JobStar 2-in-1 Brush Cutter and Trimmer 42.7cc| unboxing and review | offgrid living | Trinidad

Поділитися
Вставка
  • Опубліковано 29 сер 2024
  • Try the free video editor CapCut to create videos! www.capcut.com...

КОМЕНТАРІ • 56

  • @thejoysofretirement-idrisk917
    @thejoysofretirement-idrisk917 4 місяці тому +4

    Hi Sir, there is a plate in the kit provided that you need to put on the head. It is bolted on by the three screws on the head. This will prevent too much grass from wrapping around the head. Great video. Keep up the good work!

    • @JacobandNichVlogs
      @JacobandNichVlogs  4 місяці тому

      Thank you fam 🙏😊

    • @JacobandNichVlogs
      @JacobandNichVlogs  4 місяці тому +1

      Yes , that's the safety as well, I don't use it because it will make me take longer to cut the grass, it takes me 4-6 hours , or 2 days of cutting. Thank you for turning in 😊🙏

    • @joanne9699
      @joanne9699 Місяць тому +1

      Just purchased this. Very good and informative review. Thank you for sharing!

  • @Legacy-bs7eg
    @Legacy-bs7eg 8 місяців тому +4

    11:57 A thing to note with Trimmer Lines, they can be soaked a few hours before usage, in water, to aviod premature breakage of the line while in use, as the line is hygroscopic

    • @JacobandNichVlogs
      @JacobandNichVlogs  8 місяців тому +1

      Hi fam 👋😊 Thanks for sharing this tip with us 🙏

  • @yolandedick1587
    @yolandedick1587 8 місяців тому +4

    You are so knowledgeable about these things i really learn a lot from your vlogs

    • @JacobandNichVlogs
      @JacobandNichVlogs  8 місяців тому

      Happy to share and happy to help 😊🙏

    • @anillsally
      @anillsally 7 місяців тому +2

      ​@JacobandNichVlogs hey,because of this vid,I bought this same wacker...what kind of oil do you use in this machine?

    • @JacobandNichVlogs
      @JacobandNichVlogs  7 місяців тому +1

      @@anillsally 😁🙏
      NP 2 stroke engine oil

    • @anillsally
      @anillsally 7 місяців тому +1

      @JacobandNichVlogs lol...my bad,I watched the whole vid,thanks for replying.blessings overflown to you & your family 🙏

    • @rickeydeen5919
      @rickeydeen5919 Місяць тому

      ​@@anillsallyhow is it holding out?

  • @kerrycalderon6973
    @kerrycalderon6973 8 місяців тому +2

    Good job Jacob, i was so paying attention, after the video was done, i realize someone was at the door. lol. good one.

  • @suzych
    @suzych 8 місяців тому +1

    Good night fam 😊 keep up the great work. Awesome unboxing with detailed info 👍💯🥳🙏🏻

  • @PhillipTT
    @PhillipTT 8 місяців тому +1

    Rel hard wuk brother

  • @user-ch9js9xl5w
    @user-ch9js9xl5w 25 днів тому +1

    The video is helpful for beginners but my concern is where do i get spare parts in south like you said it is not a brand

    • @JacobandNichVlogs
      @JacobandNichVlogs  25 днів тому

      @@user-ch9js9xl5w most times u can find parts in small business/ shops, most of them sell universal part and it should work

  • @user-vu5zp6cu5p
    @user-vu5zp6cu5p 2 місяці тому

    Thanks for your help appreciate it!

  • @Monke_ish
    @Monke_ish 8 місяців тому +1

    Cousin you doing good

  • @Melonairgaming
    @Melonairgaming Місяць тому +1

    I bought my Whacker about 4 months now and used it once and today I tried starting it and it just starts and stops …..Do you know what might be the issue?

  • @valtonashby5368
    @valtonashby5368 19 днів тому +1

    i bought one of those cutter a while back but it needs that part where the pull cord is to start the cutter it melted where can i source parts ?

    • @JacobandNichVlogs
      @JacobandNichVlogs  19 днів тому

      @@valtonashby5368 years ago I got that part for 250 at D's in arouca, a brush cutter store on the eastern main road, traffic lights next to the police station

    • @valtonashby5368
      @valtonashby5368 19 днів тому +1

      @@JacobandNichVlogs thanks bro

  • @BiopticSniper
    @BiopticSniper 4 місяці тому +1

    Nice review

  • @user-cd8is8eh3z
    @user-cd8is8eh3z Місяць тому +1

    What are the sub parts in case of repairs

  • @righteousliving.7331
    @righteousliving.7331 4 місяці тому +2

    Bought for xmas and some one thief it in april....

  • @wusswuzz5818
    @wusswuzz5818 6 місяців тому +1

    That yard after the cut looked spanking nice. Do you operate it with the choke on after your start?

    • @JacobandNichVlogs
      @JacobandNichVlogs  6 місяців тому

      Thank you, 🙏 , with the choke off after it start it, what is working for you ? When it os on ?

    • @wusswuzz5818
      @wusswuzz5818 6 місяців тому +2

      @@JacobandNichVlogs I usually rent and on those the choke goes off automatically (sthil) but I saw this at pricesmart and thought it may be a good buy and last a while with good care so I bought it over the weekend, just set it up and will try it out tomorrow.

    • @JacobandNichVlogs
      @JacobandNichVlogs  6 місяців тому +1

      @@wusswuzz5818 ok nice 🙌😁 let me how how it working for you when u use it 🙏

    • @wusswuzz5818
      @wusswuzz5818 6 місяців тому +1

      @@JacobandNichVlogs I had a go at it today and this is a pretty nice tool. It Worked well, started with no issue, The only thing is it seems I have to run with clutch on/in down position. If I move it up/off it powers off. Will definitely have some fun with this one.

    • @JacobandNichVlogs
      @JacobandNichVlogs  6 місяців тому

      Happy to here it worked out 🙌🙏
      Stay safe fam and welcome to the Chanel

  • @user-vu5zp6cu5p
    @user-vu5zp6cu5p 29 днів тому

    Can u still use the Wacker if the two sm silver things in the Wacker head lost while I was using it?

    • @JacobandNichVlogs
      @JacobandNichVlogs  25 днів тому

      No, you won't be able to, it should cost u around $50 to get the parts back, take the head with u

    • @user-vu5zp6cu5p
      @user-vu5zp6cu5p 17 днів тому +2

      Thks we're do I take it? I'm from the East!

  • @christopherchanwaihong4296
    @christopherchanwaihong4296 2 місяці тому +1

    I bought one yesterday and paid 800. What is the oil mix

    • @JacobandNichVlogs
      @JacobandNichVlogs  2 місяці тому

      Use the bottle that comes in the box and u will be ok 😊🙏

  • @afrazmohammed8663
    @afrazmohammed8663 2 місяці тому +1

    Good day guys have a question how durable is this machine?

  • @christophercarthy3651
    @christophercarthy3651 5 місяців тому

    How do you use the measuring bottle to measure the fuel and the 2-stroke oil?

    • @JacobandNichVlogs
      @JacobandNichVlogs  5 місяців тому

      The first one is for gas and the shorter one is for oil , it's like a 30to 1 mix

  • @dianneharridass4003
    @dianneharridass4003 8 місяців тому +1

    Hi morning fam lazanya today

    • @JacobandNichVlogs
      @JacobandNichVlogs  8 місяців тому

      Good morning fam 👋😁
      Today we just made Pot Bake not sure about lunch yet