor, la fresa no alcanzara a rectificar?
Gracias de antemano por su respuesta.
Saludos desde la ciudad de México.
간만인듯합니다. 잘보고 갑니다. 계속 기대할께요
다시 뵐 수 있어 기쁩니다
감사합니다
영상 잘보고 있읍니다 핸드그라인더에 사용하는 원형 샌더홀더는 어디서 구매할수 있나요?
철물점이나 공구점에서 구할 수 있습니다 .
감사합니다.
Another good clean build. Had you thought about making adjustable feet height so you can use it for different thickness blocks? And maybe a wider flatter router bit?
That slab of tree trunk has lovely grain/ring pattern? What will it be when you've finished it?
Thanks for watching sir. You will be met by the next video soon.
Nice jig! Would it work as well if we use a larger router bit or would it leave too many marks or too hard on the router?
I think you could uses a larger bit.
When I moved the router quickly on the work face, many marks appeared and surface was rough.
Thanks for watching sir.
@@j-woodworking9573 I've done this successfully with my 2-1/2hp dewalt router and a short 1" straight bit with a slight shearing angle. The straight bit is easier to hone (and less expensive) to replace. In my case, I found uneven downward force was making the surface rough. A heavier router seems to be an advantage here, sandpaper of course fixes all this :-)
Hola maestro me gusta la idea , y tengo una pregunta.
Se podría hacer una guía así muy parecida para pulir con una pulidora o amoladora, para pulir una piedra de mármol ?
Muchas gracias por su respuesta
Пианино?!😮
잘 보고 갑니다. 자체 높이 조절은 불가능 하니 루터날의 조절 한계로 가능 하지 않은 목재는 하부 지지목을 바꾸거나 해야겠네요. 하부 지지목이 아닌 사이드 지지목으로 높이 조절이 가능하게 만들면 어떨까 조심스레 의견내봅니다.
좋은 의견 감사합니다
저도 같은 궁금증!
지지목 곁쳐끼우고 뺄수있게 만들면 두께 조절도 할수 있을것같아요
Simple and practical. Very good
Thanks for watching sir.
I look forward to see what you do with that piece of wood.
Thanks for watching sir.
I'm doing next project with the jig.
Dry nicely done worked well just need to use a larger flat router bit makes a much better job when flatting large timbers 😀😀😀
Thanks for watching sir.
진짜 좋은거 만드셨네요 굿굿
감사합니다.
선생님의 영상을 보았습니다. 대단한 실력이더군요. 조금만 더 견뎌보세요. 좋은 결과 있을겁니다.
@@j-woodworking9573 격려의 말씀 감사합니다..^^ 안전 목공 하세요..
Excelente, gracias
Thanks for watching sir.
question: would I be able to use that jig with a Makita Trimming Router? Or does can it only be used with a plunge router? great vid btw :-)
Thanks for watching sir.
You'd better use it with a plunge router.
Hello,
nice to see you still made video.
Great, I hope you're all right.
Nice job, and good idea.
In the begining of the video, what is the tool you use to pre-drill ? It seems to be usefull
Thanks for watching sir.
That's a countersink cutter. Whenever I use screws, I predrill with it.
Gostei da idéia
멋져요!!
혹시 상세싸이즈도 알수있나요??
꼭 만들어버거싶어서요
가지고 있는 공구와 가공하고자하는 대상물에 따라 싸이즈가 다르게 적용됩니다. 아이디어만 얻어가시면 됩니다.
감사합니다.
Simples e eficiente. Muito bom.
Thanks for watching sir.
Well made sir Hope you will tell us what timber the block is in the next project
💙
👋👌💐
Thanks for watching sir.
where did you get the back ground music from
Я щитаю что он идиот при таком большом опыте! Лить масло?
❤